[PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013)

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013)
@ 2024-03-24 14:03 Stanislav Jakubek
  2024-03-24 14:04 ` [PATCH 2/2] ARM: dts: qcom: Add support for " Stanislav Jakubek
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Stanislav Jakubek @ 2024-03-24 14:03 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-arm-kernel, phone-devel,
	linux-kernel

Document the Motorola Moto G (2013), which is a smartphone based
on the Qualcomm MSM8226 SoC.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 66beaac60e1d..d2910982ae86 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -137,6 +137,7 @@ properties:
               - microsoft,dempsey
               - microsoft,makepeace
               - microsoft,moneypenny
+              - motorola,falcon
               - samsung,s3ve3g
           - const: qcom,msm8226
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 2/2] ARM: dts: qcom: Add support for Motorola Moto G (2013)
  2024-03-24 14:03 [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013) Stanislav Jakubek
@ 2024-03-24 14:04 ` Stanislav Jakubek
  2024-03-25 19:28   ` Konrad Dybcio
  2024-03-25 12:18 ` [PATCH 1/2] dt-bindings: arm: qcom: Add " Krzysztof Kozlowski
  2024-03-25 13:55 ` Rob Herring
  2 siblings, 1 reply; 7+ messages in thread
From: Stanislav Jakubek @ 2024-03-24 14:04 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-arm-kernel, phone-devel,
	linux-kernel

Add a device tree for the Motorola Moto G (2013) smartphone based
on the Qualcomm MSM8226 SoC.

Initially supported features:
  - Buttons (Volume Down/Up, Power)
  - eMMC
  - Hall Effect Sensor
  - SimpleFB display
  - TMP108 temperature sensor
  - Vibrator

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
 arch/arm/boot/dts/qcom/Makefile               |   1 +
 .../boot/dts/qcom/msm8226-motorola-falcon.dts | 355 ++++++++++++++++++
 2 files changed, 356 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts

diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 6478a39b3be5..3eacbf5c0785 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM) += \
+	msm8226-motorola-falcon.dtb \
 	qcom-apq8016-sbc.dtb \
 	qcom-apq8026-asus-sparrow.dtb \
 	qcom-apq8026-huawei-sturgeon.dtb \
diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
new file mode 100644
index 000000000000..acf0e3fee481
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G (2013)";
+	compatible = "motorola,falcon", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+			vsp-supply = <&reg_lcd_pos>;
+			vsn-supply = <&reg_lcd_neg>;
+			vddio-supply = <&vddio_disp_vreg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vddio_disp_vreg: regulator-vddio-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_disp";
+		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pm8226_l8>;
+		startup-delay-us = <300>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		hob-ram@f500000 {
+			reg = <0x0f500000 0x40000>,
+			      <0x0f540000 0x2000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		/* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+		pinctrl-0 = <&reg_lcd_default>;
+		pinctrl-names = "default";
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&temp_alert_default>;
+		pinctrl-names = "default";
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	reg_lcd_default: reg-lcd-default-state {
+		pins = "gpio31", "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	reg_vddio_disp_default: reg-vddio-disp-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	temp_alert_default: temp-alert-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH 2/2] ARM: dts: qcom: Add support for Motorola Moto G (2013)
  2024-03-24 14:04 ` [PATCH 2/2] ARM: dts: qcom: Add support for " Stanislav Jakubek
@ 2024-03-25 19:28   ` Konrad Dybcio
  2024-03-25 20:25     ` Stanislav Jakubek
  0 siblings, 1 reply; 7+ messages in thread
From: Konrad Dybcio @ 2024-03-25 19:28 UTC (permalink / raw)
  To: Stanislav Jakubek, Bjorn Andersson, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-arm-kernel, phone-devel,
	linux-kernel

On 24.03.2024 3:04 PM, Stanislav Jakubek wrote:
> Add a device tree for the Motorola Moto G (2013) smartphone based
> on the Qualcomm MSM8226 SoC.
> 
> Initially supported features:
>   - Buttons (Volume Down/Up, Power)
>   - eMMC
>   - Hall Effect Sensor
>   - SimpleFB display
>   - TMP108 temperature sensor
>   - Vibrator
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---

[...]

> +		hob-ram@f500000 {
> +			reg = <0x0f500000 0x40000>,
> +			      <0x0f540000 0x2000>;
> +			no-map;
> +		};

Any reason it's in two parts? Should it be one contiguous region, or
two separate nodes?

lgtm otherwise

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 2/2] ARM: dts: qcom: Add support for Motorola Moto G (2013)
  2024-03-25 19:28   ` Konrad Dybcio
@ 2024-03-25 20:25     ` Stanislav Jakubek
  2024-03-26 10:10       ` Konrad Dybcio
  0 siblings, 1 reply; 7+ messages in thread
From: Stanislav Jakubek @ 2024-03-25 20:25 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	linux-arm-msm, devicetree, linux-arm-kernel, phone-devel,
	linux-kernel

On Mon, Mar 25, 2024 at 08:28:27PM +0100, Konrad Dybcio wrote:
> On 24.03.2024 3:04 PM, Stanislav Jakubek wrote:
> > Add a device tree for the Motorola Moto G (2013) smartphone based
> > on the Qualcomm MSM8226 SoC.
> > 
> > Initially supported features:
> >   - Buttons (Volume Down/Up, Power)
> >   - eMMC
> >   - Hall Effect Sensor
> >   - SimpleFB display
> >   - TMP108 temperature sensor
> >   - Vibrator
> > 
> > Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> > ---
> 
> [...]
> 
> > +		hob-ram@f500000 {
> > +			reg = <0x0f500000 0x40000>,
> > +			      <0x0f540000 0x2000>;
> > +			no-map;
> > +		};
> 
> Any reason it's in two parts? Should it be one contiguous region, or
> two separate nodes?
> 
> lgtm otherwise

Hi Konrad, I copied this from downstream as-is.
According to the downstream docs [1]:

HOB RAM MMAP Device provides ability for userspace to access the
hand over block memory to read out modem related parameters.

And the two regs are the "DHOB partition" and "SHOB partition".

I suppose this is something Motorola (firmware?) specific (since the
downstream compatible is mmi,hob_ram [2]).
Should I split this into 2 nodes - dhob@f500000 and shob@f540000?

Stanislav

[1] https://github.com/LineageOS/android_kernel_motorola_msm8226/blob/cm-14.1/Documentation/devicetree/bindings/misc/hob_ram.txt
[2] https://github.com/LineageOS/android_kernel_motorola_msm8226/blob/cm-14.1/arch/arm/boot/dts/msm8226-moto-common.dtsi#L258

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 2/2] ARM: dts: qcom: Add support for Motorola Moto G (2013)
  2024-03-25 20:25     ` Stanislav Jakubek
@ 2024-03-26 10:10       ` Konrad Dybcio
  0 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2024-03-26 10:10 UTC (permalink / raw)
  To: Stanislav Jakubek
  Cc: Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	linux-arm-msm, devicetree, linux-arm-kernel, phone-devel,
	linux-kernel

On 25.03.2024 9:25 PM, Stanislav Jakubek wrote:
> On Mon, Mar 25, 2024 at 08:28:27PM +0100, Konrad Dybcio wrote:
>> On 24.03.2024 3:04 PM, Stanislav Jakubek wrote:
>>> Add a device tree for the Motorola Moto G (2013) smartphone based
>>> on the Qualcomm MSM8226 SoC.
>>>
>>> Initially supported features:
>>>   - Buttons (Volume Down/Up, Power)
>>>   - eMMC
>>>   - Hall Effect Sensor
>>>   - SimpleFB display
>>>   - TMP108 temperature sensor
>>>   - Vibrator
>>>
>>> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
>>> ---
>>
>> [...]
>>
>>> +		hob-ram@f500000 {
>>> +			reg = <0x0f500000 0x40000>,
>>> +			      <0x0f540000 0x2000>;
>>> +			no-map;
>>> +		};
>>
>> Any reason it's in two parts? Should it be one contiguous region, or
>> two separate nodes?
>>
>> lgtm otherwise
> 
> Hi Konrad, I copied this from downstream as-is.
> According to the downstream docs [1]:
> 
> HOB RAM MMAP Device provides ability for userspace to access the
> hand over block memory to read out modem related parameters.
> 
> And the two regs are the "DHOB partition" and "SHOB partition".

Oh right, motorola made some inventions here..

> 
> I suppose this is something Motorola (firmware?) specific (since the
> downstream compatible is mmi,hob_ram [2]).
> Should I split this into 2 nodes - dhob@f500000 and shob@f540000?

Yes please and add the downstream txt link to the commit message in case
somebody was curious down the line.

