Re: [PATCH 07/10] dt-bindings: PCI: qcom: Add IPQ5332 SoC

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 14/12/2023 07:28, Praveenkumar I wrote:
> Add support for the PCIe controller on the Qualcomm
> IPQ5332 SoC to the bindings.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> ---
>  .../devicetree/bindings/pci/qcom,pcie.yaml    | 36 +++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> index eadba38171e1..af5e67d2a984 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -21,6 +21,7 @@ properties:
>            - qcom,pcie-apq8064
>            - qcom,pcie-apq8084
>            - qcom,pcie-ipq4019
> +          - qcom,pcie-ipq5332
>            - qcom,pcie-ipq6018
>            - qcom,pcie-ipq8064
>            - qcom,pcie-ipq8064-v2
> @@ -170,6 +171,7 @@ allOf:
>          compatible:
>            contains:
>              enum:
> +              - qcom,pcie-ipq5332
>                - qcom,pcie-ipq6018
>                - qcom,pcie-ipq8074-gen3
>      then:
> @@ -332,6 +334,39 @@ allOf:
>              - const: ahb # AHB reset
>              - const: phy_ahb # PHY AHB reset
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,pcie-ipq5332
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 6
> +          maxItems: 6
> +        clock-names:
> +          items:
> +            - const: ahb # AHB clock
> +            - const: aux # Auxiliary clock
> +            - const: axi_m # AXI Master clock
> +            - const: axi_s # AXI Slave clock
> +            - const: axi_bridge # AXI bridge clock
> +            - const: rchng
> +        resets:
> +          minItems: 8
> +          maxItems: 8
> +        reset-names:
> +          items:
> +            - const: pipe # PIPE reset

No sleep reset? Otherwise it looks like some existing entry, so you
should use the same order of resets.



Best regards,
Krzysztof