Re: [PATCH v3 10/25] cxl/port: Add endpoint decoder DC mode support to sysfs

[Dave Jiang <dave.jiang@intel.com>]

On 8/16/24 7:44 AM, ira.weiny@intel.com wrote:
> From: Navneet Singh <navneet.singh@intel.com>
> 
> Endpoint decoder mode is used to represent the partition the decoder
> points to such as ram or pmem.
> 
> Expand the mode to allow a decoder to point to a specific DC partition
> (Region).
> 
> Signed-off-by: Navneet Singh <navneet.singh@intel.com>
> Co-developed-by: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> 
> ---
> Changes:
> [Fan: change mode range logic]
> [Fan: use !resource_size()]
> [djiang: use the static mode name string array in mode_store()]
> [Jonathan: remove rc check from mode to region index]
> [Jonathan: clarify decoder mode 'mixed']
> [djbw: drop cleanup patch and just follow the convention in cxl_dpa_set_mode()]
> [fan: make dcd resource size check similar to other partitions]
> [djbw, jonathan, fan: remove mode range check from dc_mode_to_region_index]
> [iweiny: push sysfs versions to 6.12]
> ---
>  Documentation/ABI/testing/sysfs-bus-cxl | 21 ++++++++++----------
>  drivers/cxl/core/hdm.c                  | 10 ++++++++++
>  drivers/cxl/core/port.c                 | 10 +++++-----
>  drivers/cxl/cxl.h                       | 35 ++++++++++++++++++---------------
>  4 files changed, 45 insertions(+), 31 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
> index 3f5627a1210a..957717264709 100644
> --- a/Documentation/ABI/testing/sysfs-bus-cxl
> +++ b/Documentation/ABI/testing/sysfs-bus-cxl
> @@ -316,23 +316,24 @@ Description:
>  
>  
>  What:		/sys/bus/cxl/devices/decoderX.Y/mode
> -Date:		May, 2022
> -KernelVersion:	v6.0
> +Date:		May, 2022, October 2024
> +KernelVersion:	v6.0, v6.12 (dcY)
>  Contact:	linux-cxl@vger.kernel.org
>  Description:
>  		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
>  		translates from a host physical address range, to a device local
>  		address range. Device-local address ranges are further split
> -		into a 'ram' (volatile memory) range and 'pmem' (persistent
> -		memory) range. The 'mode' attribute emits one of 'ram', 'pmem',
> -		'mixed', or 'none'. The 'mixed' indication is for error cases
> -		when a decoder straddles the volatile/persistent partition
> -		boundary, and 'none' indicates the decoder is not actively
> -		decoding, or no DPA allocation policy has been set.
> +		into a 'ram' (volatile memory) range, 'pmem' (persistent
> +		memory) range, or Dynamic Capacity (DC) range. The 'mode'
> +		attribute emits one of 'ram', 'pmem', 'dcY', 'mixed', or
> +		'none'. The 'mixed' indication is for error cases when a
> +		decoder straddles partition boundaries, and 'none' indicates
> +		the decoder is not actively decoding, or no DPA allocation
> +		policy has been set.
>  
>  		'mode' can be written, when the decoder is in the 'disabled'
> -		state, with either 'ram' or 'pmem' to set the boundaries for the
> -		next allocation.
> +		state, with 'ram', 'pmem', or 'dcY' to set the boundaries for
> +		the next allocation.
