From: sashiko-bot@kernel.org
To: "Louis-Alexis Eyraud" <louisalexis.eyraud@collabora.com>
Cc: devicetree@vger.kernel.org, robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH net-next v5 06/10] net: stmmac: mediatek: use standard internal delay properties
Date: Wed, 11 Nov 2026 12:09:15 +0000 [thread overview]
Message-ID: <sashiko-outbox-208947@kernel.org> (raw)
In-Reply-To: <20261110-dwmac-mediatek-mt8189-v5-6-7d99d6292962@collabora.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] net: stmmac: mediatek: off-by-one RGMII cap in
mediatek_dwmac_config_dt()
--
commit 67e9a961803ad0d99ebf09bcf04f114dc90c181a
Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
net: stmmac: mediatek: use standard internal delay properties
This commit adds support for the standard rx-internal-delay-ps and
tx-internal-delay-ps Device Tree properties for RGMII internal clock
delays, falling back to the vendor delay properties when the standard ones
are absent.
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> index cda3f3edde39f..ee43d694099bd 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
[ ... ]
> @@ -427,24 +432,58 @@ static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat)
> return PTR_ERR(plat->peri_regmap);
> }
>
> - if (!of_property_read_u32(plat->np, "mediatek,tx-delay-ps", &tx_delay_ps)) {
> - if (tx_delay_ps < plat->variant->tx_delay_max) {
> - mac_delay->tx_delay = tx_delay_ps;
> - } else {
> - dev_err(plat->dev, "Invalid TX clock delay: %dps\n", tx_delay_ps);
> + of_property_read_u32(plat->np, "mediatek,tx-delay-ps", &tx_delay_ps);
> + if (tx_delay_ps >= plat->variant->mii_delay_max) {
> + dev_err(plat->dev, "Invalid TX clock delay: %dps\n",
> + tx_delay_ps);
> + return -EINVAL;
> + }
> +
> + /* Read RGMII TX internal delay standard property */
> + if (!of_property_read_u32(plat->np, "tx-internal-delay-ps",
> + &rgmii_tx_delay_ps)) {
> + if (rgmii_tx_delay_ps >= plat->variant->rgmii_delay_max) {
> + dev_err(plat->dev, "Invalid RGMII TX clock delay: %dps\n",
> + rgmii_tx_delay_ps);
> return -EINVAL;
> }
> + } else {
> + /*
> + * standard property value not available, fallback on vendor
> + * value instead and cap it to max RGMII delay value
> + */
> + rgmii_tx_delay_ps = min(tx_delay_ps,
> + plat->variant->rgmii_delay_max);
> }
>
> - if (!of_property_read_u32(plat->np, "mediatek,rx-delay-ps", &rx_delay_ps)) {
> - if (rx_delay_ps < plat->variant->rx_delay_max) {
> - mac_delay->rx_delay = rx_delay_ps;
> - } else {
> - dev_err(plat->dev, "Invalid RX clock delay: %dps\n", rx_delay_ps);
> + of_property_read_u32(plat->np, "mediatek,rx-delay-ps", &rx_delay_ps);
> + if (rx_delay_ps >= plat->variant->mii_delay_max) {
> + dev_err(plat->dev, "Invalid RX clock delay: %dps\n",
> + rx_delay_ps);
> + return -EINVAL;
> + }
> +
> + /* Read RGMII RX internal delay standard property */
> + if (!of_property_read_u32(plat->np, "rx-internal-delay-ps",
> + &rgmii_rx_delay_ps)) {
> + if (rgmii_rx_delay_ps >= plat->variant->rgmii_delay_max) {
> + dev_err(plat->dev, "Invalid RGMII RX clock delay: %dps\n",
> + rgmii_rx_delay_ps);
> return -EINVAL;
> }
> + } else {
> + /*
> + * standard property value not available, fallback on vendor
> + * value instead and cap it to max RGMII delay value
> + */
> + rgmii_rx_delay_ps = min(rx_delay_ps,
> + plat->variant->rgmii_delay_max);
> }
[Severity: Medium]
Can capping rgmii_tx_delay_ps and rgmii_rx_delay_ps to
plat->variant->rgmii_delay_max overflow the 5-bit stage fields in
mt2712_set_delay()?
rgmii_delay_max is an exclusive upper bound (5440 on MT2712, or 32 * 170ps).
When a fallback vendor delay in [5440, 17599] ps is clamped to 5440,
dividing by MT2712_RGMII_DLY_STAGE_DIV yields stage 32 (0x20), which
FIELD_PREP() truncates to stage 0 in ETH_DLY_GTXC_STAGES and
ETH_DLY_RXC_STAGES instead of clamping to stage 31 (for example via
plat->variant->rgmii_delay_max - 1).
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261110-dwmac-mediatek-mt8189-v5-0-7d99d6292962@collabora.com?part=6
next prev parent reply other threads:[~2026-11-11 12:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 12:08 [PATCH net-next v5 00/10] net/stmmac: Add Mediatek MT8189 support Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 01/10] dt-bindings: net: mediatek-dwmac: fix unit in rx/tx delay property description Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 02/10] dt-bindings: net: mediatek-dwmac: deprecate rx/tx delay vendor properties Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 03/10] dt-bindings: net: mediatek-dwmac: add support for MT8189 SoC Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 04/10] net: stmmac: mediatek: simplify TX/RX delay handling in mt8195_set_delay Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 05/10] net: stmmac: mediatek: simplify TX/RX delay handling in mt2712_set_delay Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 06/10] net: stmmac: mediatek: use standard internal delay properties Louis-Alexis Eyraud
2026-11-11 12:09 ` sashiko-bot [this message]
2026-11-10 12:08 ` [PATCH net-next v5 07/10] net: stmmac: mediatek: add RX/TX delay stage divider in platform data Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 08/10] net: stmmac: mediatek: add PERI_ETH_CTRLx register offset " Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 09/10] net: stmmac: mediatek: add support for TX clock output enable feature Louis-Alexis Eyraud
2026-11-10 12:08 ` [PATCH net-next v5 10/10] net: stmmac: mediatek: add support for MT8189 SoC Louis-Alexis Eyraud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-208947@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=louisalexis.eyraud@collabora.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox