From: sashiko-bot@kernel.org
To: "Ben Grisdale" <bengris32@protonmail.ch>
Cc: devicetree@vger.kernel.org, linux-serial@vger.kernel.org,
robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v2 6/6] arm64: dts: mediatek: Add Amazon Echo Dot (2016)
Date: Thu, 05 Nov 2026 14:38:41 +0000 [thread overview]
Message-ID: <sashiko-outbox-199255@kernel.org> (raw)
In-Reply-To: <20261105-arm64-initial-support-for-mediatek-mt8163-soc-v2-6-e68d7d428f99@protonmail.ch>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] arm64: dts: mediatek: unmatched mediatek,mt8163-wdt compatible in mt8163.dtsi
--
commit 1dcf4259a2a7c0a8d0a32ef9d20a66f3c078542e
Author: Ben Grisdale <bengris32@protonmail.ch>
arm64: dts: mediatek: Add Amazon Echo Dot (2016)
This commit adds a device tree for the Amazon Echo Dot (2nd generation, 2016),
codenamed "biscuit", based on the MediaTek MT8163 SoC, and enables building
mt8163-amazon-biscuit.dtb.
> diff --git a/arch/arm64/boot/dts/mediatek/mt8163-amazon-biscuit.dts b/arch/arm64/boot/dts/mediatek/mt8163-amazon-biscuit.dts
> new file mode 100644
> index 0000000000000..5fb5d59e4ed25
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8163-amazon-biscuit.dts
> @@ -0,0 +1,68 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/*
> + * Copyright (c) 2026 Ben Grisdale <bengris32@protonmail.ch>
> + */
> +
> +/dts-v1/;
> +#include "mt8163.dtsi"
[Severity: Medium]
Building mt8163-amazon-biscuit.dtb includes arch/arm64/boot/dts/mediatek/mt8163.dtsi,
which defines watchdog@10007000 without a fallback compatible:
arch/arm64/boot/dts/mediatek/mt8163.dtsi:
watchdog: watchdog@10007000 {
compatible = "mediatek,mt8163-wdt";
reg = <0 0x10007000 0 0x1000>;
interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_FALLING>;
#reset-cells = <1>;
};
However, mediatek,mt8163-wdt is not documented in
Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml, nor is it
present in mtk_wdt_dt_ids[] in drivers/watchdog/mtk_wdt.c:
drivers/watchdog/mtk_wdt.c:
static const struct of_device_id mtk_wdt_dt_ids[] = {
{ .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data },
{ .compatible = "mediatek,mt6589-wdt", .data = &mt6589_data },
...
Will this cause dtbs_check to fail on mt8163-amazon-biscuit.dtb and prevent
the MediaTek watchdog and TOPRGU reset controller driver from binding to
watchdog@10007000 at runtime? Should watchdog@10007000 in mt8163.dtsi include
a fallback compatible such as "mediatek,mt6589-wdt" (along with the binding
update), or should mediatek,mt8163-wdt be added to the binding and driver?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261105-arm64-initial-support-for-mediatek-mt8163-soc-v2-0-e68d7d428f99@protonmail.ch?part=6
prev parent reply other threads:[~2026-11-05 14:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 14:28 [PATCH v2 0/6] arm64: Initial support for MediaTek MT8163 SoC Ben Grisdale via B4 Relay
2026-11-05 14:28 ` [PATCH v2 1/6] dt-bindings: arm: mediatek: Add MT8163 Amazon Echo Dot (2016) Ben Grisdale via B4 Relay
2026-11-05 14:28 ` [PATCH v2 2/6] dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Add MT8163 Ben Grisdale via B4 Relay
2026-11-05 14:28 ` [PATCH v2 3/6] dt-bindings: timer: mediatek,timer: " Ben Grisdale via B4 Relay
2026-11-05 14:28 ` [PATCH v2 4/6] dt-bindings: serial: mediatek,uart: " Ben Grisdale via B4 Relay
2026-11-05 14:28 ` [PATCH v2 5/6] arm64: dts: mediatek: Add basic support for MT8163 SoC Ben Grisdale via B4 Relay
2026-11-05 14:43 ` sashiko-bot
2026-11-05 14:28 ` [PATCH v2 6/6] arm64: dts: mediatek: Add Amazon Echo Dot (2016) Ben Grisdale via B4 Relay
2026-11-05 14:38 ` sashiko-bot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-199255@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=bengris32@protonmail.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox