[PATCH v2 01/15] mm: vmalloc.c: remove a kernel-doc annotation from a removed parameter

[PATCH v2 01/15] mm: vmalloc.c: remove a kernel-doc annotation from a removed parameter

[Mauro Carvalho Chehab]

The prot argument was removed. Drop it als from the kernel-doc
markup.

Fixes: 3c8ce1be43d3 ("mm: remove the prot argument from vm_map_ram")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 mm/vmalloc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 963db1037f61..c3b3f94e08da 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1809,7 +1809,6 @@ EXPORT_SYMBOL(vm_unmap_ram);
  * @pages: an array of pointers to the pages to be mapped
  * @count: number of pages
  * @node: prefer to allocate data structures on this node
- * @prot: memory protection to use. PAGE_KERNEL for regular RAM
  *
  * If you use this function for less than VMAP_MAX_ALLOC pages, it could be
  * faster than vmap so it's good.  But if you mix long-life and short-life
-- 
2.26.2

[PATCH v2 02/15] net: dev: add a missing kernel-doc annotation

[Mauro Carvalho Chehab]

The dev argument was not listed at kernel-doc markup:

	./net/core/dev.c:7878: warning: Function parameter or member 'dev' not described in 'netdev_get_xmit_slave'

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 net/core/dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/dev.c b/net/core/dev.c
index 3a46b86cbd67..cc57347b11c5 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -7908,6 +7908,7 @@ EXPORT_SYMBOL(netdev_bonding_info_change);
 
 /**
  * netdev_get_xmit_slave - Get the xmit slave of master device
+ * @dev: device
  * @skb: The packet
  * @all_slaves: assume all the slaves are active
  *
-- 
2.26.2

[PATCH v2 03/15] net: netdevice.h: add a description for napi_defer_hard_irqs

[Mauro Carvalho Chehab]

Changeset 6f8b12d661d0 ("net: napi: add hard irqs deferral feature")
added a new element at struct net_device.

Add a description for it, based on what's described at the changeset
which added such feature.

Fixes: 6f8b12d661d0 ("net: napi: add hard irqs deferral feature")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 include/linux/netdevice.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 39e28e11863c..027df84f0f59 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1742,6 +1742,8 @@ enum netdev_priv_flags {
  *	@real_num_rx_queues: 	Number of RX queues currently active in device
  *	@xdp_prog:		XDP sockets filter program pointer
  *	@gro_flush_timeout:	timeout for GRO layer in NAPI
+ *	@napi_defer_hard_irqs:	If not zero, provides a counter that would
+ *				allow to avoid NIC hard IRQ, on busy queues.
  *
  *	@rx_handler:		handler for received packets
  *	@rx_handler_data: 	XXX: need comments on this one
-- 
2.26.2

[PATCH v2 04/15] scripts/kernel-doc: parse __ETHTOOL_DECLARE_LINK_MODE_MASK

[Mauro Carvalho Chehab]

The __ETHTOOL_DECLARE_LINK_MODE_MASK macro is a variant of
DECLARE_BITMAP(), used by phylink.h. As we have already a
parser for DECLARE_BITMAP(), let's add one for this macro,
in order to avoid such warnings:

	./include/linux/phylink.h:54: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising' not described in 'phylink_link_state'
	./include/linux/phylink.h:54: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising' not described in 'phylink_link_state'

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 scripts/kernel-doc | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index b4c963f8364e..43b8312363a5 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1083,7 +1083,9 @@ sub dump_struct($$) {
 	$members =~ s/\s*__packed\s*/ /gos;
 	$members =~ s/\s*CRYPTO_MINALIGN_ATTR/ /gos;
 	$members =~ s/\s*____cacheline_aligned_in_smp/ /gos;
+
 	# replace DECLARE_BITMAP
+	$members =~ s/__ETHTOOL_DECLARE_LINK_MODE_MASK\s*\(([^\)]+)\)/DECLARE_BITMAP($1, __ETHTOOL_LINK_MODE_MASK_NBITS)/gos;
 	$members =~ s/DECLARE_BITMAP\s*\(([^,)]+),\s*([^,)]+)\)/unsigned long $1\[BITS_TO_LONGS($2)\]/gos;
 	# replace DECLARE_HASHTABLE
 	$members =~ s/DECLARE_HASHTABLE\s*\(([^,)]+),\s*([^,)]+)\)/unsigned long $1\[1 << (($2) - 1)\]/gos;
-- 
2.26.2

[PATCH v2 05/15] net: pylink.h: add kernel-doc descriptions for new fields at phylink_config

[Mauro Carvalho Chehab]

Some fields were moved from struct phylink into phylink_config.
Update the kernel-doc markups for the config struct accordingly

Fixes: 5c05c1dbb177 ("net: phylink, dsa: eliminate phylink_fixed_state_cb()")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 include/linux/phylink.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index cc5b452a184e..02ff1419d4be 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -62,6 +62,10 @@ enum phylink_op_type {
  * @dev: a pointer to a struct device associated with the MAC
  * @type: operation type of PHYLINK instance
  * @pcs_poll: MAC PCS cannot provide link change interrupt
+ * @poll_fixed_state: if true, starts link_poll,
+ *		      if MAC link is at %MLO_AN_FIXED mode.
+ * @get_fixed_state: callback to execute to determine the fixed link state,
+ *		     if MAC link is at %MLO_AN_FIXED mode.
  */
 struct phylink_config {
 	struct device *dev;
-- 
2.26.2

Re: [PATCH v2 05/15] net: pylink.h: add kernel-doc descriptions for new fields at phylink_config

[Russell King - ARM Linux admin]

On Tue, Jun 23, 2020 at 09:09:01AM +0200, Mauro Carvalho Chehab wrote:
> Some fields were moved from struct phylink into phylink_config.
> Update the kernel-doc markups for the config struct accordingly
> 
> Fixes: 5c05c1dbb177 ("net: phylink, dsa: eliminate phylink_fixed_state_cb()")
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>

Thanks.

