Re: [PATCH v2 01/14] dt-bindings: regulator: Add ROHM BD96802 PMIC

[Matti Vaittinen <mazziesaccount@gmail.com>]

Hi Conor,

Thanks for taking a look at this :)

On 25/03/2025 19:23, Conor Dooley wrote:
> On Mon, Mar 24, 2025 at 10:54:44AM +0200, Matti Vaittinen wrote:
>> BD96802Qxx-C is an automotive grade configurable Power Management
>> Integrated Circuit supporting Functional Safety features for application
>> processors, SoCs and FPGAs. BD96802 is controlled via I2C, provides two
>> interrupt lines and has two controllable buck regulators.
>>
>> The BD96802 belongs to the family of ROHM Scalable PMICs and is intended
>> to be used as a companion PMIC for the BD96801.
>>
>> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
>>
>> ---
>> Revision history:
>>   v1 => :
>>    - No changes
>> ---
>>   .../regulator/rohm,bd96802-regulator.yaml     | 44 +++++++++++++++++++
>>   1 file changed, 44 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96802-regulator.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd96802-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd96802-regulator.yaml
>> new file mode 100644
>> index 000000000000..671eaf1096d3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/regulator/rohm,bd96802-regulator.yaml
>> @@ -0,0 +1,44 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/regulator/rohm,bd96802-regulator.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: ROHM BD96802 Power Management Integrated Circuit regulators
>> +
>> +maintainers:
>> +  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
>> +
>> +description:
>> +  This module is part of the ROHM BD96802 MFD device. For more details
>> +  see Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml.
>> +
>> +  The regulator controller is represented as a sub-node of the PMIC node
>> +  on the device tree.
>> +
>> +  Regulator nodes should be named to buck1 and buck2.
> 
> Is it really needed to add a new binding for this, rather than including
> it in the mfd binding,

A valid question. I did this because that's what I've used with all the 
other PMIC's regulator bindings. All of these have MFD counterpart:

rohm,bd71815-regulator.yaml
rohm,bd71828-regulator.yaml
rohm,bd71837-regulator.yaml
rohm,bd71847-regulator.yaml
rohm,bd9576-regulator.yaml
rohm,bd96801-regulator.yaml

Basically, none of the MFD bindings I've written for ROHM PMICs contain 
the regulator descriptions.

The thing is that users might be used to look for the regulator bindings 
from the regulator folder. I'd like to keep this consistent, especially 
with the BD96801 because the BD96802 is intended to be used together 
with it. (BD96802 is used as a companion PMIC for the BD96801 to extend 
it's capabilities).

> particularly when this isn't actually a binding
> for the regulator but the pattern section applies to the mfd.

Hmmm? I am not sure I understand what you mean here. I know I am really 
bad with the YAML and bindings, but if I read correctly what I've copied 
- the pattern section describes what is inside the 'regulators' node. I 
think this is similar to what we have with the rest of the ROHM PMIC 
bindings. Should they all be somehow modified?

Yours,
	-- Matti