linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: guoren@kernel.org
To: tglx@linutronix.de, marc.zyngier@arm.com, arnd@arndb.de
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, mhocko@kernel.org,
	torvalds@linux-foundation.org, linux@roeck-us.net,
	Guo Ren <ren_guo@c-sky.com>, Lu Baoquan <lu.baoquan@intellif.com>
Subject: [PATCH 5/5] irqchip/csky: fixup handle_irq_perbit break irq
Date: Wed,  9 Jan 2019 00:26:38 +0800	[thread overview]
Message-ID: <1546964798-30067-5-git-send-email-guoren@kernel.org> (raw)
In-Reply-To: <1546964798-30067-1-git-send-email-guoren@kernel.org>

From: Guo Ren <ren_guo@c-sky.com>

The handle_irq_perbit function loop every bit in hwirq local variable.

handle_irq_perbit(hwirq) {
  for_everyt_bit_in(hwirq) {
	handle_domain_irq()
		->irq_exit()
		->invoke_softirq()
		->__do_softirq()
		->local_irq_enable() // Here will cause new interrupt.
  }
}

When new interrupt coming at local_irq_enable, it will finish another
interrupt handler and pull down the interrupt source. But hwirq is the
local variable for handle_irq_perbit(), it can't get new interrupt
controller pending reg status. So we need update hwirq with pending reg
in every loop.

Also change write_relax to writel could prevent stw from fast retire.
When local_irq is enabled, intc regs is really set-in.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Lu Baoquan <lu.baoquan@intellif.com>
---
 drivers/irqchip/irq-csky-apb-intc.c | 77 ++++++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 35 deletions(-)

diff --git a/drivers/irqchip/irq-csky-apb-intc.c b/drivers/irqchip/irq-csky-apb-intc.c
index 2543bab..5a2ec43 100644
--- a/drivers/irqchip/irq-csky-apb-intc.c
+++ b/drivers/irqchip/irq-csky-apb-intc.c
@@ -95,7 +95,7 @@ static inline void setup_irq_channel(u32 magic, void __iomem *reg_addr)
 
 	/* Setup 64 channel slots */
 	for (i = 0; i < INTC_IRQS; i += 4)
-		writel_relaxed(build_channel_val(i, magic), reg_addr + i);
+		writel(build_channel_val(i, magic), reg_addr + i);
 }
 
 static int __init
@@ -135,16 +135,10 @@ ck_intc_init_comm(struct device_node *node, struct device_node *parent)
 static inline bool handle_irq_perbit(struct pt_regs *regs, u32 hwirq,
 				     u32 irq_base)
 {
-	u32 irq;
-
 	if (hwirq == 0)
 		return 0;
 
-	while (hwirq) {
-		irq = __ffs(hwirq);
-		hwirq &= ~BIT(irq);
-		handle_domain_irq(root_domain, irq_base + irq, regs);
-	}
+	handle_domain_irq(root_domain, irq_base + __fls(hwirq), regs);
 
 	return 1;
 }
@@ -154,12 +148,16 @@ static void gx_irq_handler(struct pt_regs *regs)
 {
 	bool ret;
 
-	do {
-		ret  = handle_irq_perbit(regs,
-				readl_relaxed(reg_base + GX_INTC_PEN31_00), 0);
-		ret |= handle_irq_perbit(regs,
-				readl_relaxed(reg_base + GX_INTC_PEN63_32), 32);
-	} while (ret);
+retry:
+	ret = handle_irq_perbit(regs,
+			readl(reg_base + GX_INTC_PEN63_32), 32);
+	if (ret)
+		goto retry;
+
+	ret = handle_irq_perbit(regs,
+			readl(reg_base + GX_INTC_PEN31_00), 0);
+	if (ret)
+		goto retry;
 }
 
 static int __init
@@ -174,14 +172,14 @@ gx_intc_init(struct device_node *node, struct device_node *parent)
 	/*
 	 * Initial enable reg to disable all interrupts
 	 */
-	writel_relaxed(0x0, reg_base + GX_INTC_NEN31_00);
-	writel_relaxed(0x0, reg_base + GX_INTC_NEN63_32);
+	writel(0x0, reg_base + GX_INTC_NEN31_00);
+	writel(0x0, reg_base + GX_INTC_NEN63_32);
 
 	/*
 	 * Initial mask reg with all unmasked, because we only use enalbe reg
 	 */
-	writel_relaxed(0x0, reg_base + GX_INTC_NMASK31_00);
-	writel_relaxed(0x0, reg_base + GX_INTC_NMASK63_32);
+	writel(0x0, reg_base + GX_INTC_NMASK31_00);
+	writel(0x0, reg_base + GX_INTC_NMASK63_32);
 
 	setup_irq_channel(0x03020100, reg_base + GX_INTC_SOURCE);
 
@@ -204,20 +202,29 @@ static void ck_irq_handler(struct pt_regs *regs)
 	void __iomem *reg_pen_lo = reg_base + CK_INTC_PEN31_00;
 	void __iomem *reg_pen_hi = reg_base + CK_INTC_PEN63_32;
 
-	do {
-		/* handle 0 - 31 irqs */
-		ret  = handle_irq_perbit(regs, readl_relaxed(reg_pen_lo), 0);
-		ret |= handle_irq_perbit(regs, readl_relaxed(reg_pen_hi), 32);
+retry:
+	/* handle 0 - 63 irqs */
+	ret = handle_irq_perbit(regs, readl(reg_pen_hi), 32);
+	if (ret)
+		goto retry;
 
-		if (nr_irq == INTC_IRQS)
-			continue;
+	ret = handle_irq_perbit(regs, readl(reg_pen_lo), 0);
+	if (ret)
+		goto retry;
+
+	if (nr_irq == INTC_IRQS)
+		return;
 
-		/* handle 64 - 127 irqs */
-		ret |= handle_irq_perbit(regs,
-			readl_relaxed(reg_pen_lo + CK_INTC_DUAL_BASE), 64);
-		ret |= handle_irq_perbit(regs,
-			readl_relaxed(reg_pen_hi + CK_INTC_DUAL_BASE), 96);
-	} while (ret);
+	/* handle 64 - 127 irqs */
+	ret = handle_irq_perbit(regs,
+			readl(reg_pen_hi + CK_INTC_DUAL_BASE), 96);
+	if (ret)
+		goto retry;
+
+	ret = handle_irq_perbit(regs,
+			readl(reg_pen_lo + CK_INTC_DUAL_BASE), 64);
+	if (ret)
+		goto retry;
 }
 
 static int __init
@@ -230,11 +237,11 @@ ck_intc_init(struct device_node *node, struct device_node *parent)
 		return ret;
 
 	/* Initial enable reg to disable all interrupts */
-	writel_relaxed(0, reg_base + CK_INTC_NEN31_00);
-	writel_relaxed(0, reg_base + CK_INTC_NEN63_32);
+	writel(0, reg_base + CK_INTC_NEN31_00);
+	writel(0, reg_base + CK_INTC_NEN63_32);
 
 	/* Enable irq intc */
-	writel_relaxed(BIT(31), reg_base + CK_INTC_ICR);
+	writel(BIT(31), reg_base + CK_INTC_ICR);
 
 	ck_set_gc(node, reg_base, CK_INTC_NEN31_00, 0);
 	ck_set_gc(node, reg_base, CK_INTC_NEN63_32, 32);
@@ -260,8 +267,8 @@ ck_dual_intc_init(struct device_node *node, struct device_node *parent)
 		return ret;
 
 	/* Initial enable reg to disable all interrupts */
-	writel_relaxed(0, reg_base + CK_INTC_NEN31_00 + CK_INTC_DUAL_BASE);
-	writel_relaxed(0, reg_base + CK_INTC_NEN63_32 + CK_INTC_DUAL_BASE);
+	writel(0, reg_base + CK_INTC_NEN31_00 + CK_INTC_DUAL_BASE);
+	writel(0, reg_base + CK_INTC_NEN63_32 + CK_INTC_DUAL_BASE);
 
 	ck_set_gc(node, reg_base + CK_INTC_DUAL_BASE, CK_INTC_NEN31_00, 64);
 	ck_set_gc(node, reg_base + CK_INTC_DUAL_BASE, CK_INTC_NEN63_32, 96);
-- 
2.7.4


      parent reply	other threads:[~2019-01-08 16:28 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-08 16:26 [PATCH 1/5] Documentation/features: Add csky kernel features guoren
2019-01-08 16:26 ` [PATCH 2/5] csky: fixup relocation error with 807 & 860 guoren
2019-01-08 16:26 ` [PATCH 3/5] csky: fixup CACHEV1 store instruction fast retire guoren
2019-01-08 16:26 ` [PATCH 4/5] csky: fixup compile error with pte_alloc guoren
2019-01-08 17:33   ` Linus Torvalds
2019-01-08 16:26 ` guoren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1546964798-30067-5-git-send-email-guoren@kernel.org \
    --to=guoren@kernel.org \
    --cc=arnd@arndb.de \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lu.baoquan@intellif.com \
    --cc=marc.zyngier@arm.com \
    --cc=mhocko@kernel.org \
    --cc=ren_guo@c-sky.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).