Re: [PATCH v2 5/5] fbdev/simplefb: Add support for interconnect paths

[Thomas Zimmermann <tzimmermann@suse.de>]

Hi

Am 27.06.25 um 09:56 schrieb Javier Martinez Canillas:
> Luca Weiss <luca.weiss@fairphone.com> writes:
>
>> Some devices might require keeping an interconnect path alive so that
>> the framebuffer continues working. Add support for that by setting the
>> bandwidth requirements appropriately for all provided interconnect
>> paths.
>>
>> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>>   drivers/video/fbdev/simplefb.c | 83 ++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 83 insertions(+)
>>
> [...]
>
>> +static void simplefb_detach_icc(void *res)
>> +{
>> +	struct simplefb_par *par = res;
>> +	int i;
>> +
>> +	for (i = par->icc_count - 1; i >= 0; i--) {
>> +		if (!IS_ERR_OR_NULL(par->icc_paths[i]))
>> +			icc_put(par->icc_paths[i]);
>> +	}
>> +}
>> +
>> +static int simplefb_attach_icc(struct simplefb_par *par,
>> +			       struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	int ret, count, i;
>> +
>> +	count = of_count_phandle_with_args(dev->of_node, "interconnects",
>> +							 "#interconnect-cells");
>> +	if (count < 0)
>> +		return 0;
>> +
>> +	/* An interconnect path consists of two elements */
>> +	if (count % 2) {
>> +		dev_err(dev, "invalid interconnects value\n");
>> +		return -EINVAL;
>> +	}
>> +	par->icc_count = count / 2;
>> +
>> +	par->icc_paths = devm_kcalloc(dev, par->icc_count,
>> +				      sizeof(*par->icc_paths),
>> +				      GFP_KERNEL);
>> +	if (!par->icc_paths)
>> +		return -ENOMEM;
>> +
>> +	for (i = 0; i < par->icc_count; i++) {
>> +		par->icc_paths[i] = of_icc_get_by_index(dev, i);
>> +		if (IS_ERR_OR_NULL(par->icc_paths[i])) {
>> +			ret = PTR_ERR(par->icc_paths[i]);
>> +			if (ret == -EPROBE_DEFER)
>> +				goto err;
>> +			dev_err(dev, "failed to get interconnect path %u: %d\n", i, ret);
>> +			continue;
>> +		}
>> +
>> +		ret = icc_set_bw(par->icc_paths[i], 0, UINT_MAX);
>> +		if (ret) {
>> +			dev_err(dev, "failed to set interconnect bandwidth %u: %d\n", i, ret);
>> +			continue;
>> +		}
>> +	}
>> +
>> +	return devm_add_action_or_reset(dev, simplefb_detach_icc, par);
>> +
>> +err:
>> +	while (i) {
>> +		--i;
>> +		if (!IS_ERR_OR_NULL(par->icc_paths[i]))
>> +			icc_put(par->icc_paths[i]);
>> +	}
>> +	return ret;
>> +}
>> +#else
> These two functions contain the same logic that you are using in the
> simpledrm driver. I wonder if could be made helpers so that the code
> isn't duplicated in both drivers.

No please not!. Any work should rather be directed towards deleting 
simplefb entirely.

Best regards
Thomas

>
> But in any case it could be a follow-up of your series I think.
>
> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
>

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)