Re: [PATCH 2/6] arm64: dts: imx8mp-phycore: Assign regulator to EEPROM node

[Yannic Moog <Y.Moog@phytec.de>]

On Wed, 2024-08-14 at 11:26 +0200, Teresa Remmet wrote:
> From: Yashwanth Varakala <y.varakala@phytec.de>
> 
> Add VDD_IO regulator reference to the EEPROM node to reflect the
> schematic. This also silences the fallback dummy regulator warning.
> 
> Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> index 9c5272c6931a..a5ecdca8bc0e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> @@ -179,6 +179,7 @@ eeprom@51 {
>  		compatible = "atmel,24c32";
>  		reg = <0x51>;
>  		pagesize = <32>;
> +		vcc-supply = <&reg_vdd_io>;
>  	};
>  
>  	rv3028: rtc@52 {
>