From: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
To: bhelgaas@google.com, lorenzo.pieralisi@arm.com,
Joao.Pinto@synopsys.com, jingoohan1@gmail.com, kishon@ti.com,
adouglas@cadence.com, jesper.nilsson@axis.com,
shawn.lin@rock-chips.com
Cc: linux-pci@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, dFrom@synopsys.com,
d58689de99704f74c2eb4cf4ca0d62ea2efa36f8@synopsys.com,
Mon@synopsys.com, Sep@synopsys.com, 17@synopsys.com,
"00:00:00"@synopsys.com, 2001@synopsys.com,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Subject: [PATCH v7 03/11] PCI: dwc: Add MSI-X callbacks handler
Date: Fri, 6 Jul 2018 14:26:16 +0100 [thread overview]
Message-ID: <1530883586-8395-1-git-send-email-gustavo.pimentel@synopsys.com> (raw)
In-Reply-To: <cover.1530877028.git.gustavo.pimentel@synopsys.com>
Remove duplicate defines located on pcie-designware.h file already
available on /include/uapi/linux/pci-regs.h file.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
Change v1->v2:
- Nothing changed, just to follow the patch set version.
Change v2->v3:
- Replaced wrong return value 0 to -EINVAL.
Change v3->v4:
- Rebased to Lorenzo's master branch v4.18-rc1.
Change v4->v5:
- Moved pci_epc_set_msi maximum interrupts validation into a new patch
file #11.
Change v5->v6:
- Nothing changed, just to follow the patch set version.
Change v6->v7:
- Nothing changed, just to follow the patch set version.
drivers/pci/controller/dwc/pcie-designware-ep.c | 49 +++++++++++++++++--------
drivers/pci/controller/dwc/pcie-designware.h | 11 ------
2 files changed, 33 insertions(+), 27 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index bbe75d7..1f98db3 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -246,29 +246,38 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no,
static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no)
{
- int val;
struct dw_pcie_ep *ep = epc_get_drvdata(epc);
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ u32 val, reg;
+
+ if (!ep->msi_cap)
+ return -EINVAL;
- val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
- if (!(val & MSI_CAP_MSI_EN_MASK))
+ reg = ep->msi_cap + PCI_MSI_FLAGS;
+ val = dw_pcie_readw_dbi(pci, reg);
+ if (!(val & PCI_MSI_FLAGS_ENABLE))
return -EINVAL;
- val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
+ val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
+
return val;
}
-static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 encode_int)
+static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
{
- int val;
struct dw_pcie_ep *ep = epc_get_drvdata(epc);
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ u32 val, reg;
- val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
- val &= ~MSI_CAP_MMC_MASK;
- val |= (encode_int << MSI_CAP_MMC_SHIFT) & MSI_CAP_MMC_MASK;
+ if (!ep->msi_cap)
+ return -EINVAL;
+
+ reg = ep->msi_cap + PCI_MSI_FLAGS;
+ val = dw_pcie_readw_dbi(pci, reg);
+ val &= ~PCI_MSI_FLAGS_QMASK;
+ val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
dw_pcie_dbi_ro_wr_en(pci);
- dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val);
+ dw_pcie_writew_dbi(pci, reg, val);
dw_pcie_dbi_ro_wr_dis(pci);
return 0;
@@ -367,21 +376,29 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
struct pci_epc *epc = ep->epc;
u16 msg_ctrl, msg_data;
- u32 msg_addr_lower, msg_addr_upper;
+ u32 msg_addr_lower, msg_addr_upper, reg;
u64 msg_addr;
bool has_upper;
int ret;
+ if (!ep->msi_cap)
+ return -EINVAL;
+
/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */
- msg_ctrl = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
+ reg = ep->msi_cap + PCI_MSI_FLAGS;
+ msg_ctrl = dw_pcie_readw_dbi(pci, reg);
has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
- msg_addr_lower = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32);
+ reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
+ msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
if (has_upper) {
- msg_addr_upper = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32);
- msg_data = dw_pcie_readw_dbi(pci, MSI_MESSAGE_DATA_64);
+ reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
+ msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
+ reg = ep->msi_cap + PCI_MSI_DATA_64;
+ msg_data = dw_pcie_readw_dbi(pci, reg);
} else {
msg_addr_upper = 0;
- msg_data = dw_pcie_readw_dbi(pci, MSI_MESSAGE_DATA_32);
+ reg = ep->msi_cap + PCI_MSI_DATA_32;
+ msg_data = dw_pcie_readw_dbi(pci, reg);
}
msg_addr = ((u64) msg_addr_upper) << 32 | msg_addr_lower;
ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr,
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index b22c5bb..a0ab12f 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -96,17 +96,6 @@
#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
((0x3 << 20) | ((region) << 9) | (0x1 << 8))
-#define MSI_MESSAGE_CONTROL 0x52
-#define MSI_CAP_MMC_SHIFT 1
-#define MSI_CAP_MMC_MASK (7 << MSI_CAP_MMC_SHIFT)
-#define MSI_CAP_MME_SHIFT 4
-#define MSI_CAP_MSI_EN_MASK 0x1
-#define MSI_CAP_MME_MASK (7 << MSI_CAP_MME_SHIFT)
-#define MSI_MESSAGE_ADDR_L32 0x54
-#define MSI_MESSAGE_ADDR_U32 0x58
-#define MSI_MESSAGE_DATA_32 0x58
-#define MSI_MESSAGE_DATA_64 0x5C
-
#define MAX_MSI_IRQS 256
#define MAX_MSI_IRQS_PER_CTRL 32
#define MAX_MSI_CTRLS (MAX_MSI_IRQS / MAX_MSI_IRQS_PER_CTRL)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-07-06 13:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-06 13:26 [PATCH v7 00/11] Add MSI-X support on pcitest tool Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 01/11] PCI: endpoint: Add MSI-X interfaces Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 02/11] PCI: Update xxx_pcie_ep_raise_irq() and pci_epc_raise_irq() signatures Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 03/11] PCI: dwc: Add MSI-X callbacks handler Gustavo Pimentel
2018-07-06 13:26 ` Gustavo Pimentel [this message]
2018-07-06 13:26 ` [PATCH v7 05/11] PCI: dwc: Add legacy interrupt callback handler Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 06/11] pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 07/11] pci-epf-test/pci_endpoint_test: Use irq_type module parameter Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 08/11] pci-epf-test/pci_endpoint_test: Add MSI-X support Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 09/11] pci_endpoint_test: Add 2 ioctl commands Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 10/11] tools: PCI: Add MSI-X support Gustavo Pimentel
2018-07-06 13:26 ` [PATCH v7 11/11] PCI: endpoint: Add MSI set maximum restriction Gustavo Pimentel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530883586-8395-1-git-send-email-gustavo.pimentel@synopsys.com \
--to=gustavo.pimentel@synopsys.com \
--cc="00:00:00"@synopsys.com \
--cc=17@synopsys.com \
--cc=2001@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=Mon@synopsys.com \
--cc=Sep@synopsys.com \
--cc=adouglas@cadence.com \
--cc=bhelgaas@google.com \
--cc=d58689de99704f74c2eb4cf4ca0d62ea2efa36f8@synopsys.com \
--cc=dFrom@synopsys.com \
--cc=jesper.nilsson@axis.com \
--cc=jingoohan1@gmail.com \
--cc=kishon@ti.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=shawn.lin@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).