> ---
>  include/linux/phylink.h | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/include/linux/phylink.h b/include/linux/phylink.h
> index cc5b452a184e..02ff1419d4be 100644
> --- a/include/linux/phylink.h
> +++ b/include/linux/phylink.h
> @@ -62,6 +62,10 @@ enum phylink_op_type {
>   * @dev: a pointer to a struct device associated with the MAC
>   * @type: operation type of PHYLINK instance
>   * @pcs_poll: MAC PCS cannot provide link change interrupt
> + * @poll_fixed_state: if true, starts link_poll,
> + *		      if MAC link is at %MLO_AN_FIXED mode.
> + * @get_fixed_state: callback to execute to determine the fixed link state,
> + *		     if MAC link is at %MLO_AN_FIXED mode.
>   */
>  struct phylink_config {
>  	struct device *dev;
> -- 
> 2.26.2
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

[PATCH v2 06/15] scripts/kernel-doc: handle function pointer prototypes

[Mauro Carvalho Chehab]

There are some function pointer prototypes inside the net
includes, like this one:

	int (*pcs_config)(struct phylink_config *config, unsigned int mode,
			  phy_interface_t interface, const unsigned long *advertising);

There's nothing wrong using it with kernel-doc, but we need to
add a rule for it to parse such kind of prototype.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 scripts/kernel-doc | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 43b8312363a5..e991d7f961e9 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1771,6 +1771,11 @@ sub process_proto_function($$) {
 	$prototype =~ s@/\*.*?\*/@@gos;	# strip comments.
 	$prototype =~ s@[\r\n]+@ @gos; # strip newlines/cr's.
 	$prototype =~ s@^\s+@@gos; # strip leading spaces
+
+	 # Handle prototypes for function pointers like:
+	 # int (*pcs_config)(struct foo)
+	$prototype =~ s@^(\S+\s+)\(\s*\*(\S+)\)@$1$2@gos;
+
 	if ($prototype =~ /SYSCALL_DEFINE/) {
 		syscall_munge();
 	}
-- 
2.26.2

[PATCH v2 07/15] fs: fs.h: fix a kernel-doc parameter description

[Mauro Carvalho Chehab]

Changeset 3b0311e7ca71 ("vfs: track per-sb writeback errors and report them to syncfs")
added a variant of filemap_sample_wb_err(), but it forgot to
rename the arguments at the kernel-doc markup. Fix it.

Fix those warnings:
	./include/linux/fs.h:2845: warning: Function parameter or member 'file' not described in 'file_sample_sb_err'
	./include/linux/fs.h:2845: warning: Excess function parameter 'mapping' description in 'file_sample_sb_err'

Fixes: 3b0311e7ca71 ("vfs: track per-sb writeback errors and report them to syncfs")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 include/linux/fs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/fs.h b/include/linux/fs.h
index 633c50cd24aa..523705fd8146 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2852,7 +2852,7 @@ static inline errseq_t filemap_sample_wb_err(struct address_space *mapping)
 
 /**
  * file_sample_sb_err - sample the current errseq_t to test for later errors
- * @mapping: mapping to be sampled
+ * @file: file pointer to be sampled
  *
  * Grab the most current superblock-level errseq_t value for the given
  * struct file.
-- 
2.26.2

[PATCH v2 08/15] kcsan: fix a kernel-doc warning

[Mauro Carvalho Chehab]

One of the kernel-doc markups there have two "note" sections:

	./include/linux/kcsan-checks.h:346: warning: duplicate section name 'Note'

While this is not the case here, duplicated sections can cause
build issues on Sphinx. So, let's change the notes section
to use, instead, a list for those 2 notes at the same function.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Marco Elver <elver@google.com>
---
 include/linux/kcsan-checks.h | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/include/linux/kcsan-checks.h b/include/linux/kcsan-checks.h
index 7b0b9c44f5f3..c5f6c1dcf7e3 100644
--- a/include/linux/kcsan-checks.h
+++ b/include/linux/kcsan-checks.h
@@ -337,11 +337,13 @@ static inline void __kcsan_disable_current(void) { }
  *		release_for_reuse(obj);
  *	}
  *
- * Note: ASSERT_EXCLUSIVE_ACCESS_SCOPED(), if applicable, performs more thorough
- * checking if a clear scope where no concurrent accesses are expected exists.
+ * Note:
  *
- * Note: For cases where the object is freed, `KASAN <kasan.html>`_ is a better
- * fit to detect use-after-free bugs.
+ * 1. ASSERT_EXCLUSIVE_ACCESS_SCOPED(), if applicable, performs more thorough
+ *    checking if a clear scope where no concurrent accesses are expected exists.
+ *
+ * 2. For cases where the object is freed, `KASAN <kasan.html>`_ is a better
+ *    fit to detect use-after-free bugs.
  *
  * @var: variable to assert on
  */
-- 
2.26.2

[PATCH v2 09/15] selftests/vm/keys: fix a broken reference at protection_keys.c

[Mauro Carvalho Chehab]

Changeset 1eecbcdca2bd ("docs: move protection-keys.rst to the core-api book")
from Jun 7, 2019 converted protection-keys.txt file to ReST.

