Re: [V2, 3/3] arm64: dts: sc7180: Add interconnect provider DT nodes

[Georgi Djakov <georgi.djakov@linaro.org>]

On 31.12.19 г. 10:58 ч., Odelu Kukatla wrote:
> Add the DT nodes for the network-on-chip interconnect buses found
> on sc7180-based platforms.
> ---
>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 96 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 96 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 3676bfd..077b1e5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -8,6 +8,7 @@
>   #include <dt-bindings/clock/qcom,gcc-sc7180.h>
>   #include <dt-bindings/clock/qcom,rpmh.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,sc7180.h>

This should be moved one line up if we want to keep the headers sorted.

>   #include <dt-bindings/phy/phy-qcom-qusb2.h>
>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>   
> @@ -1286,6 +1287,10 @@
>   				clock-names = "xo";
>   				#clock-cells = <1>;
>   			};
> +
> +			apps_bcm_voter: bcm_voter {
> +				compatible = "qcom,sc7180-bcm-voter";
> +			};
>   		};
>   
>   		cpufreq_hw: cpufreq@18323000 {
> @@ -1298,6 +1303,97 @@
>   
>   			#freq-domain-cells = <1>;
>   		};
> + > +		config_noc: interconnect@1500000 {

All DT nodes in this file are ordered by their address. Please move these up
to keep it consistent.

Thanks,
Georgi