From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rui Miguel Silva Subject: Re: [PATCH v13 10/13] media: imx7.rst: add documentation for i.MX7 media driver Date: Wed, 06 Feb 2019 14:31:40 +0000 Message-ID: References: <20190206102522.29212-1-rui.silva@linaro.org> <20190206102522.29212-11-rui.silva@linaro.org> <20a5f044-9ce6-1ead-9bc4-3e6008706928@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <20a5f044-9ce6-1ead-9bc4-3e6008706928@xs4all.nl> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: driverdev-devel-bounces@linuxdriverproject.org Sender: "devel" To: Hans Verkuil Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org, sakari.ailus@linux.intel.com, Greg Kroah-Hartman , Philipp Zabel , Steve Longerbeam , linux-media@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Hans, On Wed 06 Feb 2019 at 10:54, Hans Verkuil wrote: > On 2/6/19 11:25 AM, Rui Miguel Silva wrote: >> Add rst document to describe the i.MX7 media driver and also a >> working >> example from the Warp7 board usage with a OV2680 sensor. >> >> Signed-off-by: Rui Miguel Silva >> Acked-by: Sakari Ailus > > Checkpatch gives me: > > Applying: media: imx7.rst: add documentation for i.MX7 media > driver > WARNING: added, moved or deleted file(s), does MAINTAINERS need > updating? > #2: > new file mode 100644 > > WARNING: Missing or malformed SPDX-License-Identifier tag in > line 1 > #7: FILE: Documentation/media/v4l-drivers/imx7.rst:1: > +i.MX7 Video Capture Driver > > total: 0 errors, 2 warnings, 164 lines checked Yeah, I missed checkpatch in the rst file. > > Both warnings are valid, so can you make a v13.1 for this patch > only? > Just include the MAINTAINERS change in this patch. I will send a complete v14 since I screw up the first patch also. Thanks any way. --- Cheers, Rui > > Regards, > > Hans > >> --- >> Documentation/media/v4l-drivers/imx7.rst | 157 >> ++++++++++++++++++++++ >> Documentation/media/v4l-drivers/index.rst | 1 + >> 2 files changed, 158 insertions(+) >> create mode 100644 Documentation/media/v4l-drivers/imx7.rst >> >> diff --git a/Documentation/media/v4l-drivers/imx7.rst >> b/Documentation/media/v4l-drivers/imx7.rst >> new file mode 100644 >> index 000000000000..cd1195d391c5 >> --- /dev/null >> +++ b/Documentation/media/v4l-drivers/imx7.rst >> @@ -0,0 +1,157 @@ >> +i.MX7 Video Capture Driver >> +========================== >> + >> +Introduction >> +------------ >> + >> +The i.MX7 contrary to the i.MX5/6 family does not contain an >> Image Processing >> +Unit (IPU); because of that the capabilities to perform >> operations or >> +manipulation of the capture frames are less feature rich. >> + >> +For image capture the i.MX7 has three units: >> +- CMOS Sensor Interface (CSI) >> +- Video Multiplexer >> +- MIPI CSI-2 Receiver >> + >> +:: >> + |\ >> + MIPI Camera Input ---> MIPI CSI-2 --- > | \ >> + | \ >> + | M | >> + | U | ------> CSI >> ---> Capture >> + | X | >> + | / >> + Parallel Camera Input ----------------> | / >> + |/ >> + >> +For additional information, please refer to the latest >> versions of the i.MX7 >> +reference manual [#f1]_. >> + >> +Entities >> +-------- >> + >> +imx7-mipi-csi2 >> +-------------- >> + >> +This is the MIPI CSI-2 receiver entity. It has one sink pad to >> receive the pixel >> +data from MIPI CSI-2 camera sensor. It has one source pad, >> corresponding to the >> +virtual channel 0. This module is compliant to previous >> version of Samsung >> +D-phy, and supports two D-PHY Rx Data lanes. >> + >> +csi_mux >> +------- >> + >> +This is the video multiplexer. It has two sink pads to select >> from either camera >> +sensor with a parallel interface or from MIPI CSI-2 virtual >> channel 0. It has >> +a single source pad that routes to the CSI. >> + >> +csi >> +--- >> + >> +The CSI enables the chip to connect directly to external CMOS >> image sensor. CSI >> +can interface directly with Parallel and MIPI CSI-2 buses. It >> has 256 x 64 FIFO >> +to store received image pixel data and embedded DMA >> controllers to transfer data >> +from the FIFO through AHB bus. >> + >> +This