Re: [PATCH 0/3] Add support for Ariaboard Photonicat RK3568

[Junhao Xie <bigfoot@classfun.cn>]

On 2024/9/4 21:36, Rob Herring (Arm) wrote> On Wed, 04 Sep 2024 19:14:53 +0800, Junhao Xie wrote:
>> Add dts for Ariaboard Photonicat RK3568.
>>
[...]
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y rockchip/rk3568-ariaboard-photonicat.dtb' for 20240904111456.87089-1-bigfoot@classfun.cn:
> 
> arch/arm64/boot/dts/rockchip/rk3568-ariaboard-photonicat.dtb: phy@fe8c0000: 'phy-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#

I will remove it in PATCH v2

> arch/arm64/boot/dts/rockchip/rk3568-ariaboard-photonicat.dtb: rfkill-modem: 'reset-gpios' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/net/rfkill-gpio.yaml#

The modem in Photonicat must have a reset signal to work properly.
I can find reset-gpios in net/rfkill/rfkill-gpio.c, but it is not in the schema.
Maybe reset-gpios is missing in rfkill-gpio.yaml? or this property cannot be used in dts?

> 

Thanks for your reply, I will fix them in PATCH v2.

Best regards,
Junhao