Re: [PATCH 1/2] dt-bindings: misc: bist: Add BIST dt-binding for TI K3 devices

[Neha Malcom Francis <n-francis@ti.com>]

Hi Krzysztof,

On 19/03/25 13:16, Krzysztof Kozlowski wrote:
> On 13/03/2025 12:14, Neha Malcom Francis wrote:
>> Hi Krzysztof
>>
>> On 29/11/24 14:45, Krzysztof Kozlowski wrote:
>>> On 29/11/2024 08:43, Neha Malcom Francis wrote:
>>>>>> +
>>>>>> +  power-domains:
>>>>>> +    maxItems: 1
>>>>>> +
>>>>>> +  ti,bist-instance:
>>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>>> +    description:
>>>>>> +      the BIST instance in the SoC represented as an integer
>>>>>
>>>>> No instance indices are allowed. Drop.
>>>>>
>>>>
>>>> Question on this, this is not a property that is driven by software but rather 
>>>> indicates which register sequences have to be picked up for triggering this test 
>>>> from this instance. So I don't see how I can workaround this without getting 
>>>> this number. Or maybe call it ID rather than instance?
>>>
>>> I don't understand how the device operates, so what is exactly behind
>>> some sequences of registers for triggering this test. You described
>>> property as index or ID of one instance of the block. That's not what we
>>> want in the binding. That's said maybe other, different hardware
>>> characteristic is behind, who knows. Or maybe it's about callers... or
>>> maybe that's not hardware property at all, but runtime OS, who knows.
>>>
>>
>> Sorry for such a late reply, but I was hoping to get more details on
>> this "ID" and never got back to the thread...
>>
>> The best way I can describe is this device (BIST) runs a safety
>> diagnostic test on a bunch of processors/blocks (let's call them
>> targets). There's a mapping between the instance of this device and the
>> targets it will run the test. This ID was essentially letting the BIST
>> driver know which are these targets.
> 
> 
> So you want to configure some target? Then this is your property. If you
> want to configure 'foo' difference in DT, you do not write 'bar'...
> 

So the difficulty in doing this is, what I mentioned in the earlier
email just copying it over again:

"Yet another way would be the BIST points out the targets it controls via
their phandles in its node... but this approach would trigger the probe
of these targets before the test runs on them. And in hardware, the test
must run only one before the device is used, else we see indefinite
behavior."

Property that has a list of strings (targets) instead of phandles maybe?
Would that be acceptable?

> Anyway, no clue, original emails are long time not in my inbox. Context
> disappeared also long time ago.
> 

Completely understand, delay from my end, sorry!

> 
> Best regards,
> Krzysztof

-- 
Thanking You
Neha Malcom Francis