entity has one sink pad that receives from the csi_mux >> entity and a single >> +source pad that routes video frames directly to memory >> buffers. This pad is >> +routed to a capture device node. >> + >> +Usage Notes >> +----------- >> + >> +To aid in configuration and for backward compatibility with >> V4L2 applications >> +that access controls only from video device nodes, the capture >> device interfaces >> +inherit controls from the active entities in the current >> pipeline, so controls >> +can be accessed either directly from the subdev or from the >> active capture >> +device interface. For example, the sensor controls are >> available either from the >> +sensor subdevs or from the active capture device. >> + >> +Warp7 with OV2680 >> +----------------- >> + >> +On this platform an OV2680 MIPI CSI-2 module is connected to >> the internal MIPI >> +CSI-2 receiver. The following example configures a video >> capture pipeline with >> +an output of 800x600, and BGGR 10 bit bayer format: >> + >> +.. code-block:: none >> + # Setup links >> + media-ctl -l "'ov2680 1-0036':0 -> 'imx7-mipi-csis.0':0[1]" >> + media-ctl -l "'imx7-mipi-csis.0':1 -> 'csi_mux':1[1]" >> + media-ctl -l "'csi_mux':2 -> 'csi':0[1]" >> + media-ctl -l "'csi':1 -> 'csi capture':0[1]" >> + >> + # Configure pads for pipeline >> + media-ctl -V "'ov2680 1-0036':0 [fmt:SBGGR10_1X10/800x600 >> field:none]" >> + media-ctl -V "'csi_mux':1 [fmt:SBGGR10_1X10/800x600 >> field:none]" >> + media-ctl -V "'csi_mux':2 [fmt:SBGGR10_1X10/800x600 >> field:none]" >> + media-ctl -V "'imx7-mipi-csis.0':0 >> [fmt:SBGGR10_1X10/800x600 field:none]" >> + media-ctl -V "'csi':0 [fmt:SBGGR10_1X10/800x600 >> field:none]" >> + >> +After this streaming can start. The v4l2-ctl tool can be used >> to select any of >> +the resolutions supported by the sensor. >> + >> +.. code-block:: none >> + root@imx7s-warp:~# media-ctl -p >> + Media controller API version 4.17.0 >> + >> + Media device information >> + ------------------------ >> + driver imx-media >> + model imx-media >> + serial >> + bus info >> + hw revision 0x0 >> + driver version 4.17.0 >> + >> + Device topology >> + - entity 1: csi (2 pads, 2 links) >> + type V4L2 subdev subtype Unknown flags 0 >> + device node name /dev/v4l-subdev0 >> + pad0: Sink >> + [fmt:SBGGR10_1X10/800x600 field:none] >> + <- "csi_mux":2 [ENABLED] >> + pad1: Source >> + [fmt:SBGGR10_1X10/800x600 field:none] >> + -> "csi capture":0 [ENABLED] >> + >> + - entity 4: csi capture (1 pad, 1 link) >> + type Node subtype V4L flags 0 >> + device node name /dev/video0 >> + pad0: Sink >> + <- "csi":1 [ENABLED] >> + >> + - entity 10: csi_mux (3 pads, 2 links) >> + type V4L2 subdev subtype Unknown flags 0 >> + device node name /dev/v4l-subdev1 >> + pad0: Sink >> + [fmt:unknown/0x0] >> + pad1: Sink >> + [fmt:unknown/800x600 field:none] >> + <- "imx7-mipi-csis.0":1 [ENABLED] >> + pad2: Source >> + [fmt:unknown/800x600 field:none] >> + -> "csi":0 [ENABLED] >> + >> + - entity 14: imx7-mipi-csis.0 (2 pads, 2 links) >> + type V4L2 subdev subtype Unknown flags 0 >> + device node name /dev/v4l-subdev2 >> + pad0: Sink >> + [fmt:SBGGR10_1X10/800x600 field:none] >> + <- "ov2680 1-0036":0 [ENABLED] >> + pad1: Source >> + [fmt:SBGGR10_1X10/800x600 field:none] >> + -> "csi_mux":1 [ENABLED] >> + >> + - entity 17: ov2680 1-0036 (1 pad, 1 link) >> + type V4L2 subdev subtype Sensor flags 0 >> + device node name /dev/v4l-subdev3 >> + pad0: Source >> + [fmt:SBGGR10_1X10/800x600 field:none] >> + -> "imx7-mipi-csis.0":0 [ENABLED] >> + >> + >> +References >> +---------- >> + >> +.. [#f1] >> https://www.nxp.com/docs/en/reference-manual/IMX7SRM.pdf >> diff --git a/Documentation/media/v4l-drivers/index.rst >> b/Documentation/media/v4l-drivers/index.rst >> index f28570ec9e42..dfd4b205937c 100644 >> --- a/Documentation/media/v4l-drivers/index.rst >> +++ b/Documentation/media/v4l-drivers/index.rst >> @@ -44,6 +44,7 @@ For more details see the file COPYING in the >> source distribution of Linux. >> davinci-vpbe >> fimc >> imx >> + imx7 >> ipu3 >> ivtv >> max2175 >>