Re: [PATCH V2 3/4] arm64: dts: qcom: ipq9574: Drop bias_pll_ubi_nc_clk & update intc node

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 17.04.2023 07:33, Devi Priya wrote:
> Drop the unused backup source bias_pll_ubi_nc_clk.
> Also, update the size of GICC and GICV region to 8kB and add target CPU
> encoding.
These things have too big and too distant consequences to go in
a single patch and the GIC fix should have a fixes tag.

> 
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 13 +++----------
>  1 file changed, 3 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 3bb7435f5e7f..f1f959b43180 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -16,12 +16,6 @@
>  	#size-cells = <2>;
>  
>  	clocks {
> -		bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
> -			compatible = "fixed-clock";
> -			clock-frequency = <353000000>;
> -			#clock-cells = <0>;
> -		};
> -
>  		sleep_clk: sleep-clk {
>  			compatible = "fixed-clock";
>  			#clock-cells = <0>;
> @@ -131,7 +125,6 @@
>  			reg = <0x01800000 0x80000>;
>  			clocks = <&xo_board_clk>,
>  				 <&sleep_clk>,
> -				 <&bias_pll_ubi_nc_clk>,
NAK, this is an ABI break. If you want to drop it, you'd need
to leave a <0> here.

Konrad
>  				 <0>,
>  				 <0>,
>  				 <0>,
> @@ -172,14 +165,14 @@
>  		intc: interrupt-controller@b000000 {
>  			compatible = "qcom,msm-qgic2";
>  			reg = <0x0b000000 0x1000>,  /* GICD */
> -			      <0x0b002000 0x1000>,  /* GICC */
> +			      <0x0b002000 0x2000>,  /* GICC */
>  			      <0x0b001000 0x1000>,  /* GICH */
> -			      <0x0b004000 0x1000>;  /* GICV */
> +			      <0x0b004000 0x2000>;  /* GICV */
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			interrupt-controller;
>  			#interrupt-cells = <3>;
> -			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>  			ranges = <0 0x0b00c000 0x3000>;
>  
>  			v2m0: v2m@0 {