A recent change at protection_keys.c partially reverted such
changeset, causing it to point to a non-existing file:

	- * Tests x86 Memory Protection Keys (see Documentation/core-api/protection-keys.rst)
	+ * Tests Memory Protection Keys (see Documentation/vm/protection-keys.txt)

It sounds to me that the changeset that introduced such change
4645e3563673 ("selftests/vm/pkeys: rename all references to pkru to a generic name")
could also have other side effects, as it sounds that it was not
generated against uptream code, but, instead, against a version
older than Jun 7, 2019.

Fixes: 4645e3563673 ("selftests/vm/pkeys: rename all references to pkru to a generic name")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 tools/testing/selftests/vm/protection_keys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/vm/protection_keys.c b/tools/testing/selftests/vm/protection_keys.c
index fc19addcb5c8..fdbb602ecf32 100644
--- a/tools/testing/selftests/vm/protection_keys.c
+++ b/tools/testing/selftests/vm/protection_keys.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Tests Memory Protection Keys (see Documentation/vm/protection-keys.txt)
+ * Tests Memory Protection Keys (see Documentation/core-api/protection-keys.rst)
  *
  * There are examples in here of:
  *  * how to set protection keys on memory
-- 
2.26.2

[PATCH v2 10/15] docs: hugetlbpage.rst: fix some warnings

[Mauro Carvalho Chehab]

Some new command line parameters were added at hugetlbpage.rst.
Adjust them in order to properly parse that part of the file,
avoiding those warnings:

    Documentation/admin-guide/mm/hugetlbpage.rst:105: WARNING: Unexpected indentation.
    Documentation/admin-guide/mm/hugetlbpage.rst:108: WARNING: Unexpected indentation.
    Documentation/admin-guide/mm/hugetlbpage.rst:109: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/admin-guide/mm/hugetlbpage.rst:112: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/admin-guide/mm/hugetlbpage.rst:120: WARNING: Unexpected indentation.
    Documentation/admin-guide/mm/hugetlbpage.rst:121: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/admin-guide/mm/hugetlbpage.rst:132: WARNING: Unexpected indentation.
    Documentation/admin-guide/mm/hugetlbpage.rst:135: WARNING: Block quote ends without a blank line; unexpected unindent.

Fixes: cd9fa28b5351 ("hugetlbfs: clean up command line processing")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/admin-guide/mm/hugetlbpage.rst | 23 +++++++++++++++-----
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
index 5026e58826e2..015a5f7d7854 100644
--- a/Documentation/admin-guide/mm/hugetlbpage.rst
+++ b/Documentation/admin-guide/mm/hugetlbpage.rst
@@ -101,37 +101,48 @@ be specified in bytes with optional scale suffix [kKmMgG].  The default huge
 page size may be selected with the "default_hugepagesz=<size>" boot parameter.
 
 Hugetlb boot command line parameter semantics
-hugepagesz - Specify a huge page size.  Used in conjunction with hugepages
+
+hugepagesz
+	Specify a huge page size.  Used in conjunction with hugepages
 	parameter to preallocate a number of huge pages of the specified
 	size.  Hence, hugepagesz and hugepages are typically specified in
-	pairs such as:
+	pairs such as::
+
 		hugepagesz=2M hugepages=512
+
 	hugepagesz can only be specified once on the command line for a
 	specific huge page size.  Valid huge page sizes are architecture
 	dependent.
-hugepages - Specify the number of huge pages to preallocate.  This typically
+hugepages
+	Specify the number of huge pages to preallocate.  This typically
 	follows a valid hugepagesz or default_hugepagesz parameter.  However,
 	if hugepages is the first or only hugetlb command line parameter it
 	implicitly specifies the number of huge pages of default size to
 	allocate.  If the number of huge pages of default size is implicitly
 	specified, it can not be overwritten by a hugepagesz,hugepages
 	parameter pair for the default size.
-	For example, on an architecture with 2M default huge page size:
+
+	For example, on an architecture with 2M default huge page size::
+
 		hugepages=256 hugepagesz=2M hugepages=512
+
 	will result in 256 2M huge pages being allocated and a warning message
 	indicating that the hugepages=512 parameter is ignored.  If a hugepages
 	parameter is preceded by an invalid hugepagesz parameter, it will
 	be ignored.
-default_hugepagesz - Specify the default huge page size.  This parameter can
+default_hugepagesz
+	pecify the default huge page size.  This parameter can
 	only be specified once on the command line.  default_hugepagesz can
 	optionally be followed by the hugepages parameter to preallocate a
 	specific number of huge pages of default size.  The number of default
 	sized huge pages to preallocate can also be implicitly specified as
 	mentioned in the hugepages section above.  Therefore, on an
-	architecture with 2M default huge page size:
+	architecture with 2M default huge page size::
+
 		hugepages=256
 		default_hugepagesz=2M hugepages=256
 		hugepages=256 default_hugepagesz=2M
+
 	will all result in 256 2M huge pages being allocated.  Valid default
 	huge page size is architecture dependent.
 
-- 
2.26.2

Re: [PATCH v2 10/15] docs: hugetlbpage.rst: fix some warnings

[Mike Kravetz]

On 6/23/20 12:09 AM, Mauro Carvalho Chehab wrote:
> Some new command line parameters were added at hugetlbpage.rst.
> Adjust them in order to properly parse that part of the file,
> avoiding those warnings:
> 
>     Documentation/admin-guide/mm/hugetlbpage.rst:105: WARNING: Unexpected indentation.
>     Documentation/admin-guide/mm/hugetlbpage.rst:108: WARNING: Unexpected indentation.
>     Documentation/admin-guide/mm/hugetlbpage.rst:109: WARNING: Block quote ends without a blank line; unexpected unindent.
>     Documentation/admin-guide/mm/hugetlbpage.rst:112: WARNING: Block quote ends without a blank line; unexpected unindent.
>     Documentation/admin-guide/mm/hugetlbpage.rst:120: WARNING: Unexpected indentation.
>     Documentation/admin-guide/mm/hugetlbpage.rst:121: WARNING: Block quote ends without a blank line; unexpected unindent.
>     Documentation/admin-guide/mm/hugetlbpage.rst:132: WARNING: Unexpected indentation.
>     Documentation/admin-guide/mm/hugetlbpage.rst:135: WARNING: Block quote ends without a blank line; unexpected unindent.
> 
> Fixes: cd9fa28b5351 ("hugetlbfs: clean up command line processing")
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/admin-guide/mm/hugetlbpage.rst | 23 +++++++++++++++-----
>  1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
> index 5026e58826e2..015a5f7d7854 100644
> --- a/Documentation/admin-guide/mm/hugetlbpage.rst
> +++ b/Documentation/admin-guide/mm/hugetlbpage.rst
> @@ -101,37 +101,48 @@ be specified in bytes with optional scale suffix [kKmMgG].  The default huge
>  page size may be selected with the "default_hugepagesz=<size>" boot parameter.
>  
>  Hugetlb boot command line parameter semantics
> -hugepagesz - Specify a huge page size.  Used in conjunction with hugepages
> +
> +hugepagesz
> +	Specify a huge page size.  Used in conjunction with hugepages
>  	parameter to preallocate a number of huge pages of the specified
>  	size.  Hence, hugepagesz and hugepages are typically specified in
> -	pairs such as:
> +	pairs such as::
> +
>  		hugepagesz=2M hugepages=512
> +
>  	hugepagesz can only be specified once on the command line for a
>  	specific huge page size.  Valid huge page sizes are architecture
>  	dependent.
> -hugepages - Specify the number of huge pages to preallocate.  This typically
> +hugepages
> +	Specify the number of huge pages to preallocate.  This typically
>  	follows a valid hugepagesz or default_hugepagesz parameter.  However,
>  	if hugepages is the first or only hugetlb command line parameter it
>  	implicitly specifies the number of huge pages of default size to
>  	allocate.  If the number of huge pages of default size is implicitly
>  	specified, it can not be overwritten by a hugepagesz,hugepages
>  	parameter pair for the default size.
> -	For example, on an architecture with 2M default huge page size:
> +
> +	For example, on an architecture with 2M default huge page size::
> +
>  		hugepages=256 hugepagesz=2M hugepages=512
> +
>  	will result in 256 2M huge pages being allocated and a warning message
>  	indicating that the hugepages=512 parameter is ignored.  If a hugepages
>  	parameter is preceded by an invalid hugepagesz parameter, it will
>  	be ignored.
> -default_hugepagesz - Specify the default huge page size.  This parameter can
> +default_hugepagesz
> +	pecify the default huge page size.  This parameter can

Oops, should be 'Specify' not 'pecify'

Other than that, this looks good.  Thanks!
-- 
Mike Kravetz

>  	only be specified once on the command line.  default_hugepagesz can
>  	optionally be followed by the hugepages parameter to preallocate a
>  	specific number of huge pages of default size.  The number of default
>  	sized huge pages to preallocate can also be implicitly specified as
>  	mentioned in the hugepages section above.  Therefore, on an
> -	architecture with 2M default huge page size:
> +	architecture with 2M default huge page size::
> +
>  		hugepages=256
>  		default_hugepagesz=2M hugepages=256
>  		hugepages=256 default_hugepagesz=2M
> +
>  	will all result in 256 2M huge pages being allocated.  Valid default
>  	huge page size is architecture dependent.
>  
> 

[PATCH v2 11/15] docs: powerpc: fix some issues at vas-api.rst

[Mauro Carvalho Chehab]

There are a few issues on this document, when built via the
building with ``make htmldocs``:

    Documentation/powerpc/vas-api.rst:116: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:116: WARNING: Inline emphasis start-string without end-string.
    Documentation/powerpc/vas-api.rst:117: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:117: WARNING: Inline emphasis start-string without end-string.
    Documentation/powerpc/vas-api.rst:120: WARNING: Definition list ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:124: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:133: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:135: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:150: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:151: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:161: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:176: WARNING: Definition list ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:253: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:253: WARNING: Inline emphasis start-string without end-string.
    Documentation/powerpc/vas-api.rst:259: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:261: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:266: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:267: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:270: WARNING: Definition list ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:271: WARNING: Definition list ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:273: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:274: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:277: WARNING: Definition list ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:278: WARNING: Definition list ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:280: WARNING: Unexpected indentation.
    Documentation/powerpc/vas-api.rst:287: WARNING: Block quote ends without a blank line; unexpected unindent.
    Documentation/powerpc/vas-api.rst:289: WARNING: Block quote ends without a blank line; unexpected unindent.

Fixes: c12e38b1d52e ("Documentation/powerpc: VAS API")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/powerpc/vas-api.rst | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/Documentation/powerpc/vas-api.rst b/Documentation/powerpc/vas-api.rst
index 1217c2f1595e..b7fdbe560010 100644
--- a/Documentation/powerpc/vas-api.rst
+++ b/Documentation/powerpc/vas-api.rst
@@ -87,6 +87,7 @@ Applications may chose a specific instance of the NX co-processor using
 the vas_id field in the VAS_TX_WIN_OPEN ioctl as detailed below.
 
 A userspace library libnxz is available here but still in development:
+
 	 https://github.com/abalib/power-gzip
 
 Applications that use inflate / deflate calls can link with libnxz
@@ -110,6 +111,7 @@ Applications should use the VAS_TX_WIN_OPEN ioctl as follows to establish
 a connection with NX co-processor engine:
 
 	::
+
 		struct vas_tx_win_open_attr {
 			__u32   version;
 			__s16   vas_id; /* specific instance of vas or -1
@@ -119,8 +121,10 @@ a connection with NX co-processor engine:
 			__u64   reserved2[6];
 		};
 
-	version: The version field must be currently set to 1.
-	vas_id: If '-1' is passed, kernel will make a best-effort attempt
+	version:
+		The version field must be currently set to 1.
+	vas_id:
+		If '-1' is passed, kernel will make a best-effort attempt
 		to assign an optimal instance of NX for the process. To
 		select the specific VAS instance, refer
 		"Discovery of available VAS engines" section below.
@@ -129,7 +133,8 @@ a connection with NX co-processor engine:
 	and must be set to 0.
 
 	The attributes attr for the VAS_TX_WIN_OPEN ioctl are defined as
-	follows:
+	follows::
+
 		#define VAS_MAGIC 'v'
 		#define VAS_TX_WIN_OPEN _IOW(VAS_MAGIC, 1,
 						struct vas_tx_win_open_attr)
@@ -141,6 +146,8 @@ a connection with NX co-processor engine:
 	returns -1 and sets the errno variable to indicate the error.
 
 	Error conditions:
+
+		======	================================================
 		EINVAL	fd does not refer to a valid VAS device.
 		EINVAL	Invalid vas ID
 		EINVAL	version is not set with proper value
@@ -149,6 +156,7 @@ a connection with NX co-processor engine:
 		ENOSPC	System has too many active windows (connections)
 			opened
 		EINVAL	reserved fields are not set to 0.
+		======	================================================
 
 	See the ioctl(2) man page for more details, error codes and
 	restrictions.
@@ -158,11 +166,13 @@ mmap() NX-GZIP device
 
 The mmap() system call for a NX-GZIP device fd returns a paste_address
 that the application can use to copy/paste its CRB to the hardware engines.
+
 	::
 
 		paste_addr = mmap(addr, size, prot, flags, fd, offset);
 
 	Only restrictions on mmap for a NX-GZIP device fd are:
+
 		* size should be PAGE_SIZE
 		* offset parameter should be 0ULL
 
@@ -170,10 +180,12 @@ that the application can use to copy/paste its CRB to the hardware engines.
 	In addition to the error conditions listed on the mmap(2) man
 	page, can also fail with one of the following error codes:
 
+		======	=============================================
 		EINVAL	fd is not associated with an open window
 			(i.e mmap() does not follow a successful call
 			to the VAS_TX_WIN_OPEN ioctl).
 		EINVAL	offset field is not 0ULL.
+		======	=============================================
 
 Discovery of available VAS engines
 ==================================
@@ -210,7 +222,7 @@ In case if NX encounters translation error (called NX page fault) on CSB
 address or any request buffer, raises an interrupt on the CPU to handle the
 fault. Page fault can happen if an application passes invalid addresses or
 request buffers are not in memory. The operating system handles the fault by
-updating CSB with the following data:
+updating CSB with the following data::
 
 	csb.flags = CSB_V;
 	csb.cc = CSB_CC_TRANSLATION;
@@ -223,7 +235,7 @@ the application can resend this request to NX.
 
 If the OS can not update CSB due to invalid CSB address, sends SEGV signal
 to the process who opened the send window on which the original request was
-issued. This signal returns with the following siginfo struct:
+issued. This signal returns with the following siginfo struct::
 
 	siginfo.si_signo = SIGSEGV;
 	siginfo.si_errno = EFAULT;
@@ -248,6 +260,7 @@ Simple example
 ==============
 
 	::
+
 		int use_nx_gzip()
 		{
 			int rc, fd;
-- 
2.26.2

[PATCH v2 12/15] docs: driver-model: remove a duplicated markup at driver.rst

[Mauro Carvalho Chehab]

The "::" markup is there twice, causing a warning:

    Documentation/driver-api/driver-model/driver.rst:233: WARNING: Inline emphasis start-string without end-string.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/driver-api/driver-model/driver.rst | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/driver-api/driver-model/driver.rst b/Documentation/driver-api/driver-model/driver.rst
index 7d5040f6a3d8..06f818b1d622 100644
--- a/Documentation/driver-api/driver-model/driver.rst
+++ b/Documentation/driver-api/driver-model/driver.rst
@@ -228,8 +228,6 @@ over management of devices from the bootloader, the usage of sync_state() is
 not restricted to that. Use it whenever it makes sense to take an action after
 all the consumers of a device have probed::
 
-::
-
 	int 	(*remove)	(struct device *dev);
 
 remove is called to unbind a driver from a device. This may be
-- 
2.26.2

[PATCH v2 13/15] docs: ABI: fix a typo when pointing to w1-generic.rst

[Mauro Carvalho Chehab]

There's a typo there:

	w1_generic.rst -> w1-generic.rst

Causing the document reference to point to the wrong place.

Fixes: e2c94d6f5720 ("w1_therm: adding alarm sysfs entry")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/ABI/testing/sysfs-driver-w1_therm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm
index 076659d506f2..9b488c0afdfa 100644
--- a/Documentation/ABI/testing/sysfs-driver-w1_therm
+++ b/Documentation/ABI/testing/sysfs-driver-w1_therm
@@ -8,7 +8,7 @@ Description:
 		to device min/max capabilities. Values are integer as they are
 		stored in a 8bit register in the device. Lowest value is
 		automatically put to TL. Once set, alarms could be search at
-		master level, refer to Documentation/w1/w1_generic.rst for
+		master level, refer to Documentation/w1/w1-generic.rst for
 		detailed information
 Users:		any user space application which wants to communicate with
 		w1_term device
-- 
2.26.2

[PATCH v2 14/15] docs: fix references for DMA*.txt files

[Mauro Carvalho Chehab]

As we moved those files to core-api, fix references to point
to their newer locations.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/PCI/pci.rst                          |  6 +++---
 Documentation/block/biodoc.rst                     |  2 +-
 Documentation/bus-virt-phys-mapping.txt            |  2 +-
 Documentation/core-api/dma-api.rst                 |  6 +++---
 Documentation/core-api/dma-isa-lpc.rst             |  2 +-
 Documentation/driver-api/usb/dma.rst               |  6 +++---
 .../translations/ko_KR/memory-barriers.txt         |  6 +++---
 arch/ia64/hp/common/sba_iommu.c                    | 12 ++++++------
 arch/parisc/kernel/pci-dma.c                       |  2 +-
 arch/x86/include/asm/dma-mapping.h                 |  4 ++--
 arch/x86/kernel/amd_gart_64.c                      |  2 +-
 drivers/parisc/sba_iommu.c                         | 14 +++++++-------
 include/linux/dma-mapping.h                        |  2 +-
 include/media/videobuf-dma-sg.h                    |  2 +-
 kernel/dma/debug.c                                 |  2 +-
 15 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index 8c016d8c9862..d10d3fe604c5 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -265,7 +265,7 @@ Set the DMA mask size
 ---------------------
 .. note::
    If anything below doesn't make sense, please refer to
-   Documentation/DMA-API.txt. This section is just a reminder that
+   :doc:`/core-api/dma-api`. This section is just a reminder that
    drivers need to indicate DMA capabilities of the device and is not
    an authoritative source for DMA interfaces.
 
@@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
 Setup shared control data
 -------------------------
 Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
-memory.  See Documentation/DMA-API.txt for a full description of
+memory.  See :doc:`/core-api/dma-api` for a full description of
 the DMA APIs. This section is just a reminder that it needs to be done
 before enabling DMA on the device.
 
@@ -421,7 +421,7 @@ owners if there is one.
 
 Then clean up "consistent" buffers which contain the control data.
 
-See Documentation/DMA-API.txt for details on unmapping interfaces.
+See :doc:`/core-api/dma-api` for details on unmapping interfaces.
 
 
 Unregister from other subsystems
diff --git a/Documentation/block/biodoc.rst b/Documentation/block/biodoc.rst
index b964796ec9c7..ba7f45d0271c 100644
--- a/Documentation/block/biodoc.rst
+++ b/Documentation/block/biodoc.rst
@@ -196,7 +196,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion
+Note: Please refer to :doc:`/core-api/dma-api-howto` for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 
diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
index 4bb07c2f3e7d..c7bc99cd2e21 100644
--- a/Documentation/bus-virt-phys-mapping.txt
+++ b/Documentation/bus-virt-phys-mapping.txt
@@ -8,7 +8,7 @@ How to access I/O mapped memory from within device drivers
 
 	The virt_to_bus() and bus_to_virt() functions have been
 	superseded by the functionality provided by the PCI DMA interface
-	(see Documentation/DMA-API-HOWTO.txt).  They continue
+	(see :doc:`/core-api/dma-api-howto`).  They continue
 	to be documented below for historical purposes, but new code
 	must not use them. --davidm 00/12/12
 
diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst
index 2d8d2fed7317..63b4a2f20867 100644
--- a/Documentation/core-api/dma-api.rst
+++ b/Documentation/core-api/dma-api.rst
@@ -5,7 +5,7 @@ Dynamic DMA mapping using the generic device
 :Author: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 
 This document describes the DMA API.  For a more gentle introduction
-of the API (and actual examples), see Documentation/DMA-API-HOWTO.txt.
+of the API (and actual examples), see :doc:`/core-api/dma-api-howto`.
 
 This API is split into two pieces.  Part I describes the basic API.
 Part II describes extensions for supporting non-consistent memory
@@ -471,7 +471,7 @@ without the _attrs suffixes, except that they pass an optional
 dma_attrs.
 
 The interpretation of DMA attributes is architecture-specific, and
-each attribute should be documented in Documentation/DMA-attributes.txt.
+each attribute should be documented in :doc:`/core-api/dma-attributes`.
 
 If dma_attrs are 0, the semantics of each of these functions
 is identical to those of the corresponding function
@@ -484,7 +484,7 @@ for DMA::
 
 	#include <linux/dma-mapping.h>
 	/* DMA_ATTR_FOO should be defined in linux/dma-mapping.h and
-	* documented in Documentation/DMA-attributes.txt */
+	* documented in Documentation/core-api/dma-attributes.rst */
 	...
 
 		unsigned long attr;
diff --git a/Documentation/core-api/dma-isa-lpc.rst b/Documentation/core-api/dma-isa-lpc.rst
index b1ec7b16c21f..e59a3d35a93d 100644
--- a/Documentation/core-api/dma-isa-lpc.rst
+++ b/Documentation/core-api/dma-isa-lpc.rst
@@ -17,7 +17,7 @@ To do ISA style DMA you need to include two headers::
 	#include <asm/dma.h>
 
 The first is the generic DMA API used to convert virtual addresses to
-bus addresses (see Documentation/DMA-API.txt for details).
+bus addresses (see :doc:`/core-api/dma-api` for details).
 
