From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mirco Ellis" Subject: connect issue Date: Tue, 17 Jun 2003 11:45:50 +0200 Sender: linux-diald-owner@vger.kernel.org Message-ID: <010701c334b5$3ded6980$3697a8c0@MIRCO> Reply-To: "Mirco Ellis" Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-diald@vger.kernel.org Hi guys, I am a newbie to all this and desperately need some guidance. I am using diald 0.99.1. The problem I am having is that I can not get my connect script to work. I am using the one in /usr/lib/diald/ connect. To tell you the truth I have been trying all sorts of chat scripts but none of them seem to initiate the modem. I don't know what I am doing wrong. I have even used the init strings that minicom uses to initialize the modem, but no luck. Obviously if I can't get the chat script or connect script to initiate the modem I am stuck. I can however dial up with minicom and manually start pppd, so this proves to me that the modem is working. When I run the connect script ./connect all I get is the init string on the command line [root@.....]# ATQ0V1E1S0=0&C1&D2+FCLASS=0 That is where it stays for a minute or so and returns to the prompt. Am I missing something? I have read the man pages and howto's, but no luck. I see that there is nowhere in the connect script where it actually tells the chat program where to go look for the modem egg. DEVICE=ttyS0. I have tried all sorts of chat scripts but no luck. Can somebody please help me here. Thanking you in anticipation Mirco