Konrad

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013)
  2024-03-24 14:03 [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013) Stanislav Jakubek
  2024-03-24 14:04 ` [PATCH 2/2] ARM: dts: qcom: Add support for " Stanislav Jakubek
@ 2024-03-25 12:18 ` Krzysztof Kozlowski
  2024-03-25 13:55 ` Rob Herring
  2 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2024-03-25 12:18 UTC (permalink / raw)
  To: Stanislav Jakubek, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-arm-kernel, phone-devel,
	linux-kernel

On 24/03/2024 15:03, Stanislav Jakubek wrote:
> Document the Motorola Moto G (2013), which is a smartphone based
> on the Qualcomm MSM8226 SoC.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013)
  2024-03-24 14:03 [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013) Stanislav Jakubek
  2024-03-24 14:04 ` [PATCH 2/2] ARM: dts: qcom: Add support for " Stanislav Jakubek
  2024-03-25 12:18 ` [PATCH 1/2] dt-bindings: arm: qcom: Add " Krzysztof Kozlowski
@ 2024-03-25 13:55 ` Rob Herring
  2 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2024-03-25 13:55 UTC (permalink / raw)
  To: Stanislav Jakubek
  Cc: Conor Dooley, Bjorn Andersson, linux-arm-kernel, linux-kernel,
	phone-devel, linux-arm-msm, Krzysztof Kozlowski, Konrad Dybcio,
	devicetree


On Sun, 24 Mar 2024 15:03:59 +0100, Stanislav Jakubek wrote:
> Document the Motorola Moto G (2013), which is a smartphone based
> on the Qualcomm MSM8226 SoC.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/msm8226-motorola-falcon.dtb' for f5d4d71cd59f25b80889ef88fa044aa3a4268d46.1711288736.git.stano.jakubek@gmail.com:

arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dtb: syscon@f9011000: compatible: 'anyOf' conditional failed, one must be fixed:
	['syscon'] is too short
	'syscon' is not one of ['allwinner,sun8i-a83t-system-controller', 'allwinner,sun8i-h3-system-controller', 'allwinner,sun8i-v3s-system-controller', 'allwinner,sun50i-a64-system-controller', 'amd,pensando-elba-syscon', 'brcm,cru-clkset', 'freecom,fsg-cs2-system-controller', 'fsl,imx93-aonmix-ns-syscfg', 'fsl,imx93-wakeupmix-syscfg', 'hisilicon,dsa-subctrl', 'hisilicon,hi6220-sramctrl', 'hisilicon,pcie-sas-subctrl', 'hisilicon,peri-subctrl', 'hpe,gxp-sysreg', 'intel,lgm-syscon', 'loongson,ls1b-syscon', 'loongson,ls1c-syscon', 'marvell,armada-3700-usb2-host-misc', 'mediatek,mt8135-pctl-a-syscfg', 'mediatek,mt8135-pctl-b-syscfg', 'mediatek,mt8365-syscfg', 'microchip,lan966x-cpu-syscon', 'microchip,sparx5-cpu-syscon', 'mstar,msc313-pmsleep', 'nuvoton,ma35d1-sys', 'nuvoton,wpcm450-shm', 'rockchip,px30-qos', 'rockchip,rk3036-qos', 'rockchip,rk3066-qos', 'rockchip,rk3128-qos', 'rockchip,rk3228-qos', 'rockchip,rk3288-qos', 'rockchip,rk3368-qos', 'rockchip,rk3399-qos', 'rockchip,rk3568-qos', 'rockchip,rk3588-qos', 'rockchip,rv1126-qos', 'starfive,jh7100-sysmain', 'ti,am62-usb-phy-ctrl', 'ti,am654-dss-oldi-io-ctrl', 'ti,am654-serdes-ctrl', 'ti,j784s4-pcie-ctrl']
	from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#






^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2024-03-26 10:10 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-03-24 14:03 [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G (2013) Stanislav Jakubek
2024-03-24 14:04 ` [PATCH 2/2] ARM: dts: qcom: Add support for " Stanislav Jakubek
2024-03-25 19:28   ` Konrad Dybcio
2024-03-25 20:25     ` Stanislav Jakubek
2024-03-26 10:10       ` Konrad Dybcio
2024-03-25 12:18 ` [PATCH 1/2] dt-bindings: arm: qcom: Add " Krzysztof Kozlowski
2024-03-25 13:55 ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).