Re: [PATCH v15 2/4] dt-bindings: spmi: document binding for the Mediatek SPMI controller

[James Lo <james.lo@mediatek.com>]

On Mon, 2021-11-15 at 07:42 -0600, Rob Herring wrote:
> On Mon, 15 Nov 2021 12:20:28 +0800, James Lo wrote:
> > This adds documentation for the SPMI controller found on Mediatek
> > SoCs.
> > 
> > Signed-off-by: James Lo <james.lo@mediatek.com>
> > Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> > ---
> >  .../bindings/spmi/mtk,spmi-mtk-pmif.yaml      | 76
> > +++++++++++++++++++
> >  1 file changed, 76 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-
> pmif.example.dt.yaml: spmi@10027000: reg: [[268595200, 3584],
> [268603392, 256]] is too long
> 	From schema: /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/spmi/spmi.yaml
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-
> pmif.example.dt.yaml: spmi@10027000: reg: [[268595200, 3584],
> [268603392, 256]] is too long
> 	From schema: /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See 
> https://urldefense.com/v3/__https://patchwork.ozlabs.org/patch/1555114__;!!CTRNKA9wMg0ARbw!0y2jw2KWA7dbbFP4B9bbycyT0PxWYrQ0KAUovVW46dRLqIfXI2maZrfVt1KSWIC1$
>  
> 
> This check can fail if there are any dependencies. The base for a
> patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up
> to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
> 

Dear Rob,

Due to [2/4] depends on [1/4], 

Can I only send [1/4] first ?

(After [1/4] is approved, and I will send [2/4][3/4][4/4] as V16.)

Or, could you please give us other suggestion ?

Many thanks