From: sashiko-bot@kernel.org
To: "Sreeshankar K" <sreeshankar0910@gmail.com>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v11 2/5] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
Date: Fri, 16 Oct 2026 04:40:46 +0000 [thread overview]
Message-ID: <sashiko-outbox-173795@kernel.org> (raw)
In-Reply-To: <20261016042432.824-3-sreeshankar0910@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] clk: qcom: Incorrect source enum in freq_tbl causes cpuss_ahb_clk_src rate setting failure
--
commit 457d324324dea631af01284e949d55a40199a579
Author: Sreeshankar K <sreeshankar0910@gmail.com>
clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
Add support for the global clock controller found on SM7250
based devices.
> diff --git a/drivers/clk/qcom/gcc-sm7250.c b/drivers/clk/qcom/gcc-sm7250.c
> new file mode 100644
> --- /dev/null
> +++ b/drivers/clk/qcom/gcc-sm7250.c
[ ... ]
> +static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
> + F(19200000, DT_BI_TCXO_AO, 1, 0, 0),
> + { }
> +};
> +
> +static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
> + .cmd_rcgr = 0x48010,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = gcc_parent_map_0,
> + .freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
> + .clkr.hw.init = &(const struct clk_init_data){
> + .name = "gcc_cpuss_ahb_clk_src",
> + .parent_data = gcc_parent_data_0_ao,
> + .num_parents = ARRAY_SIZE(gcc_parent_data_0_ao),
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_rcg2_ops,
> + },
> +};
[Severity: High]
Will this cause a rate setting failure for gcc_cpuss_ahb_clk_src?
The frequency table ftbl_gcc_cpuss_ahb_clk_src uses the device tree index
DT_BI_TCXO_AO (which evaluates to 1) instead of the internal hardware parent
macro P_BI_TCXO (which evaluates to 0).
The associated clock gcc_cpuss_ahb_clk_src restricts its num_parents to 1
via gcc_parent_data_0_ao, and uses gcc_parent_map_0 as its parent map.
During a rate change, the common clock framework invokes qcom_find_src_index()
which iterates up to num_parents (1) and checks if the requested source
matches map[0].src (P_BI_TCXO = 0).
Since 1 != 0, the lookup fails and returns -ENOENT, preventing rate
configuration on the CPUSS AHB clock. Should the frequency table use
P_BI_TCXO instead?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261016042432.824-1-sreeshankar0910@gmail.com?part=2
next prev parent reply other threads:[~2026-10-16 4:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 4:24 [PATCH v11 0/5] Add initial support for Qualcomm SM7250 SoC Sreeshankar K
2026-10-16 4:24 ` [PATCH v11 1/5] dt-bindings: clock: Add SM7250 global clock controller Sreeshankar K
2026-10-16 4:24 ` [PATCH v11 2/5] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250 Sreeshankar K
2026-10-16 4:40 ` sashiko-bot [this message]
2026-10-16 4:24 ` [PATCH v11 3/5] dt-bindings: firmware: qcom,scm: Document SM7250 SCM Sreeshankar K
2026-10-16 4:24 ` [PATCH v11 4/5] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware Sreeshankar K
2026-10-16 4:32 ` sashiko-bot
2026-10-16 4:24 ` [PATCH v11 5/5] arm64: dts: qcom: Add SM7250 devicetree file Sreeshankar K
2026-10-16 4:41 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-173795@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=sreeshankar0910@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox