From: Lorenzo Bianconi <lorenzo@kernel.org>
To: linux-pci@vger.kernel.org
Cc: ryder.lee@mediatek.com, lpieralisi@kernel.org, kw@linux.com,
robh@kernel.org, bhelgaas@google.com,
linux-mediatek@lists.infradead.org, lorenzo.bianconi83@gmail.com,
linux-arm-kernel@lists.infradead.org,
krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
nbd@nbd.name, dd@embedd.com, upstream@airoha.com,
angelogioacchino.delregno@collabora.com
Subject: [PATCH 4/4] PCI: mediatek-gen3: Add Airoha EN7581 support
Date: Fri, 21 Jun 2024 16:48:50 +0200 [thread overview]
Message-ID: <f044eb44654522801d4a93e94918a32c72c4c49f.1718980864.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1718980864.git.lorenzo@kernel.org>
Introduce support for Airoha EN7581 pcie controller to mediatek-gen3
pcie controller driver.
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/pci/controller/Kconfig | 2 +-
drivers/pci/controller/pcie-mediatek-gen3.c | 84 ++++++++++++++++++++-
2 files changed, 84 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index e534c02ee34f..3bd6c9430010 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -196,7 +196,7 @@ config PCIE_MEDIATEK
config PCIE_MEDIATEK_GEN3
tristate "MediaTek Gen3 PCIe controller"
- depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
depends on PCI_MSI
help
Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 9842617795a9..2dacfed665c6 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -7,6 +7,7 @@
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/irq.h>
@@ -21,6 +22,8 @@
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
+#include <linux/of_pci.h>
+#include <linux/of_device.h>
#include "../pci.h"
@@ -29,6 +32,7 @@
#define PCI_CLASS(class) (class << 8)
#define PCIE_RC_MODE BIT(0)
+#define PCIE_EQ_PRESET_01_REF 0x100
#define PCIE_CFGNUM_REG 0x140
#define PCIE_CFG_DEVFN(devfn) ((devfn) & GENMASK(7, 0))
#define PCIE_CFG_BUS(bus) (((bus) << 8) & GENMASK(15, 8))
@@ -68,6 +72,7 @@
#define PCIE_MSI_SET_ENABLE_REG 0x190
#define PCIE_MSI_SET_ENABLE GENMASK(PCIE_MSI_SET_NUM - 1, 0)
+#define PCIE_PIPE4_PIE8_REG 0x338
#define PCIE_MSI_SET_BASE_REG 0xc00
#define PCIE_MSI_SET_OFFSET 0x10
#define PCIE_MSI_SET_STATUS_OFFSET 0x04
@@ -100,7 +105,7 @@
#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0)
#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2)
-#define MAX_NUM_PHY_RSTS 1
+#define MAX_NUM_PHY_RSTS 3
struct mtk_gen3_pcie;
@@ -848,6 +853,72 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
return 0;
}
+static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
+{
+ struct device *dev = pcie->dev;
+ int err;
+
+ writel_relaxed(0x23020133, pcie->base + 0x10044);
+ writel_relaxed(0x50500032, pcie->base + 0x15030);
+ writel_relaxed(0x50500032, pcie->base + 0x15130);
+
+ err = phy_init(pcie->phy);
+ if (err) {
+ dev_err(dev, "failed to initialize PHY\n");
+ return err;
+ }
+ mdelay(30);
+
+ err = phy_power_on(pcie->phy);
+ if (err) {
+ dev_err(dev, "failed to power on PHY\n");
+ goto err_phy_on;
+ }
+
+ err = reset_control_bulk_deassert(pcie->soc->phy_resets.num_rsts,
+ pcie->phy_resets);
+ if (err) {
+ dev_err(dev, "failed to deassert PHYs\n");
+ goto err_phy_deassert;
+ }
+ usleep_range(5000, 10000);
+
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+
+ err = clk_bulk_prepare(pcie->num_clks, pcie->clks);
+ if (err) {
+ dev_err(dev, "failed to prepare clock\n");
+ goto err_clk_prepare;
+ }
+
+ writel_relaxed(0x41474147, pcie->base + PCIE_EQ_PRESET_01_REF);
+ writel_relaxed(0x1018020f, pcie->base + PCIE_PIPE4_PIE8_REG);
+ mdelay(10);
+
+ err = clk_bulk_enable(pcie->num_clks, pcie->clks);
+ if (err) {
+ dev_err(dev, "failed to prepare clock\n");
+ goto err_clk_enable;
+ }
+
+ return 0;
+
+err_clk_enable:
+ clk_bulk_unprepare(pcie->num_clks, pcie->clks);
+err_clk_prepare:
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ reset_control_bulk_assert(pcie->soc->phy_resets.num_rsts,
+ pcie->phy_resets);
+err_phy_deassert:
+ phy_power_off(pcie->phy);
+err_phy_on:
+ phy_exit(pcie->phy);
+
+ return err;
+}
+
static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
{
struct device *dev = pcie->dev;
@@ -1117,8 +1188,19 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt8192 = {
},
};
+static const struct mtk_pcie_soc mtk_pcie_soc_en7581 = {
+ .power_up = mtk_pcie_en7581_power_up,
+ .phy_resets = {
+ .id[0] = "phy-lane0",
+ .id[1] = "phy-lane1",
+ .id[2] = "phy-lane2",
+ .num_rsts = 3,
+ },
+};
+
static const struct of_device_id mtk_pcie_of_match[] = {
{ .compatible = "mediatek,mt8192-pcie", .data = &mtk_pcie_soc_mt8192 },
+ { .compatible = "airoha,en7581-pcie", .data = &mtk_pcie_soc_en7581 },
{},
};
MODULE_DEVICE_TABLE(of, mtk_pcie_of_match);
--
2.45.2
next prev parent reply other threads:[~2024-06-21 14:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-21 14:48 [PATCH 0/4] Add Airoha EN7581 PCIE support Lorenzo Bianconi
2024-06-21 14:48 ` [PATCH 1/4] dt-bindings: PCI: mediatek-gen3: add support for Airoha EN7581 Lorenzo Bianconi
2024-06-22 12:04 ` Conor Dooley
2024-06-23 9:31 ` Lorenzo Bianconi
2024-06-21 14:48 ` [PATCH 2/4] PCI: mediatek-gen3: Add mtk_pcie_soc data structure Lorenzo Bianconi
2024-06-24 7:57 ` AngeloGioacchino Del Regno
2024-06-27 6:50 ` Lorenzo Bianconi
2024-06-21 14:48 ` [PATCH 3/4] PCI: mediatek-gen3: rely on reset_bulk APIs for phy reset lines Lorenzo Bianconi
2024-06-21 17:51 ` Bjorn Helgaas
2024-06-21 21:43 ` Lorenzo Bianconi
2024-06-24 8:01 ` AngeloGioacchino Del Regno
2024-06-27 7:03 ` Lorenzo Bianconi
2024-06-21 14:48 ` Lorenzo Bianconi [this message]
2024-06-21 18:02 ` [PATCH 4/4] PCI: mediatek-gen3: Add Airoha EN7581 support Bjorn Helgaas
2024-06-21 22:03 ` Lorenzo Bianconi
2024-06-24 7:55 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f044eb44654522801d4a93e94918a32c72c4c49f.1718980864.git.lorenzo@kernel.org \
--to=lorenzo@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bhelgaas@google.com \
--cc=dd@embedd.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.bianconi83@gmail.com \
--cc=lpieralisi@kernel.org \
--cc=nbd@nbd.name \
--cc=robh@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=upstream@airoha.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).