Re: [PATCH v10 2/4] Documentation/dt: Add descriptions for loongson display controller

[Krzysztof Kozlowski <krzk@kernel.org>]

On 20/02/2022 19:22, Jiaxun Yang wrote:
> 
> 
> 在 2022/2/20 14:55, Sui Jingfeng 写道:
>> From: suijingfeng <suijingfeng@loongson.cn>
>>
>> Add DT documentation for loongson display controller found in LS2K1000,
>> LS2K0500 and LS7A1000.
>>
>> v2: DT binding docs and includes should be a separate patch,
>>      fix a warnning because of that.
>>
>> v3: split dt-bindings from other changes into a separate patch.
>>
>> v4: fix warnings and errors when running make dt_binding_check
>>
>> Reported-by: Rob Herring <robh@kernel.org>
>> Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Signed-off-by: suijingfeng <suijingfeng@loongson.cn>
>> Signed-off-by: Sui Jingfeng <15330273260@189.cn>
>> ---
>>   .../loongson/loongson,display-controller.yaml | 122 ++++++++++++++++++
>>   1 file changed, 122 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>> new file mode 100644
>> index 000000000000..ee1a59b91943
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>> @@ -0,0 +1,122 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Loongson LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings
>> +
>> +maintainers:
>> +  - Sui Jingfeng <suijingfeng@loongson.cn>
>> +
>> +description: |+
>> +
>> +  Loongson display controllers are simple which require scanout buffers
>> +  to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system
>> +  memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped
>> +  with a dedicated video ram which is 64MB or more.
>> +
>> +  For LS7A1000, there are 4 dedicated GPIOs whose control register is
>> +  located at the DC register space. They are used to emulate two way i2c,
>> +  One for DVO0, another for DVO1.
>> +
>> +  LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either
>> +  general purpose GPIO emulated i2c or hardware i2c in the SoC.
>> +
>> +  LSDC has two display pipes, each way has a DVO interface which provide
>> +  RGB888 signals, vertical & horizontal synchronisations, data enable and
>> +  the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from
>> +  1920x1080 resolution at 60Hz. Each CRTC has two FB address registers.
>> +
>> +  LSDC's display pipeline have several components as below description,
>> +
>> +  The display controller in LS7A1000:
>> +    ___________________                                     _________
>> +    |            -------|                                   |         |
>> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
>> +    |  _   _     -------|        ^             ^            |_________|
>> +    | | | | |    -------|        |             |
>> +    | |_| |_|    | i2c0 <--------+-------------+
>> +    |            -------|
>> +    |   DC IN LS7A1000  |
>> +    |  _   _     -------|
>> +    | | | | |    | i2c1 <--------+-------------+
>> +    | |_| |_|    -------|        |             |             _________
>> +    |            -------|        |             |            |         |
>> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
>> +    |            -------|                                   |_________|
>> +    |___________________|
>> +
>> +  Simple usage of LS7A1000 with LS3A4000 CPU:
>> +
>> +    +------+            +-----------------------------------+
>> +    | DDR4 |            |  +-------------------+            |
>> +    +------+            |  | PCIe Root complex |   LS7A1000 |
>> +       || MC0           |  +--++---------++----+            |
>> +  +----------+  HT 3.0  |     ||         ||                 |
>> +  | LS3A4000 |<-------->| +---++---+  +--++--+    +---------+   +------+
>> +  |   CPU    |<-------->| | GC1000 |  | LSDC |<-->| DDR3 MC |<->| VRAM |
>> +  +----------+          | +--------+  +-+--+-+    +---------+   +------+
>> +       || MC1           +---------------|--|----------------+
>> +    +------+                            |  |
>> +    | DDR4 |          +-------+   DVO0  |  |  DVO1   +------+
>> +    +------+   VGA <--|ADV7125|<--------+  +-------->|TFP410|--> DVI/HDMI
>> +                      +-------+                      +------+
>> +
>> +  The display controller in LS2K1000/LS2K0500:
>> +     ___________________                                     _________
>> +    |            -------|                                   |         |
>> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
>> +    |  _   _     -------|        ^              ^           |_________|
>> +    | | | | |           |        |              |
>> +    | |_| |_|           |     +------+          |
>> +    |                   <---->| i2c0 |<---------+
>> +    |   DC IN LS2K1000  |     +------+
>> +    |  _   _            |     +------+
>> +    | | | | |           <---->| i2c1 |----------+
>> +    | |_| |_|           |     +------+          |            _________
>> +    |            -------|        |              |           |         |
>> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
>> +    |            -------|                                   |_________|
>> +    |___________________|
>> +
>> +properties:
>> +  $nodename:
>> +    pattern: "^display-controller@[0-9a-f],[0-9a-f]$"
>> +
>> +  compatible:
>> +    enum:
>> +      - loongson,ls7a1000-dc
>> +      - loongson,ls2k1000-dc
>> +      - loongson,ls2k0500-dc
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +
>> +additionalProperties: false
> Given that it is possible to have output subnodes I guess 
> additionalProperties
> should be allowed?

subnodes should be instead listed. Either with strict name (if these are
e.g. ports) or with some more or less relaxed pattern.


Best regards,
Krzysztof