devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Nuno Sá" <noname.nuno@gmail.com>
To: "Jonathan Cameron" <jonathan.cameron@huawei.com>,
	"Nuno Sá" <nuno.sa@analog.com>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>,
	Jonathan Cameron <jic23@kernel.org>,
	David Lechner <dlechner@baylibre.com>,
	Andy Shevchenko <andy@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	 linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/3] dt-bindings: iio: dac: Document AD5446 and similar devices
Date: Mon, 27 Oct 2025 14:48:50 +0000	[thread overview]
Message-ID: <ffb2512aad9bec33b0fe27035f88e79636362645.camel@gmail.com> (raw)
In-Reply-To: <20251023180831.000026ca@huawei.com>

On Thu, 2025-10-23 at 18:08 +0100, Jonathan Cameron wrote:
> On Thu, 23 Oct 2025 14:01:37 +0300
> Nuno Sá <nuno.sa@analog.com> wrote:
> 
> > Add device tree binding documentation for the Analog Devices AD5446
> > family of Digital-to-Analog Converters and compatible devices from
> > Texas Instruments. There's both SPI and I2C interfaces and feature
> > resolutions ranging from 8-bit to 16-bit.
> > 
> > The binding covers 29 compatible devices including the AD5446 series,
> > AD5600 series, AD5620/5640/5660 variants with different voltage ranges,
> > and TI DAC081s101/DAC101s101/DAC121s101 devices.
> > 
> > Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> Hi Nuno,
> 
> Thanks for filling in this missing doc.  I wonder what else is old
> enough that we still don't have docs? Guess I should check when
> I'm next bored enough (so that's not happening any time soon ;)

Yeah, wouldn't be surprised if there's some more ADI old stuff hanging around.
This caught my attention since I saw that out of tree patch adding support for a
new device (with no real reason for not being in tree).

> 
> > ---
> >  .../devicetree/bindings/iio/dac/adi,ad5446.yaml    | 138
> > +++++++++++++++++++++
> >  MAINTAINERS                                        |   8 ++
> >  2 files changed, 146 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
> > b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
> > new file mode 100644
> > index 000000000000..90fc8ca053fe
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
> > @@ -0,0 +1,138 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/dac/adi,ad5446.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices AD5446 and similar DACs
> > +
> > +maintainers:
> > +  - Michael Hennerich <michael.hennerich@analog.com>
> > +  - Nuno Sá <nuno.sa@analog.com>
> > +
> > +description: |
> 
> Trivial but don't need the | as hardly matters if these get formatted
> differently.

Sure.

> 
> > +  Digital to Analog Converter devices supporting both SPI and I2C
> > interfaces.
> > +  These devices feature a range of resolutions from 8-bit to 16-bit.
> 
> ...
> 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 940889b158eb..dae04c308975 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -440,6 +440,14 @@ W:	http://wiki.analog.com/AD5398
> >  W:	https://ez.analog.com/linux-software-drivers
> >  F:	drivers/regulator/ad5398.c
> >  
> > +AD5456	DAC DRIVER
> Tab seems odd here. 
> 
> Hmm. For a lot of ADI drivers we have entries that would look like
> ANALOG DEVICES INC AD5456 DAC DRIVER
> 
> Any reason for formatting it like this?

Ok, time to come clean :)

Bindings were AI generated and then I just cleaned the obvious problems (clearly
I did not payed too much attention to the boilerplate stuff - lesson learned).

- Nuno Sá

> 
> > +M:	Michael Hennerich <michael.hennerich@analog.com>
> > +M:	Nuno Sá <nuno.sa@analog.com>
> > +L:	linux-iio@vger.kernel.org
> > +S:	Supported
> > +W:	https://ez.analog.com/linux-software-drivers
> > +F:	Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
> > +
> >  AD714X CAPACITANCE TOUCH SENSOR DRIVER (AD7142/3/7/8/7A)
> >  M:	Michael Hennerich <michael.hennerich@analog.com>
> >  S:	Supported
> > 

  reply	other threads:[~2025-10-27 14:48 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-23 11:01 [PATCH v2 0/3] iio: dac: ad5446: Add AD5542 to the spi id table Nuno Sá
2025-10-23 11:01 ` [PATCH v2 1/3] dt-bindings: iio: dac: Document AD5446 and similar devices Nuno Sá
2025-10-23 17:08   ` Jonathan Cameron
2025-10-27 14:48     ` Nuno Sá [this message]
2025-10-27 15:01       ` Jonathan Cameron
2025-10-30 11:30         ` Nuno Sá
2025-11-02 12:13           ` Jonathan Cameron
2025-10-23 18:24   ` Conor Dooley
2025-10-24 10:12     ` Jonathan Cameron
2025-10-24 11:04       ` Conor Dooley
2025-10-27 14:49         ` Nuno Sá
2025-10-23 11:01 ` [PATCH v2 2/3] iio: dac: ad5456: Add missing DT compatibles Nuno Sá
2025-10-23 17:13   ` Jonathan Cameron
2025-10-27 14:55     ` Nuno Sá
2025-10-24 16:29   ` Andy Shevchenko
2025-10-24 18:41     ` Jonathan Cameron
2025-10-23 11:01 ` [PATCH v2 3/3] iio: dac: ad5446: Add AD5542 to the spi id table Nuno Sá

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ffb2512aad9bec33b0fe27035f88e79636362645.camel@gmail.com \
    --to=noname.nuno@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=jonathan.cameron@huawei.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).