Devicetree
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Armandas Kvietkus" <armandas.kvietkus@proton.me>
Cc: devicetree@vger.kernel.org, robh@kernel.org, conor+dt@kernel.org,
	media-ci@linuxtv.org
Subject: Re: [PATCH v5 2/2] media: i2c: Add Samsung S5K3T2 image sensor driver
Date: Tue, 17 Nov 2026 20:48:56 +0000	[thread overview]
Message-ID: <sashiko-outbox-219647@kernel.org> (raw)
In-Reply-To: <20261117-upstream-s5k3t2-v5-2-1f7f5fde9e2a@proton.me>

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] media: i2c: s5k3t2: update pad format code on flip in
  s5k3t2_set_ctrl()
--

commit 1494222806e207d51c67e719677f2ad981aa484e
Author: Armandas Kvietkus <armandas.kvietkus@proton.me>

media: i2c: Add Samsung S5K3T2 image sensor driver

This commit adds a V4L2 subdevice driver for the Samsung S5K3T2 20MP CMOS
image sensor.

> diff --git a/drivers/media/i2c/s5k3t2.c b/drivers/media/i2c/s5k3t2.c
> new file mode 100644
> index 0000000000000..1e504bf5fa24e
> --- /dev/null
> +++ b/drivers/media/i2c/s5k3t2.c
[ ... ]
> +static int s5k3t2_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct s5k3t2 *s5k3t2 = container_of_const(ctrl->handler, struct s5k3t2,
> +						   ctrl_handler);
> +	const struct v4l2_mbus_framefmt *fmt;
> +	struct v4l2_subdev_state *state;
> +	s64 exposure_max, exposure_def;
> +	int ret;
> +
> +	state = v4l2_subdev_get_locked_active_state(&s5k3t2->sd);
> +	fmt = v4l2_subdev_state_get_format(state, 0);
> +
> +	if (ctrl->id == V4L2_CID_VBLANK) {
> +		exposure_max = fmt->height + ctrl->val - S5K3T2_EXPOSURE_MARGIN;
> +		exposure_def = min(s5k3t2->exposure->default_value,
> +				   exposure_max);
> +		ret = __v4l2_ctrl_modify_range(s5k3t2->exposure,
> +					       s5k3t2->exposure->minimum,
> +					       exposure_max,
> +					       s5k3t2->exposure->step,
> +					       exposure_def);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	if (!pm_runtime_get_if_active(s5k3t2->dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
[ ... ]
> +	case V4L2_CID_HFLIP:
> +		ret = cci_write(s5k3t2->regmap, S5K3T2_REG_ORIENTATION,
> +				(s5k3t2->hflip->val ? S5K3T2_HFLIP : 0) |
> +				(s5k3t2->vflip->val ? S5K3T2_VFLIP : 0), NULL);
> +		break;

[Severity: Medium]
Should s5k3t2_set_ctrl() also update fmt->code =
s5k3t2_get_format_code(s5k3t2) before the pm_runtime_get_if_active() check
when ctrl->id == V4L2_CID_HFLIP?

Both s5k3t2->hflip and s5k3t2->vflip advertise V4L2_CTRL_FLAG_MODIFY_LAYOUT
and change the Bayer order returned by s5k3t2_get_format_code(), while
s5k3t2_pad_ops uses v4l2_subdev_get_fmt() for .get_fmt.  Without updating
fmt->code in the active subdev state when the flip controls change,
VIDIOC_SUBDEV_G_FMT and media link validation see a stale media bus format
code unless userspace calls VIDIOC_SUBDEV_S_FMT again.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261117-upstream-s5k3t2-v5-0-1f7f5fde9e2a@proton.me?part=2

      reply	other threads:[~2026-11-17 20:48 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 20:20 [PATCH v5 0/2] media: i2c: Samsung S5K3T2 image sensor Armandas Kvietkus via B4 Relay
2026-11-17 20:20 ` [PATCH v5 1/2] dt-bindings: media: i2c: Add " Armandas Kvietkus via B4 Relay
2026-11-17 20:20 ` [PATCH v5 2/2] media: i2c: Add Samsung S5K3T2 image sensor driver Armandas Kvietkus via B4 Relay
2026-11-17 20:48   ` sashiko-bot [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-219647@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=armandas.kvietkus@proton.me \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=media-ci@linuxtv.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox