Re: [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards

[Gatien CHEVALLIER <gatien.chevallier@foss.st.com>]

Hello Ahmad,

Sorry for the delay :)

On 2/13/23 12:27, Ahmad Fatoum wrote:
> Hello Gatien,
> 
> On 13.02.23 11:54, Gatien CHEVALLIER wrote:
>> On 2/9/23 09:10, Ahmad Fatoum wrote:
>>> On 09.02.23 08:46, Ahmad Fatoum wrote:
>>>> Hello Gatien,
>>>>
>>>> On 27.01.23 17:40, Gatien Chevallier wrote:
>>>>> The STM32 System Bus is an internal bus on which devices are connected.
>>>>> ETZPC is a peripheral overseeing the firewall bus that configures
>>>>> and control access to the peripherals connected on it.
>>>>>
>>>>> For more information on which peripheral is securable, please read
>>>>> the STM32MP13 reference manual.
>>>>
>>>> Diff is way too big. Please split up the alphabetic reordering into its
>>>> own commit, so actual functional changes are apparent.
>>>
>>> Ah, I see now that you are moving securable peripherals into a new bus.
>>> I share Uwe's confusion of considering the ETZPC as bus.
>>>
>>> Does this configuration even change dynamically? Why can't you implement
>>> this binding in the bootloader and have Linux only see a DT where unavailable
>>> nodes are status = "disabled"; secure-status = "okay"?
>>>
>>> For inspiration, see barebox' device tree fixups when devices are disabled
>>> per fuse:
>>>
>>>     https://elixir.bootlin.com/barebox/v2023.01.0/source/drivers/base/featctrl.c#L122
>>>
>>> Cheers,
>>> Ahmad
>>
>> This configuration can change dynamically. The binding will be implemented in the bootloader, where the ETZPC is already implemented as a bus in our downstream.
>>
>> I find the mentionned example valid.
>>
>> Now, why is it a bus? :D
>>
>> It is the result of the discussion on the previous submission by Benjamin (Sorry for the lack of link but I saw that you participated on these threads)+ we need the bus mechanism to control whether a subnode should be probed or not. You can see it as a firewall bus.
>>
>> The ETZPC relies on the ARM TrustZone extension to the AHB bus and propagation through bridges to the APB bus. Therefore, I find it relevant to consider it as a bus, what is your opinion?
>>
>> This patchset is a first step to the implementation of an API to control accesses dynamically.
> 
> I still don't get what's dynamic about this. Either:
> 
>    - Configuration _can_ change while Linux is running: You'll need to do
>      way more than what your current bus provides to somwhow synchronize state
>      with the secure monitor; otherwise a newly secured device will cause the driver
>      to trigger data aborts that you'll have to handle and unbind the driver.
>      (like if a USB drive is yanked out).
> 
>    - Configuration _can't_ change while Linux is running: You can have the bootloader
>      fixup the device tree and Linux need not care at all about devices that the
>      ETZPC is securing.
> 
> My understanding is that the latter is your use case, so I don't see why we
> even need the normal world to be aware of the partitioning.
> 
> Cheers,
> Ahmad
> 
What about the case where we do not have a U-Boot/bootloader to fixup 
the device tree?

On the other hand, ETZPC is a hardware firewall and is on the bus. 
Therefore, shouldn't it be represented as a bus in the file that 
describes the hardware?

Best regards,
Gatien

>>
>>>
>>>>
>>>> Thanks,
>>>> Ahmad
>>>>
>>>>>
>>>>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>>>>> ---
>>>>>
>>>>> No changes in V2.
>>>>>
>>>>> Changes in V3:
>>>>>      -Use appriopriate node name: bus
>>>>>
>>>>>    arch/arm/boot/dts/stm32mp131.dtsi  | 407 +++++++++++++++--------------
>>>>>    arch/arm/boot/dts/stm32mp133.dtsi  |  51 ++--
>>>>>    arch/arm/boot/dts/stm32mp13xc.dtsi |  19 +-
>>>>>    arch/arm/boot/dts/stm32mp13xf.dtsi |  18 +-
>>>>>    4 files changed, 258 insertions(+), 237 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
>>>>> index accc3824f7e9..24462a647101 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp131.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp131.dtsi
>>>>> @@ -253,148 +253,6 @@ dmamux1: dma-router@48002000 {
>>>>>                dma-channels = <16>;
>>>>>            };
>>>>>    -        adc_2: adc@48004000 {
>>>>> -            compatible = "st,stm32mp13-adc-core";
>>>>> -            reg = <0x48004000 0x400>;
>>>>> -            interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc ADC2>, <&rcc ADC2_K>;
>>>>> -            clock-names = "bus", "adc";
>>>>> -            interrupt-controller;
>>>>> -            #interrupt-cells = <1>;
>>>>> -            #address-cells = <1>;
>>>>> -            #size-cells = <0>;
>>>>> -            status = "disabled";
>>>>> -
>>>>> -            adc2: adc@0 {
>>>>> -                compatible = "st,stm32mp13-adc";
>>>>> -                #io-channel-cells = <1>;
>>>>> -                #address-cells = <1>;
>>>>> -                #size-cells = <0>;
>>>>> -                reg = <0x0>;
>>>>> -                interrupt-parent = <&adc_2>;
>>>>> -                interrupts = <0>;
>>>>> -                dmas = <&dmamux1 10 0x400 0x80000001>;
>>>>> -                dma-names = "rx";
>>>>> -                status = "disabled";
>>>>> -
>>>>> -                channel@13 {
>>>>> -                    reg = <13>;
>>>>> -                    label = "vrefint";
>>>>> -                };
>>>>> -                channel@14 {
>>>>> -                    reg = <14>;
>>>>> -                    label = "vddcore";
>>>>> -                };
>>>>> -                channel@16 {
>>>>> -                    reg = <16>;
>>>>> -                    label = "vddcpu";
>>>>> -                };
>>>>> -                channel@17 {
>>>>> -                    reg = <17>;
>>>>> -                    label = "vddq_ddr";
>>>>> -                };
>>>>> -            };
>>>>> -        };
>>>>> -
>>>>> -        usbotg_hs: usb@49000000 {
>>>>> -            compatible = "st,stm32mp15-hsotg", "snps,dwc2";
>>>>> -            reg = <0x49000000 0x40000>;
>>>>> -            clocks = <&rcc USBO_K>;
>>>>> -            clock-names = "otg";
>>>>> -            resets = <&rcc USBO_R>;
>>>>> -            reset-names = "dwc2";
>>>>> -            interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            g-rx-fifo-size = <512>;
>>>>> -            g-np-tx-fifo-size = <32>;
>>>>> -            g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
>>>>> -            dr_mode = "otg";
>>>>> -            otg-rev = <0x200>;
>>>>> -            usb33d-supply = <&usb33>;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>> -        spi4: spi@4c002000 {
>>>>> -            compatible = "st,stm32h7-spi";
>>>>> -            reg = <0x4c002000 0x400>;
>>>>> -            interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc SPI4_K>;
>>>>> -            resets = <&rcc SPI4_R>;
>>>>> -            #address-cells = <1>;
>>>>> -            #size-cells = <0>;
>>>>> -            dmas = <&dmamux1 83 0x400 0x01>,
>>>>> -                   <&dmamux1 84 0x400 0x01>;
>>>>> -            dma-names = "rx", "tx";
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>> -        spi5: spi@4c003000 {
>>>>> -            compatible = "st,stm32h7-spi";
>>>>> -            reg = <0x4c003000 0x400>;
>>>>> -            interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc SPI5_K>;
>>>>> -            resets = <&rcc SPI5_R>;
>>>>> -            #address-cells = <1>;
>>>>> -            #size-cells = <0>;
>>>>> -            dmas = <&dmamux1 85 0x400 0x01>,
>>>>> -                   <&dmamux1 86 0x400 0x01>;
>>>>> -            dma-names = "rx", "tx";
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>> -        i2c3: i2c@4c004000 {
>>>>> -            compatible = "st,stm32mp13-i2c";
>>>>> -            reg = <0x4c004000 0x400>;
>>>>> -            interrupt-names = "event", "error";
>>>>> -            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>> -                     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc I2C3_K>;
>>>>> -            resets = <&rcc I2C3_R>;
>>>>> -            #address-cells = <1>;
>>>>> -            #size-cells = <0>;
>>>>> -            dmas = <&dmamux1 73 0x400 0x1>,
>>>>> -                   <&dmamux1 74 0x400 0x1>;
>>>>> -            dma-names = "rx", "tx";
>>>>> -            st,syscfg-fmp = <&syscfg 0x4 0x4>;
>>>>> -            i2c-analog-filter;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>> -        i2c4: i2c@4c005000 {
>>>>> -            compatible = "st,stm32mp13-i2c";
>>>>> -            reg = <0x4c005000 0x400>;
>>>>> -            interrupt-names = "event", "error";
>>>>> -            interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>>>>> -                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc I2C4_K>;
>>>>> -            resets = <&rcc I2C4_R>;
>>>>> -            #address-cells = <1>;
>>>>> -            #size-cells = <0>;
>>>>> -            dmas = <&dmamux1 75 0x400 0x1>,
>>>>> -                   <&dmamux1 76 0x400 0x1>;
>>>>> -            dma-names = "rx", "tx";
>>>>> -            st,syscfg-fmp = <&syscfg 0x4 0x8>;
>>>>> -            i2c-analog-filter;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>> -        i2c5: i2c@4c006000 {
>>>>> -            compatible = "st,stm32mp13-i2c";
>>>>> -            reg = <0x4c006000 0x400>;
>>>>> -            interrupt-names = "event", "error";
>>>>> -            interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>> -                     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc I2C5_K>;
>>>>> -            resets = <&rcc I2C5_R>;
>>>>> -            #address-cells = <1>;
>>>>> -            #size-cells = <0>;
>>>>> -            dmas = <&dmamux1 115 0x400 0x1>,
>>>>> -                   <&dmamux1 116 0x400 0x1>;
>>>>> -            dma-names = "rx", "tx";
>>>>> -            st,syscfg-fmp = <&syscfg 0x4 0x10>;
>>>>> -            i2c-analog-filter;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>>            rcc: rcc@50000000 {
>>>>>                compatible = "st,stm32mp13-rcc", "syscon";
>>>>>                reg = <0x50000000 0x1000>;
>>>>> @@ -431,34 +289,6 @@ mdma: dma-controller@58000000 {
>>>>>                dma-requests = <48>;
>>>>>            };
>>>>>    -        sdmmc1: mmc@58005000 {
>>>>> -            compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> -            arm,primecell-periphid = <0x20253180>;
>>>>> -            reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
>>>>> -            interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc SDMMC1_K>;
>>>>> -            clock-names = "apb_pclk";
>>>>> -            resets = <&rcc SDMMC1_R>;
>>>>> -            cap-sd-highspeed;
>>>>> -            cap-mmc-highspeed;
>>>>> -            max-frequency = <130000000>;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>> -        sdmmc2: mmc@58007000 {
>>>>> -            compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> -            arm,primecell-periphid = <0x20253180>;
>>>>> -            reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
>>>>> -            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc SDMMC2_K>;
>>>>> -            clock-names = "apb_pclk";
>>>>> -            resets = <&rcc SDMMC2_R>;
>>>>> -            cap-sd-highspeed;
>>>>> -            cap-mmc-highspeed;
>>>>> -            max-frequency = <130000000>;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> -
>>>>>            usbh_ohci: usb@5800c000 {
>>>>>                compatible = "generic-ohci";
>>>>>                reg = <0x5800c000 0x1000>;
>>>>> @@ -486,29 +316,6 @@ iwdg2: watchdog@5a002000 {
>>>>>                status = "disabled";
>>>>>            };
>>>>>    -        usbphyc: usbphyc@5a006000 {
>>>>> -            #address-cells = <1>;
>>>>> -            #size-cells = <0>;
>>>>> -            #clock-cells = <0>;
>>>>> -            compatible = "st,stm32mp1-usbphyc";
>>>>> -            reg = <0x5a006000 0x1000>;
>>>>> -            clocks = <&rcc USBPHY_K>;
>>>>> -            resets = <&rcc USBPHY_R>;
>>>>> -            vdda1v1-supply = <&reg11>;
>>>>> -            vdda1v8-supply = <&reg18>;
>>>>> -            status = "disabled";
>>>>> -
>>>>> -            usbphyc_port0: usb-phy@0 {
>>>>> -                #phy-cells = <0>;
>>>>> -                reg = <0>;
>>>>> -            };
>>>>> -
>>>>> -            usbphyc_port1: usb-phy@1 {
>>>>> -                #phy-cells = <1>;
>>>>> -                reg = <1>;
>>>>> -            };
>>>>> -        };
>>>>> -
>>>>>            rtc: rtc@5c004000 {
>>>>>                compatible = "st,stm32mp1-rtc";
>>>>>                reg = <0x5c004000 0x400>;
>>>>> @@ -536,6 +343,220 @@ ts_cal2: calib@5e {
>>>>>                };
>>>>>            };
>>>>>    +        etzpc: bus@5c007000 {
>>>>> +            compatible = "st,stm32mp13-sys-bus";
>>>>> +            reg = <0x5c007000 0x400>;
>>>>> +            #address-cells = <1>;
>>>>> +            #size-cells = <1>;
>>>>> +            feature-domain-controller;
>>>>> +            #feature-domain-cells = <1>;
>>>>> +            ranges;
>>>>> +
>>>>> +            adc_2: adc@48004000 {
>>>>> +                compatible = "st,stm32mp13-adc-core";
>>>>> +                reg = <0x48004000 0x400>;
>>>>> +                interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc ADC2>, <&rcc ADC2_K>;
>>>>> +                clock-names = "bus", "adc";
>>>>> +                interrupt-controller;
>>>>> +                #interrupt-cells = <1>;
>>>>> +                #address-cells = <1>;
>>>>> +                #size-cells = <0>;
>>>>> +                feature-domains = <&etzpc 33>;
>>>>> +                status = "disabled";
>>>>> +
>>>>> +                adc2: adc@0 {
>>>>> +                    compatible = "st,stm32mp13-adc";
>>>>> +                    #io-channel-cells = <1>;
>>>>> +                    #address-cells = <1>;
>>>>> +                    #size-cells = <0>;
>>>>> +                    reg = <0x0>;
>>>>> +                    interrupt-parent = <&adc_2>;
>>>>> +                    interrupts = <0>;
>>>>> +                    dmas = <&dmamux1 10 0x400 0x80000001>;
>>>>> +                    dma-names = "rx";
>>>>> +                    status = "disabled";
>>>>> +
>>>>> +                    channel@13 {
>>>>> +                        reg = <13>;
>>>>> +                        label = "vrefint";
>>>>> +                    };
>>>>> +                    channel@14 {
>>>>> +                        reg = <14>;
>>>>> +                        label = "vddcore";
>>>>> +                    };
>>>>> +                    channel@16 {
>>>>> +                        reg = <16>;
>>>>> +                        label = "vddcpu";
>>>>> +                    };
>>>>> +                    channel@17 {
>>>>> +                        reg = <17>;
>>>>> +                        label = "vddq_ddr";
>>>>> +                    };
>>>>> +                };
>>>>> +            };
>>>>> +
>>>>> +            usbotg_hs: usb@49000000 {
>>>>> +                compatible = "st,stm32mp15-hsotg", "snps,dwc2";
>>>>> +                reg = <0x49000000 0x40000>;
>>>>> +                clocks = <&rcc USBO_K>;
>>>>> +                clock-names = "otg";
>>>>> +                resets = <&rcc USBO_R>;
>>>>> +                reset-names = "dwc2";
>>>>> +                interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                g-rx-fifo-size = <512>;
>>>>> +                g-np-tx-fifo-size = <32>;
>>>>> +                g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
>>>>> +                dr_mode = "otg";
>>>>> +                otg-rev = <0x200>;
>>>>> +                usb33d-supply = <&usb33>;
>>>>> +                feature-domains = <&etzpc 34>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            spi4: spi@4c002000 {
>>>>> +                compatible = "st,stm32h7-spi";
>>>>> +                reg = <0x4c002000 0x400>;
>>>>> +                interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc SPI4_K>;
>>>>> +                resets = <&rcc SPI4_R>;
>>>>> +                #address-cells = <1>;
>>>>> +                #size-cells = <0>;
>>>>> +                dmas = <&dmamux1 83 0x400 0x01>,
>>>>> +                       <&dmamux1 84 0x400 0x01>;
>>>>> +                dma-names = "rx", "tx";
>>>>> +                feature-domains = <&etzpc 18>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            spi5: spi@4c003000 {
>>>>> +                compatible = "st,stm32h7-spi";
>>>>> +                reg = <0x4c003000 0x400>;
>>>>> +                interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc SPI5_K>;
>>>>> +                resets = <&rcc SPI5_R>;
>>>>> +                #address-cells = <1>;
>>>>> +                #size-cells = <0>;
>>>>> +                dmas = <&dmamux1 85 0x400 0x01>,
>>>>> +                       <&dmamux1 86 0x400 0x01>;
>>>>> +                dma-names = "rx", "tx";
>>>>> +                feature-domains = <&etzpc 19>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            i2c3: i2c@4c004000 {
>>>>> +                compatible = "st,stm32mp13-i2c";
>>>>> +                reg = <0x4c004000 0x400>;
>>>>> +                interrupt-names = "event", "error";
>>>>> +                interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc I2C3_K>;
>>>>> +                resets = <&rcc I2C3_R>;
>>>>> +                #address-cells = <1>;
>>>>> +                #size-cells = <0>;
>>>>> +                dmas = <&dmamux1 73 0x400 0x1>,
>>>>> +                       <&dmamux1 74 0x400 0x1>;
>>>>> +                dma-names = "rx", "tx";
>>>>> +                st,syscfg-fmp = <&syscfg 0x4 0x4>;
>>>>> +                i2c-analog-filter;
>>>>> +                feature-domains = <&etzpc 20>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            i2c4: i2c@4c005000 {
>>>>> +                compatible = "st,stm32mp13-i2c";
>>>>> +                reg = <0x4c005000 0x400>;
>>>>> +                interrupt-names = "event", "error";
>>>>> +                interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +                         <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc I2C4_K>;
>>>>> +                resets = <&rcc I2C4_R>;
>>>>> +                #address-cells = <1>;
>>>>> +                #size-cells = <0>;
>>>>> +                dmas = <&dmamux1 75 0x400 0x1>,
>>>>> +                       <&dmamux1 76 0x400 0x1>;
>>>>> +                dma-names = "rx", "tx";
>>>>> +                st,syscfg-fmp = <&syscfg 0x4 0x8>;
>>>>> +                i2c-analog-filter;
>>>>> +                feature-domains = <&etzpc 21>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            i2c5: i2c@4c006000 {
>>>>> +                compatible = "st,stm32mp13-i2c";
>>>>> +                reg = <0x4c006000 0x400>;
>>>>> +                interrupt-names = "event", "error";
>>>>> +                interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +                         <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc I2C5_K>;
>>>>> +                resets = <&rcc I2C5_R>;
>>>>> +                #address-cells = <1>;
>>>>> +                #size-cells = <0>;
