Re: [PATCH 1/3] dt-bindings: clock: s32g: add uSDHC clock IDs

[Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>]

On 1/21/24 15:32, Conor Dooley wrote:
> On Fri, Jan 19, 2024 at 11:25:57PM +0200, Ghennadi Procopciuc wrote:
>> On 1/19/24 18:14, Conor Dooley wrote:
>>> On Fri, Jan 19, 2024 at 04:11:37PM +0000, Conor Dooley wrote:
>>>> On Fri, Jan 19, 2024 at 03:02:28PM +0200, Ghennadi Procopciuc (OSS) wrote:
>>>>> From: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
>>>>>
>>>>> Add the SCMI clock IDs for the uSDHC controller present on
>>>>> S32G SoCs.
>>>>>
>>>>> Signed-off-by: Ciprian Costea <ciprianmarian.costea@nxp.com>
>>>>> Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
>>>>> ---
>>>>>  include/dt-bindings/clock/s32g-scmi-clock.h | 14 ++++++++++++++
>>>>>  1 file changed, 14 insertions(+)
>>>>>  create mode 100644 include/dt-bindings/clock/s32g-scmi-clock.h
>>>>>
>>>>> diff --git a/include/dt-bindings/clock/s32g-scmi-clock.h b/include/dt-bindings/clock/s32g-scmi-clock.h
>>>>> new file mode 100644
>>>>> index 000000000000..739f98a924c3
>>>>> --- /dev/null
>>>>> +++ b/include/dt-bindings/clock/s32g-scmi-clock.h
>>>>> @@ -0,0 +1,14 @@
>>>>> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
>>>>> +/*
>>>>> + * Copyright 2020-2024 NXP
>>>>> + */
>>>>> +#ifndef _DT_BINDINGS_SCMI_CLK_S32G_H
>>>>> +#define _DT_BINDINGS_SCMI_CLK_S32G_H
>>>>> +
>>>>> +/* uSDHC */
>>>>> +#define S32G_SCMI_CLK_USDHC_AHB		31
>>>>> +#define S32G_SCMI_CLK_USDHC_MODULE	32
>>>>> +#define S32G_SCMI_CLK_USDHC_CORE	33
>>>>> +#define S32G_SCMI_CLK_USDHC_MOD32K	34
>>>>
>>>> Why do these numbers not start at 0?
>>>
>>> Ah, because these are the SCMI IDs directly. If these are numbers that
>>> are in the TRM, just use the numbers directly - there's no need to
>>> create bindings for that.
>>>
>>
>> Hi Conor,
>>
>> I appreciate you taking the time to review the proposed changes. I
>> wanted to clarify that the IDs mentioned in the header are SCMI IDs
>> exported by the TF-A and are utilized by the second patch of this
>> series. These IDs are for the uSDHC controller to control its clocks. As
>> other SoCs use this model, I have included all the necessary IDs in a
>> dedicated header file:
>> - rk3588s     (arch/arm64/boot/dts/rockchip/rk3588s.dtsi:97 [0])
>> - stm32mp157c (arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts:73 [1])
>> - stm32mp131  (arch/arm/boot/dts/st/stm32mp131.dtsi:1372 [2])
>>
>> Should I remove the header and use raw numbers in the uSDHC node?
> 
> IMO, yes. There's no abstraction/binding being created here if they're
> the SCMI IDs.
> 
> Thanks,
> conor.

Thank you for letting me know. I will make sure to include this change
in the second version of the patchset.

>> For
>> example:
>>> +		usdhc0: mmc@402f0000 {
>>> +			compatible = "nxp,s32g2-usdhc";
>>> +			reg = <0x402f0000 0x1000>;
>>> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>>> +			clocks = <&clks 32>,
>>> +				 <&clks 31>,
>>> +				 <&clks 33>;
>>> +			clock-names = "ipg", "ahb", "per";
>>> +			bus-width = <8>;
>>> +			status = "disabled";
>>> +		};
>>
>> [0]
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3588s.dtsi#n97
>> [1]
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts#n73
>> [2]
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/st/stm32mp131.dtsi#n1372
>>
>> -- 
>> Regards,
>> Ghennadi
>>

-- 
Regards,
Ghennadi