Devicetree
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely@secretlab.ca>
To: Wolfgang Grandegger <wg@grandegger.com>
Cc: linuxppc-dev <Linuxppc-dev@ozlabs.org>,
	devicetree-discuss <devicetree-discuss@ozlabs.org>,
	linux-i2c@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>
Subject: Re: [PATCH v2] powerpc: i2c-mpc: make I2C bus speed configurable
Date: Wed, 1 Apr 2009 07:47:21 -0600	[thread overview]
Message-ID: <fa686aa40904010647o57b59845p54a9c1e1535e4453@mail.gmail.com> (raw)
In-Reply-To: <fa686aa40904010644t1c111c05ka7349869eb155429@mail.gmail.com>

On Wed, Apr 1, 2009 at 7:44 AM, Grant Likely <grant.likely@secretlab.ca> wrote:
> On Wed, Apr 1, 2009 at 7:13 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>> This patch makes the I2C bus speed configurable by using the I2C node
>> property "clock-frequency". If the property is not defined, the old
>> fixed clock settings will be used for backward compatibility.
>
> I mostly like this patch.  However, as I mentioned in my other reply,
> I'm going to NAK it because the divisor tables are not common code and
> do not belong in common code files.
>
> Other than that, I like this version of the patch and I think it is
> almost finished.  More comments below.

Oh, and you should look in MAINTAINERS and cc this patch to Ben Dooks
and the linux-i2c@vger.kernel.org mailing list.

g.

>
>> -static void mpc_i2c_setclock(struct mpc_i2c *i2c)
>> -{
>> -       /* Set clock and filters */
>> -       if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) {
>> -               writeb(0x31, i2c->base + MPC_I2C_FDR);
>> -               writeb(0x10, i2c->base + MPC_I2C_DFSRR);
>> -       } else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200)
>> -               writeb(0x3f, i2c->base + MPC_I2C_FDR);
>> -       else
>> -               writel(0x1031, i2c->base + MPC_I2C_FDR);
>> +static void mpc_i2c_setclock_52xx(struct device_node *node,
>> +                                 struct mpc_i2c *i2c,
>> +                                 u32 clock, u32 prescaler)
>> +{
>> +       int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
>> +
>> +       if (fdr < 0)
>> +               fdr = 0x3f; /* backward compatibility */
>> +       writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
>> +       dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
>> +}
>> +
>> +static void mpc_i2c_setclock_8xxx(struct device_node *node,
>> +                                 struct mpc_i2c *i2c,
>> +                                 u32 clock, u32 prescaler)
>> +{
>> +       int fdr = fsl_i2c_get_fdr(node, clock, prescaler);
>> +
>> +       if (fdr < 0)
>> +               fdr = 0x1031; /* backward compatibility */
>> +       writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
>> +       writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
>> +       dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
>> +                clock, fdr >> 8, fdr & 0xff);
>>  }
>
> Very neat and tidy indeed.  I like this.
>
>> Index: linux-2.6/arch/powerpc/sysdev/fsl_soc.c
>> ===================================================================
>> --- linux-2.6.orig/arch/powerpc/sysdev/fsl_soc.c        2009-03-31 21:27:52.000000000 +0200
>> +++ linux-2.6/arch/powerpc/sysdev/fsl_soc.c     2009-04-01 12:09:18.796719327 +0200
>> @@ -39,7 +39,7 @@
>>  #include <sysdev/fsl_soc.h>
>>  #include <mm/mmu_decl.h>
>>  #include <asm/cpm2.h>
>> -
>> +#define DEBUG
>  ^^^^^^^^^^^^^^^^^^^^^^^  oops?
>
> g.
>
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

  reply	other threads:[~2009-04-01 13:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-01 13:13 [PATCH v2] powerpc: i2c-mpc: make I2C bus speed configurable Wolfgang Grandegger
2009-04-01 13:44 ` Grant Likely
2009-04-01 13:47   ` Grant Likely [this message]
     [not found]     ` <fa686aa40904010647o57b59845p54a9c1e1535e4453-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-04-01 15:51       ` Wolfgang Grandegger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fa686aa40904010647o57b59845p54a9c1e1535e4453@mail.gmail.com \
    --to=grant.likely@secretlab.ca \
    --cc=Linuxppc-dev@ozlabs.org \
    --cc=ben-linux@fluff.org \
    --cc=devicetree-discuss@ozlabs.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox