Re: [PATCH 10/49] ath11k: add debug.c

[Anilkumar Kolli <akolli-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>]

On 2019-08-27 15:23, Sven Eckelmann wrote:
> On Tuesday, 27 August 2019 11:04:23 CEST Anilkumar Kolli wrote:
> [...]
>> > Yes, but it shouldn't kill the complete system.
>> >
>> This will not kill the whole system, This will crash target and we 
>> have
>> mechanism to recover the system.
>> 
>> Hope u have generated the crash with below patch,
>> https://source.codeaurora.org/quic/qsdk/oss/system/feeds/wlan-open/tree/mac80211/patches/019-ath11k-disable-q6-recovery-to-crash-kernel.patch?h=win_ap.1.0
>> 
>> Please remove this patch to see the target recover after the crash.
> 
> John also pointed me to this patch yesterday and I have now removed it.
> 
> But the wifi hardware doesn't recover after issuing an assert. All(?) 
> firmware
> request will just timeout:
> 
>     [ 1093.114530] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1093.114555] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1093.118903] ath11k c000000.wifi1: Failed to set dtim period for
> VDEV 0: -11
>     [ 1096.124532] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1096.124554] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1096.128902] ath11k c000000.wifi1: Failed to set CTS prot for 
> VDEV: 0
>     [ 1099.134527] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1099.134547] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1099.138895] ath11k c000000.wifi1: Failed to set preamble for 
> VDEV: 0
>     [ 1102.144526] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1102.144546] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1102.148894] ath11k c000000.wifi1: failed to set mgmt tx rate -11
>     [ 1105.154526] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1105.154547] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1105.158895] ath11k c000000.wifi1: failed to set beacon tx rate 
> -11
>     [ 1114.164529] ath11k c000000.wifi1: wmi command 16387 timeout
>     [ 1114.164553] ath11k c000000.wifi1: failed to send 
> WMI_PDEV_SET_PARAM cmd
>     [ 1114.168899] ath11k c000000.wifi1: Failed to set beacon mode for 
> VDEV: 0
>     [ 1117.174527] ath11k c000000.wifi1: wmi command 28675 timeout
>     [ 1117.174550] ath11k c000000.wifi1: failed to send 
> WMI_BCN_TMPL_CMDID
>     [ 1117.178899] ath11k c000000.wifi1: failed to submit beacon
> template command: -11
>     [ 1117.185231] ath11k c000000.wifi1: failed to update bcn template: 
> -11
>     [ 1120.184524] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1120.184545] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1120.188893] ath11k c000000.wifi1: Failed to set dtim period for
> VDEV 0: -11
>     [ 1123.194527] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1123.194548] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1123.198895] ath11k c000000.wifi1: Failed to set CTS prot for 
> VDEV: 0
>     [ 1126.204526] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1126.204547] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1126.208894] ath11k c000000.wifi1: Failed to set preamble for 
> VDEV: 0
>     [ 1129.214527] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1129.214548] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1129.218897] ath11k c000000.wifi1: failed to set mgmt tx rate -11
>     [ 1132.224525] ath11k c000000.wifi1: wmi command 20488 timeout
>     [ 1132.224546] ath11k c000000.wifi1: failed to send 
> WMI_VDEV_SET_PARAM_CMDID
>     [ 1132.228894] ath11k c000000.wifi1: failed to set beacon tx rate 
> -11
> 
> ath11k must be unloaded + loaded again to fix this problem.
> 

Could you plz try removing below patch?
https://source.codeaurora.org/quic/qsdk/oss/system/feeds/wlan-open/tree/mac80211/patches/072-ath11k-print-stats-on-crash.patch?h=win_ap.1.0

-- 
Thanks
Anil.