Devicetree
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Fil Dunsky" <filipp.dunsky@gmail.com>
Cc: linux-serial@vger.kernel.org, robh@kernel.org,
	devicetree@vger.kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH RFC v2 08/10] ARM: dts: cortina: Add CS7542 SoC and Securifi Almond+ board
Date: Tue, 06 Oct 2026 18:23:33 +0000	[thread overview]
Message-ID: <sashiko-outbox-162338@kernel.org> (raw)
In-Reply-To: <20261006-b4-cs75xx-v2-8-b7d6e1e24d44@gmail.com>

> From: Fil Dunsky <filipp.dunsky@gmail.com>
> 
> Add a minimal description of the Cortina Systems CS7542 SoC: the two
> Cortex-A9 cores, SCU, GIC, global timer, private timer and watchdog,
> PL310 L2 cache controller and the four on-chip UARTs.
> 
> The peripheral clock (APB) runs at 100, 150 or 170 MHz depending on the
> boot strap pins. Until there is a driver for the global control block
> that reads the straps, model it as a fixed clock whose rate is provided
> by the board.
> 
> The Securifi Almond+ is a touchscreen Wi-Fi router with 512 MiB of DDR3,
> 512 MiB of NAND flash, a QCA8337 switch, QCA9880 and AR9580 Wi-Fi and an
> ASM1042 USB 3.0 controller behind the SoC PCIe root ports. For now,
> describe the memory, the console UART and a ramoops region, and reserve
> the top 64 MiB of RAM which the vendor firmware hands to the packet
> engine queue manager.
> 
> Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261006-b4-cs75xx-v2-0-b7d6e1e24d44@gmail.com?part=8


  reply	other threads:[~2026-10-06 18:23 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-06 18:17 [PATCH RFC v2 00/10] ARM: Add support for Cortina Systems CS75xx and Securifi Almond+ Fil Dunsky via B4 Relay
2026-10-06 18:17 ` [PATCH RFC v2 01/10] dt-bindings: vendor-prefixes: Add Securifi Fil Dunsky via B4 Relay
2026-10-06 18:18   ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 02/10] dt-bindings: arm: Add Cortina Systems CS7542 and Securifi Almond+ Fil Dunsky via B4 Relay
2026-10-06 18:20   ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 03/10] dt-bindings: arm: cpus: Add Cortina Systems CS7542 enable method Fil Dunsky via B4 Relay
2026-10-06 18:21   ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 04/10] ARM: goldengate: Add support for the CS75xx SoC family Fil Dunsky via B4 Relay
2026-10-06 18:31   ` sashiko-bot
2026-10-07 11:40   ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 05/10] ARM: debug: Add Cortina Systems CS75xx UART0 support Fil Dunsky via B4 Relay
2026-10-06 18:25   ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 06/10] dt-bindings: serial: Add Cortina Systems CS7542 UART Fil Dunsky via B4 Relay
2026-10-06 18:19   ` sashiko-bot
2026-10-07 11:40   ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 07/10] tty: serial: Add Cortina UART driver Fil Dunsky via B4 Relay
2026-10-06 18:27   ` sashiko-bot
2026-10-06 18:17 ` [PATCH RFC v2 08/10] ARM: dts: cortina: Add CS7542 SoC and Securifi Almond+ board Fil Dunsky via B4 Relay
2026-10-06 18:23   ` sashiko-bot [this message]
2026-10-07 11:41   ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 09/10] ARM: multi_v7_defconfig: Enable Cortina Systems CS75xx support Fil Dunsky via B4 Relay
2026-10-06 18:21   ` sashiko-bot
2026-10-07 11:42   ` Linus Walleij
2026-10-06 18:17 ` [PATCH RFC v2 10/10] MAINTAINERS: Add entry for Cortina Systems CS75xx Fil Dunsky via B4 Relay
2026-10-07 11:42   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-162338@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=filipp.dunsky@gmail.com \
    --cc=linux-serial@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox