From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grant Likely Subject: Re: [Patch v2 2/2] 5200/mpc: improve i2c bus error recovery Date: Wed, 17 Feb 2010 13:10:46 -0700 Message-ID: References: <1266433158.2322.1@antares> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <1266433158.2322.1@antares> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linuxppc-dev-bounces+glppe-linuxppc-embedded-2=m.gmane.org@lists.ozlabs.org Errors-To: linuxppc-dev-bounces+glppe-linuxppc-embedded-2=m.gmane.org@lists.ozlabs.org To: =?ISO-8859-1?Q?Albrecht_Dre=DF?= Cc: Linux PPC Development , Devicetree Discussions , "Ben Dooks (embedded platforms)" , "Ira W. Snyder" List-Id: devicetree@vger.kernel.org On Wed, Feb 17, 2010 at 11:59 AM, Albrecht Dre=DF = wrote: > Make the I2C adapter timeout configurable through a Device Tree property > which gives the timeout in microseconds. > > Change vs. v.1: use "fsl,timeout" as property name (Thanks, Grant) > > Signed-off-by: Albrecht Dre=DF Acked-by: Grant Likely > > --- > > --- linux-2.6.32-orig/Documentation/powerpc/dts-bindings/fsl/i2c.txt > =A02009-12-03 04:51:21.000000000 +0100 > +++ linux-2.6.32/Documentation/powerpc/dts-bindings/fsl/i2c.txt 2010-02-17 > 14:18:01.000000000 +0100 > @@ -21,6 +21,7 @@ Recommended properties : > =A0- fsl,preserve-clocking : boolean; if defined, the clock settings > =A0 =A0from the bootloader are preserved (not touched). > =A0- clock-frequency : desired I2C bus clock frequency in Hz. > + - fsl,timeout : I2C bus timeout in microseconds. > > =A0Examples : > > @@ -44,5 +45,6 @@ Examples : > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupts =3D <43 2>; > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-parent =3D <&mpic>; > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0clock-frequency =3D <400000>; > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 fsl,timeout =3D <10000>; > =A0 =A0 =A0 =A0}; > > -- = Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.