Re: [PATCH 1/6] dt-binbings: mfd: Add bindings for the LTC4283 Swap Controller

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 14 Aug 2025 11:52:23 +0100, Nuno Sá wrote:
> The LTC4283 is a negative voltage hot swap controller that drives an
> external N-channel MOSFET to allow a board to be safely inserted and
> removed from a live backplane.
> 
> Main usage is as an Hardware Monitoring device. However, it has up to 8
> pins that can be configured and used as GPIOs and hence, the device can
> also be a GPIO controller.
> 
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> ---
>  .../devicetree/bindings/mfd/adi,ltc4283.yaml       | 85 ++++++++++++++++++++++
>  MAINTAINERS                                        |  7 ++
>  2 files changed, 92 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,ltc4283.yaml:
	Error in referenced schema matching $id: http://devicetree.org/schemas/gpio/adi,ltc4283.yaml
	Tried these paths (check schema $id if path is wrong):
	/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/adi,ltc4283.yaml
	/usr/local/lib/python3.13/dist-packages/dtschema/schemas/gpio/adi,ltc4283.yaml

/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: swap-controller@15 (adi,ltc4283): gpio: {'compatible': ['adi,ltc4283-gpio'], 'gpio-controller': True, '#gpio-cells': 2} should not be valid under {'description': "Can't find referenced schema: http://devicetree.org/schemas/gpio/adi,ltc4283.yaml#"}
	from schema $id: http://devicetree.org/schemas/mfd/adi,ltc4283.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: swap-controller@15 (adi,ltc4283): hwmon: {'compatible': ['adi,ltc4283-hwmon'], 'adi,rsense-nano-ohms': [500], 'adi,current-limit-sense-microvolt': [[25000]], 'adi,current-limit-foldback-factor': [10], 'adi,cooling-delay-ms': [8190], 'adi,fet-bad-timer-delay-ms': [512]} should not be valid under {'description': "Can't find referenced schema: http://devicetree.org/schemas/hwmon/adi,ltc4283.yaml#"}
	from schema $id: http://devicetree.org/schemas/mfd/adi,ltc4283.yaml#
Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: /example-0/i2c/swap-controller@15/gpio: failed to match any schema with compatible: ['adi,ltc4283-gpio']
Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: /example-0/i2c/swap-controller@15/hwmon: failed to match any schema with compatible: ['adi,ltc4283-hwmon']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250814-ltc4283-support-v1-1-88b2cef773f2@analog.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.