Re: [PATCH 4/7] dt-bindings: drm/bridge: anx7625: Add mode-switch support

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 07/06/2022 21:00, Prashant Malani wrote:
> Analogix 7625 can be used in systems to switch USB Type-C DisplayPort
> alternate mode lane traffic between 2 Type-C ports.
> 
> Update the binding to accommodate this usage by introducing a switch
> property.
> 
> Signed-off-by: Prashant Malani <pmalani@chromium.org>
> ---
>  .../display/bridge/analogix,anx7625.yaml      | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 35a48515836e..7e1f655ddfcc 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -105,6 +105,26 @@ properties:
>        - port@0
>        - port@1
>  
> +  switches:
> +    type: object
> +    description: Set of switches controlling DisplayPort traffic on
> +      outgoing RX/TX lanes to Type C ports.
> +
> +    properties:
> +      switch:

You allow only one switch with such schema, so no need for "switches"...

> +        $ref: /schemas/usb/typec-switch.yaml#
> +        maxItems: 2

Are you sure this works? what are you limiting here with maxItems? I
think you wanted patternProperties...

> +
> +        properties:
> +          reg:
> +            maxItems: 1
> +
> +        required:
> +          - reg
> +
> +    required:
> +      - switch@0

This does not match the property.

You also need unevaluatedProperties:false


> +
>  required:
>    - compatible
>    - reg
> @@ -167,5 +187,41 @@ examples:
>                      };
>                  };
>              };
> +            switches {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                switch@0 {
> +                    compatible = "typec-switch";
> +                    reg = <0>;
> +                    mode-switch;
> +
> +                    ports {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                        port@0 {
> +                            reg = <0>;
> +                            anx_typec0: endpoint {
> +                              remote-endpoint = <&typec_port0>;

Messed up indentation. Your previous patch should also switch to 4-space
as recommended by schema coding style.

> +                            };
> +                        };
> +                    };
> +                };
> +                switch@1 {
> +                    compatible = "typec-switch";
> +                    reg = <1>;
> +                    mode-switch;
> +
> +                    ports {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                        port@0 {
> +                            reg = <0>;
> +                            anx_typec1: endpoint {
> +                              remote-endpoint = <&typec_port1>;

Ditto.

> +                            };
> +                        };
> +                    };
> +                };
> +            };
>          };
>      };


Best regards,
Krzysztof