 The second contains the routines specific to ISA DMA transfers. Since
 this is not present on all platforms make sure you construct your
diff --git a/Documentation/driver-api/usb/dma.rst b/Documentation/driver-api/usb/dma.rst
index 59d5aee89e37..2b3dbd3265b4 100644
--- a/Documentation/driver-api/usb/dma.rst
+++ b/Documentation/driver-api/usb/dma.rst
@@ -10,7 +10,7 @@ API overview
 
 The big picture is that USB drivers can continue to ignore most DMA issues,
 though they still must provide DMA-ready buffers (see
-``Documentation/DMA-API-HOWTO.txt``).  That's how they've worked through
+:doc:`/core-api/dma-api-howto`).  That's how they've worked through
 the 2.4 (and earlier) kernels, or they can now be DMA-aware.
 
 DMA-aware usb drivers:
@@ -60,7 +60,7 @@ and effects like cache-trashing can impose subtle penalties.
   force a consistent memory access ordering by using memory barriers.  It's
   not using a streaming DMA mapping, so it's good for small transfers on
   systems where the I/O would otherwise thrash an IOMMU mapping.  (See
-  ``Documentation/DMA-API-HOWTO.txt`` for definitions of "coherent" and
+  :doc:`/core-api/dma-api-howto` for definitions of "coherent" and
   "streaming" DMA mappings.)
 
   Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
@@ -91,7 +91,7 @@ Working with existing buffers
 Existing buffers aren't usable for DMA without first being mapped into the
 DMA address space of the device.  However, most buffers passed to your
 driver can safely be used with such DMA mapping.  (See the first section
-of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?")
+of :doc:`/core-api/dma-api-howto`, titled "What memory is DMA-able?")
 
 - When you're using scatterlists, you can map everything at once.  On some
   systems, this kicks in an IOMMU and turns the scatterlists into single
diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt
index 34d041d68f78..604cee350e53 100644
--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -570,8 +570,8 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE 
 	[*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다:
 
 	    Documentation/driver-api/pci/pci.rst
-	    Documentation/DMA-API-HOWTO.txt
-	    Documentation/DMA-API.txt
+	    Documentation/core-api/dma-api-howto.rst
+	    Documentation/core-api/dma-api.rst
 
 
 데이터 의존성 배리어 (역사적)
@@ -1907,7 +1907,7 @@ Mandatory 배리어들은 SMP 시스템에서도 UP 시스템에서도 SMP 효
 
      writel_relaxed() 와 같은 완화된 I/O 접근자들에 대한 자세한 내용을 위해서는
      "커널 I/O 배리어의 효과" 섹션을, consistent memory 에 대한 자세한 내용을
-     위해선 Documentation/DMA-API.txt 문서를 참고하세요.
+     위해선 Documentation/core-api/dma-api.rst 문서를 참고하세요.
 
 
 =========================
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index a806227c1fad..656a4888c300 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -907,7 +907,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
  * @dir: dma direction
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static dma_addr_t sba_map_page(struct device *dev, struct page *page,
 			       unsigned long poff, size_t size,
@@ -1028,7 +1028,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size)
  * @dir:  R/W or both.
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
 			   enum dma_data_direction dir, unsigned long attrs)
@@ -1105,7 +1105,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @dma_handle:  IOVA of new buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void *
 sba_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
@@ -1162,7 +1162,7 @@ sba_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
  * @vaddr:  virtual address IOVA of "consistent" buffer.
  * @dma_handler:  IO virtual address of "consistent" buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void sba_free_coherent(struct device *dev, size_t size, void *vaddr,
 			      dma_addr_t dma_handle, unsigned long attrs)
@@ -1425,7 +1425,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
  * @dir:  R/W or both.
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
 			    int nents, enum dma_data_direction dir,
@@ -1524,7 +1524,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
  * @dir:  R/W or both.
  * @attrs: optional dma attributes
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
 			       int nents, enum dma_data_direction dir,
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 70cd24bdcfec..4f1596bb1936 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -3,7 +3,7 @@
 ** PARISC 1.1 Dynamic DMA mapping support.
 ** This implementation is for PA-RISC platforms that do not support
 ** I/O TLBs (aka DMA address translation hardware).
-** See Documentation/DMA-API-HOWTO.txt for interface definitions.
+** See Documentation/core-api/dma-api-howto.rst for interface definitions.
 **
 **      (c) Copyright 1999,2000 Hewlett-Packard Company
 **      (c) Copyright 2000 Grant Grundler
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 6b15a24930e0..fed67eafcacc 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -3,8 +3,8 @@
 #define _ASM_X86_DMA_MAPPING_H
 
 /*
- * IOMMU interface. See Documentation/DMA-API-HOWTO.txt and
- * Documentation/DMA-API.txt for documentation.
+ * IOMMU interface. See Documentation/core-api/dma-api-howto.rst and
+ * Documentation/core-api/dma-api.rst for documentation.
  */
 