>  
>  
>  What:		/sys/bus/cxl/devices/decoderX.Y/dpa_resource
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index b4a517c6d283..ceca0b3d3e5c 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -551,6 +551,7 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
>  	switch (mode) {
>  	case CXL_DECODER_RAM:
>  	case CXL_DECODER_PMEM:
> +	case CXL_DECODER_DC0 ... CXL_DECODER_DC7:
>  		break;
>  	default:
>  		dev_dbg(dev, "unsupported mode: %d\n", mode);
> @@ -578,6 +579,15 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
>  		goto out;
>  	}
>  
> +	if (mode >= CXL_DECODER_DC0 && mode <= CXL_DECODER_DC7) {
> +		rc = dc_mode_to_region_index(mode);
> +		if (!resource_size(&cxlds->dc_res[rc])) {
> +			dev_dbg(dev, "no available dynamic capacity\n");
> +			rc = -ENXIO;
> +			goto out;
> +		}
> +	}
> +
>  	cxled->mode = mode;
>  	rc = 0;
>  out:
> diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
> index 8054cbaac9f6..222aa0aeeef7 100644
> --- a/drivers/cxl/core/port.c
> +++ b/drivers/cxl/core/port.c
> @@ -205,11 +205,11 @@ static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
>  	enum cxl_decoder_mode mode;
>  	ssize_t rc;
>  
> -	if (sysfs_streq(buf, "pmem"))
> -		mode = CXL_DECODER_PMEM;
> -	else if (sysfs_streq(buf, "ram"))
> -		mode = CXL_DECODER_RAM;
> -	else
> +	for (mode = CXL_DECODER_RAM; mode < CXL_DECODER_MIXED; mode++)
> +		if (sysfs_streq(buf, cxl_decoder_mode_names[mode]))
> +			break;
> +
> +	if (mode >= CXL_DECODER_MIXED)
>  		return -EINVAL;
>  
>  	rc = cxl_dpa_set_mode(cxled, mode);
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index 53b666ef4097..16861c867537 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -365,6 +365,9 @@ struct cxl_decoder {
>  /*
>   * CXL_DECODER_DEAD prevents endpoints from being reattached to regions
>   * while cxld_unregister() is running
> + *
> + * NOTE: CXL_DECODER_RAM must be second and CXL_DECODER_MIXED must be last.
> + *	 See mode_store()
>   */
>  enum cxl_decoder_mode {
>  	CXL_DECODER_NONE,
> @@ -382,25 +385,25 @@ enum cxl_decoder_mode {
>  	CXL_DECODER_DEAD,
>  };
>  
> +static const char * const cxl_decoder_mode_names[] = {
> +	[CXL_DECODER_NONE] = "none",
> +	[CXL_DECODER_RAM] = "ram",
> +	[CXL_DECODER_PMEM] = "pmem",
> +	[CXL_DECODER_DC0] = "dc0",
> +	[CXL_DECODER_DC1] = "dc1",
> +	[CXL_DECODER_DC2] = "dc2",
> +	[CXL_DECODER_DC3] = "dc3",
> +	[CXL_DECODER_DC4] = "dc4",
> +	[CXL_DECODER_DC5] = "dc5",
> +	[CXL_DECODER_DC6] = "dc6",
> +	[CXL_DECODER_DC7] = "dc7",
> +	[CXL_DECODER_MIXED] = "mixed",
> +};
> +
>  static inline const char *cxl_decoder_mode_name(enum cxl_decoder_mode mode)
>  {
> -	static const char * const names[] = {
> -		[CXL_DECODER_NONE] = "none",
> -		[CXL_DECODER_RAM] = "ram",
> -		[CXL_DECODER_PMEM] = "pmem",
> -		[CXL_DECODER_DC0] = "dc0",
> -		[CXL_DECODER_DC1] = "dc1",
> -		[CXL_DECODER_DC2] = "dc2",
> -		[CXL_DECODER_DC3] = "dc3",
> -		[CXL_DECODER_DC4] = "dc4",
> -		[CXL_DECODER_DC5] = "dc5",
> -		[CXL_DECODER_DC6] = "dc6",
> -		[CXL_DECODER_DC7] = "dc7",
> -		[CXL_DECODER_MIXED] = "mixed",
> -	};
> -
>  	if (mode >= CXL_DECODER_NONE && mode <= CXL_DECODER_MIXED)
> -		return names[mode];
> +		return cxl_decoder_mode_names[mode];
>  	return "mixed";
>  }
>  
>