Re: [PATCH 1/3] dt-bindings: crypto: Convert Atmel AES to yaml

[Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>]

On 07/02/2022 04:24, Tudor Ambarus wrote:
> Convert Atmel AES documentation to yaml format. With the conversion the
> clock and clock-names properties are made mandatory. The driver returns
> -EINVAL if "aes_clk" is not found, reflect that in the bindings and make
> the clock and clock-names properties mandatory. Update the example to
> better describe how one should define the dt node.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  .../devicetree/bindings/crypto/atmel,aes.yaml | 65 +++++++++++++++++++
>  .../bindings/crypto/atmel-crypto.txt          | 20 ------
>  2 files changed, 65 insertions(+), 20 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/crypto/atmel,aes.yaml
> 
> diff --git a/Documentation/devicetree/bindings/crypto/atmel,aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,aes.yaml
> new file mode 100644
> index 000000000000..f77ec04dbabe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/atmel,aes.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/crypto/atmel,aes.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator
> +
> +maintainers:
> +  - Tudor Ambarus <tudor.ambarus@microchip.com>
> +
> +properties:
> +  compatible:
> +    const: atmel,at91sam9g46-aes
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: aes_clk
> +
> +  dmas:
> +    items:
> +      - description: TX DMA Channel
> +      - description: RX DMA Channel
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - dmas
> +  - dma-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/at91.h>
> +    #include <dt-bindings/dma/at91.h>

One empty line for readability.

> +    aes: aes@f8038000 {

Generic node name, so "crypto".

> +      compatible = "atmel,at91sam9g46-aes";
> +      reg = <0xe1810000 0x100>;
> +      interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> +      clock-names = "aes_clk";
> +      dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
> +             <&dma0 AT91_XDMAC_DT_PERID(2)>;
> +      dma-names = "tx", "rx";
> +      status= "okay";
> +    };

Drop the status property.

Best regards,
Krzysztof