From: Rene <jopit@9online.fr>
To: diald <linux-diald@vger.kernel.org>
Subject: Diald dies on pppd
Date: Mon, 29 Apr 2002 19:39:48 +0200 [thread overview]
Message-ID: <3CCD8564.20804@9online.fr> (raw)
Hi,
I an trying to install diald on a debian distrubution. My ppp
configuration is OK si I think the problem is elsewhere.
here is my diald.options file
device /dev/ttyS0
accounting-log /var/log/diald.log
fifo /var/run/diald.fifo
debug 31
mode ppp
local 10.0.0.1
remote 10.0.0.2
dynamic
#pppd-options noauth nopersist
#two-way
reroute
defaultroute
connect "/usr/sbin/chat -v -f /etc/chatscripts/9online"
lock
modem
crtscts
connect-timeout 90
dial-fail-limit 0
died-retry-count 0
include /etc/diald/standard.filter
The chat script is the One I use for my pppd connect "pppd call 9online"
Her is my logfile
Apr 30 17:13:42 garn diald[813]: SIGCHLD[15]: pid 850 system, status 0
Apr 30 17:57:45 garn diald[886]: running '/sbin/ifconfig sl0 10.0.0.1
pointopoint 10.0.0.2 broadcast 0.0.0.0 netmask 255.255.255.255 metric 0
mtu 1500 up'
Apr 30 17:57:45 garn diald[886]: SIGCHLD[1]: pid 903 system, status 256
Apr 30 17:57:45 garn diald[886]: start sl0: Establishing routes for sl0
Apr 30 17:57:45 garn diald[886]: running '/sbin/route add 10.0.0.2
metric 0 dev sl0'
Apr 30 17:57:46 garn diald[886]: SIGCHLD[2]: pid 904 system, status 0
Apr 30 17:57:46 garn diald[886]: running '/sbin/route add default metric
0 netmask 0.0.0.0 dev sl0'
Apr 30 17:57:46 garn diald[886]: SIGCHLD[3]: pid 905 system, status 0
Apr 30 17:57:46 garn diald[886]: Changed snoop device to sl0
Apr 30 17:57:49 garn diald[886]: filter accepted rule 33 proto 134619992
len 84 packet 10.0.0.1,0 => 212.30.96.108,0
Apr 30 17:57:49 garn diald[886]: new state CONNECT action 0x8050dc0
timeout 90
Apr 30 17:57:50 garn diald[886]: running '/usr/sbin/chat -v -f
/etc/chatscripts/9online'
Apr 30 17:57:50 garn diald[886]: filter accepted rule 33 proto 134619992
len 84 packet 10.0.0.1,0 => 212.30.96.108,0
Apr 30 17:58:19 garn last message repeated 29 times
Apr 30 17:58:54 garn last message repeated 35 times
Apr 30 17:58:54 garn diald[886]: SIGCHLD[4]: pid 907 dial, status 0
Apr 30 17:58:54 garn diald[886]: new state START_LINK action 0x8051114
timeout 60
Apr 30 17:58:54 garn diald[913]: Running pppd: /usr/sbin/pppd
-defaultroute -detach modem crtscts mtu 1500 mru 1500
Apr 30 17:58:55 garn diald[886]: filter accepted rule 33 proto 134619992
len 84 packet 10.0.0.1,0 => 212.30.96.108,0
Apr 30 17:59:15 garn last message repeated 20 times
Apr 30 17:59:16 garn diald[886]: SIGCHLD[5]: pid 913 link, status 4096
Apr 30 17:59:16 garn diald[886]: running '/sbin/ifconfig sl0 10.0.0.1
pointopoint 10.0.0.2 broadcast 0.0.0.0 netmask 255.255.255.255 metric 0
mtu 1500 up'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[6]: pid 915 system, status 256
Apr 30 17:59:16 garn diald[886]: start sl0: Establishing routes for sl0
Apr 30 17:59:16 garn diald[886]: running '/sbin/route add 10.0.0.2
metric 0 dev sl0'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[7]: pid 916 system, status 1792
Apr 30 17:59:16 garn diald[886]: running '/sbin/route add default metric
0 netmask 0.0.0.0 dev sl0'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[8]: pid 917 system, status 1792
Apr 30 17:59:16 garn diald[886]: stop ppp0: Removing routes for ppp0
Apr 30 17:59:16 garn diald[886]: running '/sbin/route del default metric
0 netmask 0.0.0.0 dev ppp0'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[9]: pid 918 system, status 1792
Apr 30 17:59:16 garn diald[886]: running '/sbin/ifconfig ppp0 down'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[10]: pid 919 system, status 0
Apr 30 17:59:16 garn diald[886]: running '/sbin/ifconfig sl0 10.0.0.1
pointopoint 10.0.0.2 broadcast 0.0.0.0 netmask 255.255.255.255 metric 0
mtu 1500 up'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[11]: pid 920 system, status 256
Apr 30 17:59:16 garn diald[886]: start sl0: Establishing routes for sl0
Apr 30 17:59:16 garn diald[886]: running '/sbin/route add 10.0.0.2
metric 0 dev sl0'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[12]: pid 921 system, status 1792
Apr 30 17:59:16 garn diald[886]: running '/sbin/route add default metric
0 netmask 0.0.0.0 dev sl0'
Apr 30 17:59:16 garn diald[886]: SIGCHLD[13]: pid 922 system, status 1792
Apr 30 17:59:16 garn diald[886]: new state DISCONNECT action 0x8051558
timeout 60
Apr 30 17:59:16 garn diald[886]: filter accepted rule 33 proto 134619992
len 84 packet 10.0.0.1,0 => 212.30.96.108,0
Apr 30 17:59:16 garn diald[886]: new state CLOSE action 0x80515ec timeout -1
Apr 30 17:59:17 garn diald[886]: filter accepted rule 33 proto 134619992
len 84 packet 10.0.0.1,0 => 212.30.96.108,0
Apr 30 17:59:43 garn last message repeated 26 times
Apr 30 17:59:46 garn diald[886]: new state RETRY action 0x8051780 timeout -1
Apr 30 17:59:47 garn diald[886]: new state DOWN action 0x8050cf8 timeout -1
Apr 30 17:59:48 garn diald[886]: new state CONNECT action 0x8050dc0
timeout 90
Apr 30 17:59:49 garn diald[886]: running '/usr/sbin/chat -v -f
/etc/chatscripts/9online'
Apr 30 17:59:49 garn diald[886]: SIGCHLD[14]: pid 928 dial, status 2
Apr 30 17:59:50 garn diald[886]: stop sl0: Removing routes for sl0
Apr 30 17:59:50 garn diald[886]: running '/sbin/route del default metric
0 netmask 0.0.0.0 dev sl0'
Apr 30 17:59:50 garn diald[886]: SIGCHLD[15]: pid 929 system, status 0
Apr 30 17:59:50 garn diald[886]: running '/sbin/ifconfig sl0 down'
Apr 30 17:59:50 garn diald[886]: SIGCHLD[16]: pid 930 system, status 0
Thank for your help
René
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2002-04-29 17:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-29 17:39 Rene [this message]
2002-05-09 20:09 ` Diald dies on pppd Mike Jagdis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CCD8564.20804@9online.fr \
--to=jopit@9online.fr \
--cc=linux-diald@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).