devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Fabian Vogt" <fabian@ritter-vogt.de>
To: monstr@monstr.eu
Cc: "linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	grant.likely@linaro.org, pawel.moll@arm.com
Subject: Re: [PATCH] [V2] gpio: New driver for LSI ZEVIO SoCs
Date: Wed, 07 Aug 2013 14:51:58 +0200	[thread overview]
Message-ID: <op.w1f50wocu7prd4@fabians-laptop.fritz.box> (raw)
In-Reply-To: <5201F2CD.8060301@monstr.eu>

Hi,

>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/gpio/gpio-zevio.txt
>> @@ -0,0 +1,19 @@
>> +Zevio GPIO controller
>> +
>> +Required properties:
>> +- compatible = "lsi,zevio-gpio"
>> +- reg = <BASEADDR SIZE>
>> +- #gpio-cells = <2>
>> +- gpio-controller;
>> +
>> +Optional:
>> +- #ngpios = <32>: Number of GPIOs. Defaults to 32 if absent
>> +
>> +Example:
>> +	gpio: gpio@90000000 {
>> +		compatible = "lsi,zevio-gpio";
>> +		reg = <0x90000000 0x1000>;
>> +	
>
> <tab> here and I can't see the reason to have this blank line here.
>
>> +		gpio-controller;
>> +		#gpio-cells = <2>;
>> +	};
>> \ No newline at end of file
>
> Doesn't look right.
>
>> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
>> index b2450ba..ba8c357 100644
>> --- a/drivers/gpio/Kconfig
>> +++ b/drivers/gpio/Kconfig
>> @@ -138,6 +138,13 @@ config GPIO_EP93XX
>>  	depends on ARCH_EP93XX
>>  	select GPIO_GENERIC
>>
>> +config GPIO_ZEVIO
>> +	bool "LSI ZEVIO SoC memory mapped GPIOs"
>> +	depends on ARCH_NSPIRE
>> +	select GENERIC_IRQ_CHIP
>> +	help
>> +	  Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
>> +
>
> Not sure how subsystem maintainer handle this but I would prefer
> to keep this sorted as it is done in Makefile.

Yes, but without the gpio-zevio.c file the Kconfig item and the Makefile
entry wouldn't work and vice-versa. The three latest patches which added  
GPIO
drivers weren't split as well.

>> --- a/drivers/gpio/Makefile
>> +++ b/drivers/gpio/Makefile
>> @@ -87,3 +87,4 @@ obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x.o
>>  obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
>>  obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
>>  obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o
>> +obj-$(CONFIG_GPIO_ZEVIO)	+= gpio-zevio.o
>> \ No newline at end of file
>
> ditto.
>
> The patch contains several trailing whitespace reported by checkpatch.pl
> which should be fixed.
Oh, I accidentially sent the uncleaned version of the patch, sorry.
I'll resend the cleaned version as V3.

Bye,
Fabian

      reply	other threads:[~2013-08-07 12:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-06 19:53 [PATCH] [V2] gpio: New driver for LSI ZEVIO SoCs Fabian Vogt
2013-08-07  7:10 ` Michal Simek
2013-08-07 12:51   ` Fabian Vogt [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=op.w1f50wocu7prd4@fabians-laptop.fritz.box \
    --to=fabian@ritter-vogt.de \
    --cc=devicetree@vger.kernel.org \
    --cc=grant.likely@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=monstr@monstr.eu \
    --cc=pawel.moll@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).