From: William Zhang <william.zhang@broadcom.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Anand Gore" <anand.gore@broadcom.com>,
"Kursad Oney" <kursad.oney@broadcom.com>,
"Florian Fainelli" <florian.fainelli@broadcom.com>,
"Rafał Miłecki" <rafal@milecki.pl>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Olivia Mackall" <olivia@selenic.com>,
"Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Florian Fainelli" <f.fainelli@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-crypto@vger.kernel.org
Subject: RE: [PATCH v3 07/12] ARM: dts: bcm63148: Add BCMBCA peripherals
Date: Mon, 12 May 2025 11:38:44 -0700 [thread overview]
Message-ID: <f347ff42d406ce1d378ea0cd1c118ce8@mail.gmail.com> (raw)
In-Reply-To: <20250512-bcmbca-peripherals-arm-v3-7-86f97ab4326f@linaro.org>
[-- Attachment #1: Type: text/plain, Size: 3956 bytes --]
> -----Original Message-----
> From: Linus Walleij <linus.walleij@linaro.org>
> Sent: Monday, May 12, 2025 5:06 AM
> To: Rob Herring <robh@kernel.org>; Krzysztof Kozlowski
> <krzk+dt@kernel.org>;
> Conor Dooley <conor+dt@kernel.org>; William Zhang
> <william.zhang@broadcom.com>; Anand Gore <anand.gore@broadcom.com>;
> Kursad Oney <kursad.oney@broadcom.com>; Florian Fainelli
> <florian.fainelli@broadcom.com>; Rafał Miłecki <rafal@milecki.pl>;
> Broadcom
> internal kernel review list <bcm-kernel-feedback-list@broadcom.com>;
> Olivia
> Mackall <olivia@selenic.com>; Ray Jui <rjui@broadcom.com>; Scott Branden
> <sbranden@broadcom.com>; Florian Fainelli <f.fainelli@gmail.com>
> Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-
> crypto@vger.kernel.org; Linus Walleij <linus.walleij@linaro.org>
> Subject: [PATCH v3 07/12] ARM: dts: bcm63148: Add BCMBCA peripherals
>
> All the BCMBCA SoCs share a set of peripherals at 0xff800000,
> albeit at slightly varying memory locations on the bus and
> with varying IRQ assignments.
>
> Add the GPIO, RNG and LED and DMA blocks for the
> BCM63148 based on the vendor files 63148_map_part.h and
> 63148_intr.h from the "bcmopen-consumer" code drop.
>
> This SoC has up to 160 possible GPIOs due to having 5
> registers with 32 GPIOs in each available.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> arch/arm/boot/dts/broadcom/bcm63148.dtsi | 64
> ++++++++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi
> b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
> index
> 53703827ee3fe58ead1dbe70536d7293ad842d0c..e071cddb28fc2888b8f408b4b
> c275290dd135642 100644
> --- a/arch/arm/boot/dts/broadcom/bcm63148.dtsi
> +++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
> @@ -99,6 +99,62 @@ bus@ff800000 {
> #size-cells = <1>;
> ranges = <0 0xfffe8000 0x8000>;
>
> + /* GPIOs 0 .. 31 */
> + gpio0: gpio@100 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x100 0x04>, <0x114 0x04>;
> + reg-names = "dirout", "dat";
> + gpio-controller;
> + #gpio-cells = <2>;
> + status = "disabled";
> + };
> +
> + /* GPIOs 32 .. 63 */
> + gpio1: gpio@104 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x104 0x04>, <0x118 0x04>;
> + reg-names = "dirout", "dat";
> + gpio-controller;
> + #gpio-cells = <2>;
> + status = "disabled";
> + };
> +
> + /* GPIOs 64 .. 95 */
> + gpio2: gpio@108 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x108 0x04>, <0x11c 0x04>;
> + reg-names = "dirout", "dat";
> + gpio-controller;
> + #gpio-cells = <2>;
> + status = "disabled";
> + };
> +
> + /* GPIOs 96 .. 127 */
> + gpio3: gpio@10c {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x10c 0x04>, <0x120 0x04>;
