Re: [PATCH v4 8/8] dt-bindings: Add rt5033 mfd, regulator and charger

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 06/05/2023 17:54, Jakob Hauser wrote:
> Add device tree binding documentation for rt5033 multifunction device, voltage
> regulator and battery charger.
> 
> Cc: Beomho Seo <beomho.seo@samsung.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> The patch is based on next-20230505.
> 
> The drivers for rt5033 (mfd) and rt5033-regulator are existing. Whereas the
> the driver rt5033-charger is new in this patchset.
> 
>  .../bindings/mfd/richtek,rt5033.yaml          | 113 ++++++++++++++++++
>  .../power/supply/richtek,rt5033-charger.yaml  |  64 ++++++++++
>  2 files changed, 177 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
>  create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
> new file mode 100644
> index 000000000000..0aa0a556b50f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Richtek RT5033 Power Management Integrated Circuit
> +
> +maintainers:
> +  - Jakob Hauser <jahau@rocketmail.com>
> +
> +description:
> +  RT5033 is a multifunction device which includes battery charger, fuel gauge,
> +  flash LED current source, LDO and synchronous Buck converter for portable
> +  applications. It is interfaced to host controller using I2C interface. The
> +  battery fuel gauge uses a separate I2C bus.
> +
> +properties:
> +  compatible:
> +    const: richtek,rt5033
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  regulators:
> +    description:
> +      The regulators of RT5033 have to be instantiated under a sub-node named
> +      "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO
> +      voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges
> +      from 1.0 V to 3.0 V in 0.1 V steps.
> +    type: object
> +    patternProperties:
> +      "^(SAFE_LDO|LDO|BUCK)$":
> +        type: object
> +        $ref: /schemas/regulator/regulator.yaml#
> +        unevaluatedProperties: false
> +    additionalProperties: false
> +
> +  charger:
> +    type: object
> +    $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    battery: battery {
> +        compatible = "simple-battery";
> +        precharge-current-microamp = <450000>;
> +        constant-charge-current-max-microamp = <1000000>;
> +        charge-term-current-microamp = <150000>;
> +        precharge-upper-limit-microvolt = <3500000>;
> +        constant-charge-voltage-max-microvolt = <4350000>;
> +    };
> +
> +    extcon {
> +        usb_con: connector {
> +            compatible = "usb-b-connector";
> +            label = "micro-USB";
> +            type = "micro";
> +        };
> +    };
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pmic@34 {
> +            compatible = "richtek,rt5033";
> +            reg = <0x34>;
> +
> +            interrupt-parent = <&msmgpio>;
> +            interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
> +
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&pmic_int_default>;
> +
> +            regulators {
> +                safe_ldo_reg: SAFE_LDO {
> +                    regulator-name = "SAFE_LDO";
> +                    regulator-min-microvolt = <4900000>;
> +                    regulator-max-microvolt = <4900000>;
> +                    regulator-always-on;
> +                };
> +                ldo_reg: LDO {
> +                    regulator-name = "LDO";
> +                    regulator-min-microvolt = <2800000>;
> +                    regulator-max-microvolt = <2800000>;
> +                };
> +                buck_reg: BUCK {
> +                    regulator-name = "BUCK";
> +                    regulator-min-microvolt = <1200000>;
> +                    regulator-max-microvolt = <1200000>;
> +                };
> +            };
> +
> +            charger {
> +                compatible = "richtek,rt5033-charger";
> +                monitored-battery = <&battery>;
> +                connector = <&usb_con>;
> +            };
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
> new file mode 100644
> index 000000000000..b8607cc6ec63
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Richtek RT5033 PIMC Battery Charger

PMIC

> +
> +maintainers:
> +  - Jakob Hauser <jahau@rocketmail.com>
> +
> +description:
> +  The battery charger of the multifunction device RT5033 has to be instantiated
> +  under sub-node named "charger" using the following format.
> +
> +properties:
> +  compatible:
> +    const: richtek,rt5033-charger
> +
> +  monitored-battery:
> +    description: |
> +      Phandle to the monitored battery according to battery.yaml. The battery
> +      node needs to contain five parameters.
> +
> +      precharge-current-microamp:
> +      Current of pre-charge mode. The pre-charge current levels are 350 mA
> +      to 650 mA programmed by I2C per 100 mA.
> +
> +      constant-charge-current-max-microamp:
> +      Current of fast-charge mode. The fast-charge current levels are 700 mA
> +      to 2000 mA programmed by I2C per 100 mA.
> +
> +      charge-term-current-microamp:
> +      This property is end of charge current. Its level ranges from 150 mA
> +      to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
> +      600 mA in 100 mA steps.
> +
> +      precharge-upper-limit-microvolt:
> +      Voltage of pre-charge mode. If the battery voltage is below the pre-charge
> +      threshold voltage, the charger is in pre-charge mode with pre-charge
> +      current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
> +
> +      constant-charge-voltage-max-microvolt:
> +      Battery regulation voltage of constant voltage mode. This voltage levels
> +      from 3.65 V to 4.4 V by I2C per 0.025 V.
> +
> +  connector:
> +    description:
> +      Phandle to a USB connector according to usb-connector.yaml. The connector
> +      should be a child of the extcon device.
> +    maxItems: 1

Missing type/ref... but then you will notice you have conflicting ref
with existing connector. connector is usb-connector.yaml, not phandle. I
am not sure if we need generic property, so let's go with device
specific - richtek,usb-connector


> +
> +required:
> +  - monitored-battery
Best regards,
Krzysztof