From: Amit Sunil Dhamne <amitsd@google.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
gregkh@linuxfoundation.org, heikki.krogerus@linux.intel.com
Cc: dmitry.baryshkov@linaro.org, kyletso@google.com,
rdbabiera@google.com, badhri@google.com, linux@roeck-us.net,
xu.yang_2@nxp.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH v2 3/3] usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property
Date: Thu, 14 Nov 2024 11:59:41 -0800 [thread overview]
Message-ID: <f244542a-7160-4f05-acaa-0e2574ee289d@google.com> (raw)
In-Reply-To: <20241103034402.2460252-4-amitsd@google.com>
Hi Heikki,
On 11/2/24 8:43 PM, Amit Sunil Dhamne wrote:
> Add support for parsing DT time property "sink-bc12-completion-time-ms".
> This timer is used to relax the PD state machine during Sink attach to
> allow completion of Battery Charging (BC1.2) charger type detection in
> TCPC before PD negotiations. BC1.2 detection is a hardware mechanism to
> detect charger port type that is run by some controllers (such as
> "maxim,max33359") in parallel to Type-C connection state machines.
> This is to ensure that BC1.2 completes before PD is enabled as running
> BC1.2 in parallel with PD negotiation results in delays violating timer
> constraints in PD spec.
>
> This is an optional timer and will not add any delay unless explicitly
> set.
>
> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
> ---
> drivers/usb/typec/tcpm/tcpm.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index b3d5d1d48937..8b325b93b5a9 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -319,6 +319,7 @@ struct pd_timings {
> u32 sink_wait_cap_time;
> u32 ps_src_off_time;
> u32 cc_debounce_time;
> + u32 snk_bc12_cmpletion_time;
> };
>
> struct tcpm_port {
> @@ -4978,7 +4979,16 @@ static void run_state_machine(struct tcpm_port *port)
> if (ret < 0)
> tcpm_set_state(port, SNK_UNATTACHED, 0);
> else
> - tcpm_set_state(port, SNK_STARTUP, 0);
> + /*
> + * For Type C port controllers that use Battery Charging
> + * Detection (based on BCv1.2 spec) to detect USB
> + * charger type, add a delay of "snk_bc12_cmpletion_time"
> + * before transitioning to SNK_STARTUP to allow BC1.2
> + * detection to complete before PD is eventually enabled
> + * in later states.
> + */
> + tcpm_set_state(port, SNK_STARTUP,
> + port->timings.snk_bc12_cmpletion_time);
> break;
> case SNK_STARTUP:
> opmode = tcpm_get_pwr_opmode(port->polarity ?
> @@ -7090,6 +7100,10 @@ static void tcpm_fw_get_timings(struct tcpm_port *port, struct fwnode_handle *fw
> port->timings.cc_debounce_time = val;
> else
> port->timings.cc_debounce_time = PD_T_CC_DEBOUNCE;
> +
> + ret = fwnode_property_read_u32(fwnode, "sink-bc12-completion-time-ms", &val);
> + if (!ret)
> + port->timings.snk_bc12_cmpletion_time = val;
> }
>
> static int tcpm_fw_get_caps(struct tcpm_port *port, struct fwnode_handle *fwnode)
I wanted to gently follow up with you on this patchset if this looks
okay to you?
Thanks,
Amit
next prev parent reply other threads:[~2024-11-14 19:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-03 3:43 [PATCH v2 0/3] Add new time property for battery charger type detection Amit Sunil Dhamne
2024-11-03 3:43 ` [PATCH v2 1/3] dt-bindings: connector: Add time property for Sink BC12 detection completion Amit Sunil Dhamne
2024-11-03 3:43 ` [PATCH v2 2/3] dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property Amit Sunil Dhamne
2024-11-03 5:22 ` Rob Herring (Arm)
2024-11-04 14:41 ` Rob Herring
2024-11-03 3:43 ` [PATCH v2 3/3] usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property Amit Sunil Dhamne
2024-11-14 19:59 ` Amit Sunil Dhamne [this message]
2024-11-15 7:19 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f244542a-7160-4f05-acaa-0e2574ee289d@google.com \
--to=amitsd@google.com \
--cc=badhri@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzk+dt@kernel.org \
--cc=kyletso@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rdbabiera@google.com \
--cc=robh@kernel.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).