> + reg-names = "dirout", "dat";
> + gpio-controller;
> + #gpio-cells = <2>;
> + status = "disabled";
> + };
> +
> + /* GPIOs 128 .. 159 */
> + gpio4: gpio@110 {
> + compatible = "brcm,bcm6345-gpio";
> + reg = <0x110 0x04>, <0x124 0x04>;
> + reg-names = "dirout", "dat";
> + gpio-controller;
> + #gpio-cells = <2>;
> + status = "disabled";
> + };
> +
> + rng@300 {
> + compatible = "brcm,iproc-rng200";
> + reg = <0x300 0x28>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> uart0: serial@600 {
> compatible = "brcm,bcm6345-uart";
> reg = <0x600 0x20>;
> @@ -108,6 +164,14 @@ uart0: serial@600 {
> status = "disabled";
> };
>
> + leds: led-controller@700 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "brcm,bcm63138-leds";
> + reg = <0x700 0xdc>;
> + status = "disabled";
> + };
> +
> hsspi: spi@1000 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> --
> 2.49.0
Reviewed-by: William Zhang <william.zhang@broadcom.com>
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4199 bytes --]
next prev parent reply other threads:[~2025-05-12 18:38 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-12 12:05 [PATCH v3 00/12] ARM: bcm: Add some BCMBCA peripherals Linus Walleij
2025-05-12 12:05 ` [PATCH v3 01/12] ARM: dts: bcm6878: Correct UART0 IRQ number Linus Walleij
2025-05-12 18:33 ` William Zhang
2025-05-13 8:52 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 02/12] dt-bindings: rng: r200: Add interrupt property Linus Walleij
2025-05-13 8:52 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 03/12] ARM: dts: bcm6846: Add interrupt to RNG Linus Walleij
2025-05-12 18:34 ` William Zhang
2025-05-13 8:55 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 04/12] ARM: dts: bcm6855: Add BCMBCA peripherals Linus Walleij
2025-05-12 18:35 ` William Zhang
2025-05-13 8:55 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 05/12] ARM: dts: bcm6878: " Linus Walleij
2025-05-12 18:37 ` William Zhang
2025-05-13 8:55 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 06/12] ARM: dts: bcm63138: " Linus Walleij
2025-05-12 18:38 ` William Zhang
2025-05-13 8:55 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 07/12] ARM: dts: bcm63148: " Linus Walleij
2025-05-12 18:38 ` William Zhang [this message]
2025-05-13 8:56 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 08/12] ARM: dts: bcm63178: " Linus Walleij
2025-05-12 18:39 ` William Zhang
2025-05-13 8:57 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 09/12] ARM64: dts: bcm4908: " Linus Walleij
2025-05-12 18:42 ` William Zhang
2025-05-13 8:57 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 10/12] ARM64: dts: bcm6856: " Linus Walleij
2025-05-12 18:43 ` William Zhang
2025-05-13 8:58 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 11/12] ARM64: dts: bcm6858: " Linus Walleij
2025-05-12 18:44 ` William Zhang
2025-05-13 8:58 ` Florian Fainelli
2025-05-12 12:05 ` [PATCH v3 12/12] ARM64: dts: bcm63158: " Linus Walleij
2025-05-12 18:47 ` William Zhang
2025-05-13 8:58 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f347ff42d406ce1d378ea0cd1c118ce8@mail.gmail.com \
--to=william.zhang@broadcom.com \
--cc=anand.gore@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=florian.fainelli@broadcom.com \
--cc=krzk+dt@kernel.org \
--cc=kursad.oney@broadcom.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=olivia@selenic.com \
--cc=rafal@milecki.pl \
--cc=rjui@broadcom.com \
--cc=robh@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).