From: Takashi Iwai <tiwai@suse.de>
To: Lucas Tanure <tanureal@opensource.cirrus.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
<alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 00/20] Support external boost at CS35l41 ASoC driver
Date: Fri, 04 Mar 2022 18:05:25 +0100 [thread overview]
Message-ID: <s5htucdr6lm.wl-tiwai@suse.de> (raw)
In-Reply-To: <20220304150721.3802-1-tanureal@opensource.cirrus.com>
On Fri, 04 Mar 2022 16:07:01 +0100,
Lucas Tanure wrote:
>
> Move the support for CS35L41 external boost to its shared library
> for ASoC use.
> This move resulted in cs35l41_hda_reg_sequence being removed,
> and its steps were broken down into regmap writes or functions
> from the library. And hardware configuration struct was unified
> for its use in the shared lib.
> While at it, some minor bugs were found and fixed it.
>
> v2 changelog:
> - Instead of removing the log, playback actions will log the last regmap access.
> - Documentation patch with the correct subject line and fixed bug reported by Rob Herring on the
> provided example.
>
> Previous versions:
> v1: https://lkml.org/lkml/2022/3/3/759
>
> David Rhodes (2):
> ASoC: cs35l41: Fix GPIO2 configuration
> ASoC: cs35l41: Document CS35l41 External Boost
>
> Lucas Tanure (18):
> ASoC: cs35l41: Fix max number of TX channels
> ASoC: cs35l41: Fix DSP mbox start command and global enable order
> ASoC: cs35l41: Remove unnecessary param
> sound: cs35l41: Unify hardware configuration
> sound: cs35l41: Check hw_config before using it
> sound: cs35l41: Move cs35l41_gpio_config to shared lib
> hda: cs35l41: Fix I2S params comments
> hda: cs35l41: Always configure the DAI
> hda: cs35l41: Add Boost type flag
> hda: cs35l41: Put the device into safe mode for external boost
> hda: cs35l41: Mute the device before shutdown
> sound: cs35l41: Enable Internal Boost in shared lib
> hda: cs35l41: Move boost config to initialization code
> hda: cs35l41: Remove cs35l41_hda_reg_sequence struct
> hda: cs35l41: Reorganize log for playback actions
> hda: cs35l41: Handle all external boost setups the same way
> hda: cs35l41: Move external boost handling to lib for ASoC use
> ASoC: cs35l41: Support external boost
Through a quick glance, the code changes look OK in general.
But please correct the subject prefix. For non-ASoC patches (that
begin with either "hda" or "sound" in this patch set) should be with
"ALSA: hda: xxx" or such.
Also, although I respect the spirit of Haiku, the patch logs could be
a bit more verbose and descriptive, and the texts can be folded at the
right column. Some patch descriptions are too short, e.g. patch 15
doesn't mention about the new usleep_range() addition in the code.
thanks,
Takashi
next prev parent reply other threads:[~2022-03-04 17:05 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 15:07 [PATCH v2 00/20] Support external boost at CS35l41 ASoC driver Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 01/20] ASoC: cs35l41: Fix GPIO2 configuration Lucas Tanure
2022-03-04 15:22 ` Charles Keepax
2022-03-04 15:44 ` tanureal
2022-03-04 15:07 ` [PATCH v2 02/20] ASoC: cs35l41: Fix max number of TX channels Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 03/20] ASoC: cs35l41: Fix DSP mbox start command and global enable order Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 04/20] ASoC: cs35l41: Remove unnecessary param Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 05/20] sound: cs35l41: Unify hardware configuration Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 06/20] sound: cs35l41: Check hw_config before using it Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 07/20] sound: cs35l41: Move cs35l41_gpio_config to shared lib Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 08/20] hda: cs35l41: Fix I2S params comments Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 09/20] hda: cs35l41: Always configure the DAI Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 10/20] hda: cs35l41: Add Boost type flag Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 11/20] hda: cs35l41: Put the device into safe mode for external boost Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 12/20] hda: cs35l41: Mute the device before shutdown Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 13/20] sound: cs35l41: Enable Internal Boost in shared lib Lucas Tanure
2022-03-04 16:17 ` Charles Keepax
2022-03-04 15:07 ` [PATCH v2 14/20] hda: cs35l41: Move boost config to initialization code Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 15/20] hda: cs35l41: Remove cs35l41_hda_reg_sequence struct Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 16/20] hda: cs35l41: Reorganize log for playback actions Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 17/20] hda: cs35l41: Handle all external boost setups the same way Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 18/20] hda: cs35l41: Move external boost handling to lib for ASoC use Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 19/20] ASoC: cs35l41: Support external boost Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 20/20] ASoC: cs35l41: Document CS35l41 External Boost Lucas Tanure
2022-03-04 17:05 ` Takashi Iwai [this message]
2022-03-07 20:38 ` (subset) [PATCH v2 00/20] Support external boost at CS35l41 ASoC driver Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5htucdr6lm.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tanureal@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).