>>>>> +                dmas = <&dmamux1 115 0x400 0x1>,
>>>>> +                       <&dmamux1 116 0x400 0x1>;
>>>>> +                dma-names = "rx", "tx";
>>>>> +                st,syscfg-fmp = <&syscfg 0x4 0x10>;
>>>>> +                i2c-analog-filter;
>>>>> +                feature-domains = <&etzpc 22>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            sdmmc1: mmc@58005000 {
>>>>> +                compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> +                arm,primecell-periphid = <0x20253180>;
>>>>> +                reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
>>>>> +                interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc SDMMC1_K>;
>>>>> +                clock-names = "apb_pclk";
>>>>> +                resets = <&rcc SDMMC1_R>;
>>>>> +                cap-sd-highspeed;
>>>>> +                cap-mmc-highspeed;
>>>>> +                max-frequency = <130000000>;
>>>>> +                feature-domains = <&etzpc 50>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            sdmmc2: mmc@58007000 {
>>>>> +                compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
>>>>> +                arm,primecell-periphid = <0x20253180>;
>>>>> +                reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
>>>>> +                interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +                clocks = <&rcc SDMMC2_K>;
>>>>> +                clock-names = "apb_pclk";
>>>>> +                resets = <&rcc SDMMC2_R>;
>>>>> +                cap-sd-highspeed;
>>>>> +                cap-mmc-highspeed;
>>>>> +                max-frequency = <130000000>;
>>>>> +                feature-domains = <&etzpc 51>;
>>>>> +                status = "disabled";
>>>>> +            };
>>>>> +
>>>>> +            usbphyc: usbphyc@5a006000 {
>>>>> +                #address-cells = <1>;
>>>>> +                #size-cells = <0>;
>>>>> +                #clock-cells = <0>;
>>>>> +                compatible = "st,stm32mp1-usbphyc";
>>>>> +                reg = <0x5a006000 0x1000>;
>>>>> +                clocks = <&rcc USBPHY_K>;
>>>>> +                resets = <&rcc USBPHY_R>;
>>>>> +                vdda1v1-supply = <&reg11>;
>>>>> +                vdda1v8-supply = <&reg18>;
>>>>> +                feature-domains = <&etzpc 5>;
>>>>> +                status = "disabled";
>>>>> +
>>>>> +                usbphyc_port0: usb-phy@0 {
>>>>> +                    #phy-cells = <0>;
>>>>> +                    reg = <0>;
>>>>> +                };
>>>>> +
>>>>> +                usbphyc_port1: usb-phy@1 {
>>>>> +                    #phy-cells = <1>;
>>>>> +                    reg = <1>;
>>>>> +                };
>>>>> +            };
>>>>> +
>>>>> +        };
>>>>> +
>>>>>            /*
>>>>>             * Break node order to solve dependency probe issue between
>>>>>             * pinctrl and exti.
>>>>> diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
>>>>> index df451c3c2a26..be6061552683 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp133.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp133.dtsi
>>>>> @@ -33,35 +33,38 @@ m_can2: can@4400f000 {
>>>>>                bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
>>>>>                status = "disabled";
>>>>>            };
>>>>> +    };
>>>>> +};
>>>>>    -        adc_1: adc@48003000 {
>>>>> -            compatible = "st,stm32mp13-adc-core";
>>>>> -            reg = <0x48003000 0x400>;
>>>>> -            interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc ADC1>, <&rcc ADC1_K>;
>>>>> -            clock-names = "bus", "adc";
>>>>> -            interrupt-controller;
>>>>> -            #interrupt-cells = <1>;
>>>>> +&etzpc {
>>>>> +    adc_1: adc@48003000 {
>>>>> +        compatible = "st,stm32mp13-adc-core";
>>>>> +        reg = <0x48003000 0x400>;
>>>>> +        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +        clocks = <&rcc ADC1>, <&rcc ADC1_K>;
>>>>> +        clock-names = "bus", "adc";
>>>>> +        interrupt-controller;
>>>>> +        #interrupt-cells = <1>;
>>>>> +        #address-cells = <1>;
>>>>> +        #size-cells = <0>;
>>>>> +        feature-domains = <&etzpc 32>;
>>>>> +        status = "disabled";
>>>>> +
>>>>> +        adc1: adc@0 {
>>>>> +            compatible = "st,stm32mp13-adc";
>>>>> +            #io-channel-cells = <1>;
>>>>>                #address-cells = <1>;
>>>>>                #size-cells = <0>;
>>>>> +            reg = <0x0>;
>>>>> +            interrupt-parent = <&adc_1>;
>>>>> +            interrupts = <0>;
>>>>> +            dmas = <&dmamux1 9 0x400 0x80000001>;
>>>>> +            dma-names = "rx";
>>>>>                status = "disabled";
>>>>>    -            adc1: adc@0 {
>>>>> -                compatible = "st,stm32mp13-adc";
>>>>> -                #io-channel-cells = <1>;
>>>>> -                #address-cells = <1>;
>>>>> -                #size-cells = <0>;
>>>>> -                reg = <0x0>;
>>>>> -                interrupt-parent = <&adc_1>;
>>>>> -                interrupts = <0>;
>>>>> -                dmas = <&dmamux1 9 0x400 0x80000001>;
>>>>> -                dma-names = "rx";
>>>>> -                status = "disabled";
>>>>> -
>>>>> -                channel@18 {
>>>>> -                    reg = <18>;
>>>>> -                    label = "vrefint";
>>>>> -                };
>>>>> +            channel@18 {
>>>>> +                reg = <18>;
>>>>> +                label = "vrefint";
>>>>>                };
>>>>>            };
>>>>>        };
>>>>> diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
>>>>> index 4d00e7592882..a1a7a40c2a3e 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp13xc.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi
>>>>> @@ -4,15 +4,14 @@
>>>>>     * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
>>>>>     */
>>>>>    -/ {
>>>>> -    soc {
>>>>> -        cryp: crypto@54002000 {
>>>>> -            compatible = "st,stm32mp1-cryp";
>>>>> -            reg = <0x54002000 0x400>;
>>>>> -            interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc CRYP1>;
>>>>> -            resets = <&rcc CRYP1_R>;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> +&etzpc {
>>>>> +    cryp: crypto@54002000 {
>>>>> +        compatible = "st,stm32mp1-cryp";
>>>>> +        reg = <0x54002000 0x400>;
>>>>> +        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +        clocks = <&rcc CRYP1>;
>>>>> +        resets = <&rcc CRYP1_R>;
>>>>> +        feature-domains = <&etzpc 42>;
>>>>> +        status = "disabled";
>>>>>        };
>>>>>    };
>>>>> diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
>>>>> index 4d00e7592882..b9fb071a1471 100644
>>>>> --- a/arch/arm/boot/dts/stm32mp13xf.dtsi
>>>>> +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
>>>>> @@ -4,15 +4,13 @@
>>>>>     * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
>>>>>     */
>>>>>    -/ {
>>>>> -    soc {
>>>>> -        cryp: crypto@54002000 {
>>>>> -            compatible = "st,stm32mp1-cryp";
>>>>> -            reg = <0x54002000 0x400>;
>>>>> -            interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> -            clocks = <&rcc CRYP1>;
>>>>> -            resets = <&rcc CRYP1_R>;
>>>>> -            status = "disabled";
>>>>> -        };
>>>>> +&etzpc {
>>>>> +    cryp: crypto@54002000 {
>>>>> +        compatible = "st,stm32mp1-cryp";
>>>>> +        reg = <0x54002000 0x400>;
>>>>> +        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +        clocks = <&rcc CRYP1>;
>>>>> +        resets = <&rcc CRYP1_R>;
>>>>> +        status = "disabled";
>>>>>        };
>>>>>    };
>>>>
>>>
>>
>> Regarding the patch itself, I can separate it in two patches.
>> 1)Introduce ETZPC
>> 2)Move peripherals under ETZPC
>>
>> Best regards,
>> Gatien
>>
>