Re: [PATCH v4 2/2] dt-bindings: PCI: xilinx-nwl: Convert to YAML schemas of Xilinx NWL PCIe Root Port Bridge

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 07/11/2022 10:54, Thippeswamy Havalige wrote:
> Convert to YAML schemas for Xilinx NWL PCIe Root Port Bridge
> dt binding.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> ---
> Changes in v4:
> Dropped, msi-controller property as it comes from msi schema.
> Rearranged interrupts description as per example.
> Used same style of quotes.
> ---
>  .../bindings/pci/xilinx-nwl-pcie.txt          |  73 ---------
>  .../bindings/pci/xlnx,nwl-pcie.yaml           | 149 ++++++++++++++++++
>  2 files changed, 149 insertions(+), 73 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>  create mode 100644 Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> deleted file mode 100644
> index f56f8c58c5d9..000000000000
> --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -* Xilinx NWL PCIe Root Port Bridge DT description
> -
> -Required properties:
> -- compatible: Should contain "xlnx,nwl-pcie-2.11"
> -- #address-cells: Address representation for root ports, set to <3>
> -- #size-cells: Size representation for root ports, set to <2>
> -- #interrupt-cells: specifies the number of cells needed to encode an
> -	interrupt source. The value must be 1.
> -- reg: Should contain Bridge, PCIe Controller registers location,
> -	configuration space, and length
> -- reg-names: Must include the following entries:
> -	"breg": bridge registers
> -	"pcireg": PCIe controller registers
> -	"cfg": configuration space region
> -- device_type: must be "pci"
> -- interrupts: Should contain NWL PCIe interrupt
> -- interrupt-names: Must include the following entries:
> -	"msi1, msi0": interrupt asserted when an MSI is received
> -	"intx": interrupt asserted when a legacy interrupt is received
> -	"misc": interrupt asserted when miscellaneous interrupt is received
> -- interrupt-map-mask and interrupt-map: standard PCI properties to define the
> -	mapping of the PCI interface to interrupt numbers.
> -- ranges: ranges for the PCI memory regions (I/O space region is not
> -	supported by hardware)
> -	Please refer to the standard PCI bus binding document for a more
> -	detailed explanation
> -- msi-controller: indicates that this is MSI controller node
> -- msi-parent:  MSI parent of the root complex itself
> -- legacy-interrupt-controller: Interrupt controller device node for Legacy
> -	interrupts
> -	- interrupt-controller: identifies the node as an interrupt controller
> -	- #interrupt-cells: should be set to 1
> -	- #address-cells: specifies the number of cells needed to encode an
> -		address. The value must be 0.
> -
> -Optional properties:
> -- dma-coherent: present if DMA operations are coherent
> -- clocks: Input clock specifier. Refer to common clock bindings
> -
> -Example:
> -++++++++
> -
> -nwl_pcie: pcie@fd0e0000 {
> -	#address-cells = <3>;
> -	#size-cells = <2>;
> -	compatible = "xlnx,nwl-pcie-2.11";
> -	#interrupt-cells = <1>;
> -	msi-controller;
> -	device_type = "pci";
> -	interrupt-parent = <&gic>;
> -	interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
> -	interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
> -	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> -	interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
> -			<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
> -			<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
> -			<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
> -
> -	msi-parent = <&nwl_pcie>;
> -	reg = <0x0 0xfd0e0000 0x0 0x1000>,
> -	      <0x0 0xfd480000 0x0 0x1000>,
> -	      <0x80 0x00000000 0x0 0x1000000>;
> -	reg-names = "breg", "pcireg", "cfg";
> -	ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000  /* non-prefetchable memory */
> -		  0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
> -
> -	pcie_intc: legacy-interrupt-controller {
> -		interrupt-controller;
> -		#address-cells = <0>;
> -		#interrupt-cells = <1>;
> -	};
> -
> -};
> diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
> new file mode 100644
> index 000000000000..35c2d9fb3b9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
> @@ -0,0 +1,149 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx NWL PCIe Root Port Bridge
> +
> +maintainers:
> +  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: xlnx,nwl-pcie-2.11
> +
> +  reg:
> +    items:
> +      - description: PCIe bridge registers location.
> +      - description: PCIe Controller registers location.
> +      - description: PCIe Configuration space region.
> +
> +  reg-names:
> +    items:
> +      - const: breg
> +      - const: pcireg
> +      - const: cfg
> +
> +  interrupts:
> +    items:
> +      - description: interrupt asserted when miscellaneous interrupt is received
> +      - description: unused interrupt(dummy)
> +      - description: interrupt asserted when a legacy interrupt is received
> +      - description: msi1 interrupt asserted when an MSI is received
> +      - description: msi0 interrupt asserted when an MSI is received
> +
> +  interrupt-names:
> +    minItems: 4

This still does not match your interrupts. It should not be different.
Either you require 4 or 5 interrupts. Not 4 and 5...

> +    items:
> +      - const: misc
> +      - const: dummy
> +      - const: intx
> +      - const: msi1
> +      - const: msi0
> +
> +  interrupt-map-mask:
> +    items:
> +      - const: 0
> +      - const: 0
> +      - const: 0
> +      - const: 7
> +

Best regards,
Krzysztof