Devicetree
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Nicolae-Daniel Deaconescu" <Nicolae-daniel.Deaconescu@analog.com>
Cc: devicetree@vger.kernel.org, robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: iio: adc: add lltc,ltc2387
Date: Tue, 27 Oct 2026 13:59:37 +0000	[thread overview]
Message-ID: <sashiko-outbox-186677@kernel.org> (raw)
In-Reply-To: <20261027134409.76824-2-Nicolae-daniel.Deaconescu@analog.com>

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [Medium] dt-bindings: iio: adc: conflicting uint32 type for adi,gain-milli
- [Medium] dt-bindings: iio: adc: lltc,ltc2387: undocumented synthetic -x4 compatibles
- [Low] dt-bindings: iio: adc: lltc,ltc2387: example indentation and property order
--

commit 3bc833c852704e956c19734cf54a047dca662012
Author: Sergiu Cuciurean <sergiu.cuciurean@analog.com>

dt-bindings: iio: adc: add lltc,ltc2387

This commit adds devicetree bindings for the Linear Technology LTC2387-16
and LTC2387-18 SAR ADCs as well as the Analog Devices ADAQ23875, ADAQ23876,
and ADAQ23878 uModule ADCs.

> diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2387.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2387.yaml
> new file mode 100644
> index 0000000000000..f912260c8f790
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2387.yaml
> @@ -0,0 +1,138 @@

[ ... ]

> +properties:
> +  compatible:
> +    enum:
> +      - adi,adaq23875
> +      - adi,adaq23876
> +      - adi,adaq23878
> +      - lltc,ltc2387-16
> +      - lltc,ltc2387-16-x4
> +      - lltc,ltc2387-18
> +      - lltc,ltc2387-18-x4

[Severity: Medium]
Are lltc,ltc2387-16-x4 and lltc,ltc2387-18-x4 actual IC part numbers, or do
they represent a board/FPGA topology where four discrete LTC2387 chips share
conversion and clock signals and have their samples packed together by an AXI
ADC core?

The LTC2387-16 and LTC2387-18 are single-channel SAR ADCs, and neither the
commit message nor the binding description documents these -x4 compatible
strings. Should multi-chip board or FPGA topologies be described using
standard devicetree properties rather than encoding a chip count into
synthetic compatible strings?

[ ... ]

> +  adi,gain-milli:
> +    description:
> +      Gain of the fully-differential amplifier that the ADAQ2387x modules
> +      integrate ahead of the LTC2387 die, expressed as gain * 1000. It is
> +      fixed on the ADAQ23875 and set by pin strapping on the ADAQ23876 and
> +      ADAQ23878, so it must match the board. The bare ltc2387-* parts have
> +      no amplifier.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [370, 730, 870, 1380, 2000, 2250]

[Severity: Medium]
Does defining adi,gain-milli with $ref: /schemas/types.yaml#/definitions/uint32
cause a property type conflict with existing Analog Devices ADC bindings?

In Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml and
Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml, adi,gain-milli is
already defined as uint16:

  adi,gain-milli:
    ...
    $ref: /schemas/types.yaml#/definitions/uint16

Because vendor properties share a global type namespace across schemas in
dtschema, shouldn't adi,gain-milli use /schemas/types.yaml#/definitions/uint16
here (and /bits/ 16 <870> in the example below) to avoid a dt_binding_check
conflict and keep the devicetree ABI consistent across ADI ADC bindings?

[ ... ]

> +examples:
> +  - |
> +    adc {
> +            compatible = "lltc,ltc2387-16";
> +            clocks = <&clk 0>;
> +            io-backends = <&axi_adc>;
> +            pwms = <&pwm 0 0>, <&pwm 1 0>;
> +            pwm-names = "cnv", "clk_gate";
> +            vref-supply = <&vref>;
> +    };
> +  - |
> +    adc {
> +            compatible = "adi,adaq23878";
> +            clocks = <&clk 0>;
> +            io-backends = <&axi_adc>;
> +            pwms = <&pwm 0 0>, <&pwm 1 0>;
> +            pwm-names = "cnv", "clk_gate";
> +            vref-supply = <&vref>;
> +            adi,use-two-lanes;
> +            adi,gain-milli = <870>;
> +    };

[Severity: Low]
This isn't a bug, but both examples indent the properties inside the adc node
by 8 spaces instead of 4 spaces, and the second example places
adi,use-two-lanes before adi,gain-milli instead of in alphabetical order
within the vendor-specific property group, which triggers warnings from
scripts/dtc/dt-check-style --mode=strict.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261027134409.76824-1-Nicolae-daniel.Deaconescu@analog.com?part=1

  reply	other threads:[~2026-10-27 13:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-27 13:44 [PATCH 0/2] iio: adc: add LTC2387 and ADAQ2387x support Nicolae-Daniel Deaconescu
2026-10-27 13:44 ` [PATCH 1/2] dt-bindings: iio: adc: add lltc,ltc2387 Nicolae-Daniel Deaconescu
2026-10-27 13:59   ` sashiko-bot [this message]
2026-10-27 18:28   ` Conor Dooley
2026-10-27 13:44 ` [PATCH 2/2] iio: adc: add ltc2387 driver Nicolae-Daniel Deaconescu
2026-10-27 14:06   ` sashiko-bot
2026-10-27 14:37   ` Joshua Crofts
2026-10-28  2:39   ` Jonathan Cameron
2026-10-27 15:56 ` [PATCH 0/2] iio: adc: add LTC2387 and ADAQ2387x support Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-186677@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Nicolae-daniel.Deaconescu@analog.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox