From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rod <pikensullivan@yahoo.ca>
Subject: Re: How calls diald the pppd?
Date: Sat, 31 Aug 2002 10:46:22 -0400
Sender: linux-diald-owner@vger.kernel.org
Message-ID: <20020831144622.GA1438@pike.home>
References: <3D6E4E50.EF8B32F9@ba228.pppool.de> <20020829180501.GA1368@pike.home> <3D6E88B3.3878ACD9@ba228.pppool.de> <20020830172410.GA1338@pike.home> <3D6FC8B1.1C893FF6@ba228.pppool.de>
Mime-Version: 1.0
Return-path: <linux-diald-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <3D6FC8B1.1C893FF6@ba228.pppool.de>
List-Id: <linux-diald.vger.kernel.org>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-diald@vger.kernel.org

On Fri, Aug 30, 2002 at 09:34:09PM +0200, Juergen Kosel wrote:
> Rod wrote:
> > 
> > On Thu, Aug 29, 2002 at 10:48:51PM +0200, Juergen Kosel wrote:
> > 
> > Hallo Juergen,
> > 
> > > My machine is standalone (unless conecting to ISP)
> > > So the IP adresses are uniqe!
> > 
> > OK but in your diald.conf you have commented out the "remote" command.
> 
> This was a temporary attemp.
> Now I have inserted "remote 192.168.20.1" and "local 192.168.20.100"
> 
> > Perhaps you need to look at "man diald" and the references to "dynamic",
> > "remote", and "local".  "remote" and "local" should be unique and NOT
> > the address of your machine.  Also if you look at the info on the use of
> > "dynamic" it says that you must specify both a "local" and "remote"
> > address.
> 
> I specified both -> it doesn't work. Then I had omitted one/both -> it
> doesn't work...
> 
> > 
> > >
> > > And in pap secrets the remote and local adress field has an '*' as entry
> > > (match any) for the choosen name.
> > > So I have no idea why the ppp options ipcp-accept-local
> > > ipcp-accept-remote have no effect.
> > 
> > I don't use ipcp-accept-local and ipcp-accept-remote so I'm not sure
> > why you are using them. 
> 
> Because the pppd manual says with this option all remote/local adresses
> should be accepted.
> 
> > I don't use pppd-options in my diald.conf at
> > all.  I specify my pppd options in /etc/ppp/options.
> > Is there a reason why you are specifying pppd-options?
> 
> I still want to use different ppp options for dialout an dialin (with
> mgetty)
> 
> > What does your /etc/ppp/options file look like?
> 
> lock
> crtscts
> modem
> defaultroute
> asyncmap 0
> debug
> deflate 9,9
> bsdcomp 9,9
> show-password
> 
> > 
> > Have you been able to get pppd up and running without diald?
> 
> Yes with the above options.

What does the script for starting pppd running look like?

> 
> > 
> > What I did was debug pppd first, get that working and then use the same
> > connection script for diald.  I have a test-script as follows.
> > 
> > /usr/sbin/pppd /dev/modem 38400 modem crtscts noipdefault \
> > defaultroute connect "/usr/sbin/chat -v -f /etc/ppp/chat-script"
> 
> I don't have "noipdefault" in my option. But if I understand the manual
> right, this is for the local adress.
> I don't recommend 38400 as serial line speed. Use 115200 instead.
> Because if your modem establishes a V.34 connect with 33600 bit/second
> and 42bis compression, the serial line becomes the bottleneck otherwise!
> (Not to speek of a V.90 connect with 48000 bit/s)
> 
> 
> 
> 
> Juergen
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html