Re: [PATCH 5/7] arm64: dts: mediatek: mt8195-demo: enable ethernet

[Matthias Brugger <matthias.bgg@gmail.com>]

On 27/04/2022 08:25, Macpaul Lin wrote:
> On Tue, 2022-04-26 at 15:41 +0200, Fabien Parent wrote:
>> Enable ethernet on the MT8195 demo board.
>>
>> Signed-off-by: Fabien Parent <fparent@baylibre.com>
>> ---
>>   arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 108
>> +++++++++++++++++++
>>   1 file changed, 108 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>> b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>> index 08cab3b3943b..0b7985486e2a 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>> @@ -80,6 +80,30 @@ optee_reserved: optee@43200000 {
>>   	};
>>   };
>>   
>> +&eth {
>> +	phy-mode = "rgmii-rxid";
>> +	phy-handle = <&eth_phy>;
>> +	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
>> +	snps,reset-delays-us = <0 10000 10000>;
>> +	mediatek,tx-delay-ps = <2030>;
>> +	pinctrl-names = "default", "sleep";
>> +	pinctrl-0 = <&eth_default_pins>;
>> +	pinctrl-1 = <&eth_sleep_pins>;
>> +	status = "okay";
>> +
>> +	mdio {
>> +		compatible = "snps,dwmac-mdio";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		eth_phy: phy@1 {
>> +			compatible = "ethernet-phy-id001c.c916";
>> +			#phy-cells = <0>;
>> +			reg = <0x1>;
>> +		};
>> +	};
>> +};
>> +
>>   &i2c6 {
>>   	clock-frequency = <400000>;
>>   	pinctrl-0 = <&i2c6_pins>;
>> @@ -260,6 +284,90 @@ &mt6359_vsram_others_ldo_reg {
>>   };
>>   
>>   &pio {
>> +	eth_default_pins: eth-default-pins {
>> +		pins-cc {
>> +			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
>> +				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
>> +				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
>> +				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
>> +			drive-strength = <MTK_DRIVE_8mA>;
>> +		};
>> +
>> +		pins-mdio {
>> +			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
>> +				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
>> +			input-enable;
>> +		};
>> +
>> +		pins-phy-reset {
>> +			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
>> +		};
>> +
>> +		pins-power {
>> +			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
>> +				 <PINMUX_GPIO92__FUNC_GPIO92>;
>> +			output-high;
>> +		};
>> +
>> +		pins-rxd {
>> +			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
>> +				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
>> +				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
>> +				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
>> +		};
>> +
>> +		pins-txd {
>> +			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
>> +				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
>> +				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
>> +				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
>> +			drive-strength = <MTK_DRIVE_8mA>;
>> +		};
>> +	};
>> +
>> +	eth_sleep_pins: eth-sleep-pins {
>> +		pins-cc {
>> +			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
>> +				 <PINMUX_GPIO88__FUNC_GPIO88>,
>> +				 <PINMUX_GPIO87__FUNC_GPIO87>,
>> +				 <PINMUX_GPIO86__FUNC_GPIO86>;
>> +		};
>> +
>> +		pins-mdio {
>> +			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
>> +				 <PINMUX_GPIO90__FUNC_GPIO90>;
>> +			input-disable;
>> +			bias-disable;
>> +		};
>> +
>> +		pins-phy-reset {
>> +			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
>> +			input-disable;
>> +			bias-disable;
>> +		};
>> +
>> +		pins-power {
>> +			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
>> +				 <PINMUX_GPIO92__FUNC_GPIO92>;
>> +			input-disable;
>> +			bias-disable;
>> +		};
>> +
>> +		pins-rxd {
>> +			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
>> +				 <PINMUX_GPIO82__FUNC_GPIO82>,
>> +				 <PINMUX_GPIO83__FUNC_GPIO83>,
>> +				 <PINMUX_GPIO84__FUNC_GPIO84>;
>> +		};
>> +
>> +		pins-txd {
>> +			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
>> +				 <PINMUX_GPIO78__FUNC_GPIO78>,
>> +				 <PINMUX_GPIO79__FUNC_GPIO79>,
>> +				 <PINMUX_GPIO80__FUNC_GPIO80>;
>> +		};
>> +	};
>> +
>>   	gpio_keys_pins: gpio-keys-pins {
>>   		pins {
>>   			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
> 
> Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
> 

I get the following error:
Error: arch/arm64/boot/dts/mediatek/mt8195.dtsi:582.26-27 syntax error



How did you test?

Regards,
Matthias