From: sashiko-bot@kernel.org
To: "Prakriti Sharma" <Prakriti.Sharma@synopsys.com>
Cc: devicetree@vger.kernel.org, robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH 5/6] dt-bindings: spi: Document DWC SSI XIP properties
Date: Thu, 19 Nov 2026 10:14:15 +0000 [thread overview]
Message-ID: <sashiko-outbox-222929@kernel.org> (raw)
In-Reply-To: <20261119100513.433044-6-prakriti@synopsys.com>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Medium] dt-bindings: spi: snps,dwc-ssi-2.02a: XIP properties encode
OS policy
- [Low] dt-bindings: spi: snps,dwc-ssi-2.02a: missing reg items and XIP
dependencies
--
commit ea2effa98a511e888bf97a068c9c5ac14822f4eb
Author: Prakriti Sharma <Prakriti.Sharma@synopsys.com>
dt-bindings: spi: Document DWC SSI XIP properties
This commit documents an optional XIP memory region and boolean properties
for execute-in-place, continuous mode, and prefetch in the Synopsys DWC SSI
v2.02a binding.
> diff --git a/Documentation/devicetree/bindings/spi/snps,dwc-ssi-2.02a.yaml b/Documentation/devicetree/bindings/spi/snps,dwc-ssi-2.02a.yaml
> index 7cccd627f8095..efbeb59313fa3 100644
> --- a/Documentation/devicetree/bindings/spi/snps,dwc-ssi-2.02a.yaml
> +++ b/Documentation/devicetree/bindings/spi/snps,dwc-ssi-2.02a.yaml
> @@ -23,7 +23,18 @@ properties:
> const: snps,dwc-ssi-2.02a
>
> reg:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> + description: |
> + Controller register base and optional XIP memory region.
> + - First entry: SSI controller register space
> + - Second entry (optional): XIP memory-mapped region for direct flash access
> +
> + reg-names:
> + minItems: 1
> + items:
> + - const: ssi_base
> + - const: xip_mem
[Severity: Low]
Should reg use an items list with individual descriptions for each entry
(like clocks and dmas in this schema) instead of maxItems: 2 with a bulleted
description?
Also, although the snps,xip-enabled description states that it requires the
xip_mem entry in reg, the schema has no dependencies or allOf/if/then
constraint enforcing minItems: 2 on reg and reg-names when the XIP
properties are present, so dt_binding_check and dtbs_check will not catch a
missing xip_mem region.
> @@ -93,6 +104,48 @@ properties:
> of the designware controller, and the upper limit is also subject to
> controller configuration.
>
> + snps,xip-enabled:
> + type: boolean
> + description: |
> + Enable XIP (eXecute-In-Place) mode for direct memory-mapped access to
> + SPI flash. When enabled, the controller's XIP region is mapped into
> + CPU address space for zero-copy reads and writes. It requires the
> + xip_mem entry in reg.
> +
> + XIP is used only when this property is present and the module
> + parameter spi_dw_g2_mmio.xip_mode=1 is set. The default xip_mode=0
> + disables XIP. Runtime control is available through sysfs.
> +
> + snps,xip-continuous-mode:
> + type: boolean
> + description: |
> + Enable XIP continuous transfer mode. When enabled, the controller omits
> + the command byte on subsequent sequential reads from the same chip select,
> + saving 8 SPI clock cycles per access. This improves throughput for code
> + execution from XIP flash.
> +
> + Requirements:
> + - Flash device must support continuous read mode (e.g., Fast Read Quad
> + I/O with mode bits)
> + - Must use consistent command across all accesses
> + - Not compatible with mixed command types
> +
> + The controller automatically re-sends the command when CS is de-asserted
> + or transfer type changes.
> +
> + snps,xip-prefetch-mode:
> + type: boolean
> + description: |
> + Enable XIP hardware prefetch mode. The controller speculatively fetches
> + the next cache line when the current access completes, anticipating
> + sequential reads. This reduces latency for instruction fetches during
> + XIP code execution.
> +
> + Best for: Sequential code execution, linear data reads
> + Not ideal for: Random access patterns, small sporadic reads
> +
> + Prefetch is only active when XIP direct mapping is enabled.
[Severity: Medium]
Do snps,xip-enabled, snps,xip-continuous-mode, and snps,xip-prefetch-mode
encode OS and workload policy rather than hardware description?
Whether an XIP memory-mapped window exists is already described by the
xip_mem reg entry and the controller's capability registers;
snps,xip-enabled acts as a software policy switch and documents Linux-specific
module parameters (spi_dw_g2_mmio.xip_mode=1) and sysfs interfaces in the
binding. Similarly, snps,xip-continuous-mode depends on the attached flash
device and protocol layer rather than a static controller property, and
snps,xip-prefetch-mode describes workload tuning (sequential versus random
access patterns).
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261119100513.433044-1-prakriti@synopsys.com?part=5
next prev parent reply other threads:[~2026-11-19 10:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 10:05 [PATCH 0/6] spi: dw-g2: add Synopsys DWC SSI v2.02a controller support Prakriti Sharma
2026-11-19 10:05 ` [PATCH 1/6] dt-bindings: spi: Add Synopsys DWC SSI v2.02a binding Prakriti Sharma
2026-11-19 10:05 ` [PATCH 2/6] spi: dw-g2: Add Synopsys DWC SSI v2.02a driver Prakriti Sharma
2026-11-19 10:28 ` sashiko-bot
2026-11-19 10:05 ` [PATCH 3/6] spi: dw-g2: Add indirect read and write Prakriti Sharma
2026-11-19 10:27 ` sashiko-bot
2026-11-19 10:05 ` [PATCH 4/6] spi: dw-g2: Add SPI-NAND support Prakriti Sharma
2026-11-19 10:25 ` sashiko-bot
2026-11-19 10:05 ` [PATCH 5/6] dt-bindings: spi: Document DWC SSI XIP properties Prakriti Sharma
2026-11-19 10:14 ` sashiko-bot [this message]
2026-11-19 10:05 ` [PATCH 6/6] spi: dw-g2: Add XIP support Prakriti Sharma
2026-11-19 10:32 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-222929@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=Prakriti.Sharma@synopsys.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox