Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property

["Kryštof Černý" <cleverline1mc@gmail.com>]

Hello,

> On 20/11/2024 09:34, Kryštof Černý wrote:
>> Hello,
>>
>>> On Fri, Nov 15, 2024 at 03:58:06PM +0100, Kryštof Černý via B4 Relay wrote:
>>>> From: Kryštof Černý <cleverline1mc@gmail.com>
>>>>
>>>> Adds the newly added vcc-supply property to bindings.
>>>
>>> This commit message is a circular argument. You're adding it to the
>>> binding, which of course means it is newly added.
>>
>> You are right, I will replace with "Adds the vcc-supply property to
>> bindings." in the next version.
> 
> No, please say why, e.g. because it was missing and device has it
> according to datasheet.

Right, what about:

Adds the optional vcc-supply property to bindings, informs if the device 
needs a regulator to be turned on for its operation.


>>
>>>>
>>>> Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
>>>> ---
>>>>    Documentation/devicetree/bindings/w1/maxim,ds2482.yaml | 3 +++
>>>>    1 file changed, 3 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
>>>> index 422becc6e1fa8d58665c5586ebdc611cd0b2c760..a6b9e0658ec858cb24b21cf64443a061bb43e4ef 100644
>>>> --- a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
>>>> +++ b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
>>>> @@ -25,6 +25,9 @@ properties:
>>>>      reg:
>>>>        maxItems: 1
>>>>    
>>>> +  vcc-supply:
>>>> +    description: phandle of the regulator that provides the supply voltage.
>>>
>>> "vcc-supply: true" should suffice.
>>>
>>
>> Right, I suppose you mean to remove the description and just have
>> "vcc-supply: true".
>> If so, could you explain why no description? Is it some standard property
>> or because the name is self-explanatory? If you mean to keep both,
>> please reply.
> 
> It's almost self-explanatory and your description does not give any more
> information. git grep for existing code - you will find also examples
> which give actual information, e.g. detailed PIN name and accepted voltages.
> 

Thanks for the tip, best description I have come up with:

   vcc-supply:
     description:
       Regulator that drives the VCC pin (2.9-5.5 V). Depending on the 
hardware
       design, it may set the vcc voltage of 3 wire 1-Wire bus variant.

Would be glad for feedback if you think it's a good idea to use it, or
just keep "vcc-supply: true".

> 
> Best regards,
> Krzysztof

Thank you,
Kryštof Černý