 #include <linux/scatterlist.h>
diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c
index 17cb5b933dcf..e89031e9c847 100644
--- a/arch/x86/kernel/amd_gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -6,7 +6,7 @@
  * This allows to use PCI devices that only support 32bit addresses on systems
  * with more than 4GB.
  *
- * See Documentation/DMA-API-HOWTO.txt for the interface specification.
+ * See Documentation/core-api/dma-api-howto.rst for the interface specification.
  *
  * Copyright 2002 Andi Kleen, SuSE Labs.
  */
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 7e112829d250..5368452eb5a6 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -666,7 +666,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
  * @dev: instance of PCI owned by the driver that's asking
  * @mask:  number of address bits this PCI device can handle
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static int sba_dma_supported( struct device *dev, u64 mask)
 {
@@ -698,7 +698,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
  * @size:  number of bytes to map in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static dma_addr_t
 sba_map_single(struct device *dev, void *addr, size_t size,
@@ -788,7 +788,7 @@ sba_map_page(struct device *dev, struct page *page, unsigned long offset,
  * @size:  number of bytes mapped in driver buffer.
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void
 sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
@@ -867,7 +867,7 @@ sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
  * @size:  number of bytes mapped in driver buffer.
  * @dma_handle:  IOVA of new buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void *sba_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs)
@@ -898,7 +898,7 @@ static void *sba_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle
  * @vaddr:  virtual address IOVA of "consistent" buffer.
  * @dma_handler:  IO virtual address of "consistent" buffer.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void
 sba_free(struct device *hwdev, size_t size, void *vaddr,
@@ -933,7 +933,7 @@ int dump_run_sg = 0;
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static int
 sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@@ -1017,7 +1017,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
  * @nents:  number of entries in list
  * @direction:  R/W or both.
  *
- * See Documentation/DMA-API-HOWTO.txt
+ * See Documentation/core-api/dma-api-howto.rst
  */
 static void 
 sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 78f677cf45ab..ef2b153ddbd9 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -14,7 +14,7 @@
 
 /**
  * List of possible attributes associated with a DMA mapping. The semantics
- * of each attribute should be defined in Documentation/DMA-attributes.txt.
+ * of each attribute should be defined in Documentation/core-api/dma-attributes.rst.
  */
 
 /*
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index b89d5e31f172..34450f7ad510 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -31,7 +31,7 @@
  *	does memory allocation too using vmalloc_32().
  *
  * videobuf_dma_*()
- *	see Documentation/DMA-API-HOWTO.txt, these functions to
+ *	see Documentation/core-api/dma-api-howto.rst, these functions to
  *	basically the same.  The map function does also build a
  *	scatterlist for the buffer (and unmap frees it ...)
  *
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index d628ab09d97b..e8575b694cd8 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -1071,7 +1071,7 @@ static void check_unmap(struct dma_debug_entry *ref)
 	/*
 	 * Drivers should use dma_mapping_error() to check the returned
 	 * addresses of dma_map_single() and dma_map_page().
-	 * If not, print this warning message. See Documentation/DMA-API.txt.
+	 * If not, print this warning message. See Documentation/core-api/dma-api.rst.
 	 */
 	if (entry->map_err_type == MAP_ERR_NOT_CHECKED) {
 		err_printk(ref->dev, entry,
-- 
2.26.2

Re: [PATCH v2 14/15] docs: fix references for DMA*.txt files

[Christoph Hellwig]

On Tue, Jun 23, 2020 at 09:09:10AM +0200, Mauro Carvalho Chehab wrote:
> As we moved those files to core-api, fix references to point
> to their newer locations.

Can we please just revert the RST conversion that I didn't ACK?

[PATCH v2 15/15] docs: fs: proc.rst: convert a new chapter to ReST

[Mauro Carvalho Chehab]

A new chapter was added to proc.rst. Adjust the markups
to avoid this warning:

	Documentation/filesystems/proc.rst:2194: WARNING: Inconsistent literal block quoting.

And to properly mark the code-blocks there.

Fixes: 37e7647a7212 ("docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 Documentation/filesystems/proc.rst | 44 ++++++++++++++----------------
 1 file changed, 21 insertions(+), 23 deletions(-)

diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
index 53a0230a08e2..cc0fd2685562 100644
--- a/Documentation/filesystems/proc.rst
+++ b/Documentation/filesystems/proc.rst
@@ -2179,46 +2179,44 @@ subset=pid hides all top level files and directories in the procfs that
 are not related to tasks.
 
 5	Filesystem behavior
-----------------------------
+---------------------------
 
 Originally, before the advent of pid namepsace, procfs was a global file
 system. It means that there was only one procfs instance in the system.
 
 When pid namespace was added, a separate procfs instance was mounted in
 each pid namespace. So, procfs mount options are global among all
-mountpoints within the same namespace.
+mountpoints within the same namespace::
 
-::
+	# grep ^proc /proc/mounts
+	proc /proc proc rw,relatime,hidepid=2 0 0
 
-# grep ^proc /proc/mounts
-proc /proc proc rw,relatime,hidepid=2 0 0
+	# strace -e mount mount -o hidepid=1 -t proc proc /tmp/proc
+	mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0
+	+++ exited with 0 +++
 
-# strace -e mount mount -o hidepid=1 -t proc proc /tmp/proc
-mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0
-+++ exited with 0 +++
-
-# grep ^proc /proc/mounts
-proc /proc proc rw,relatime,hidepid=2 0 0
-proc /tmp/proc proc rw,relatime,hidepid=2 0 0
+	# grep ^proc /proc/mounts
+	proc /proc proc rw,relatime,hidepid=2 0 0
+	proc /tmp/proc proc rw,relatime,hidepid=2 0 0
 
 and only after remounting procfs mount options will change at all
-mountpoints.
+mountpoints::
 
-# mount -o remount,hidepid=1 -t proc proc /tmp/proc
+	# mount -o remount,hidepid=1 -t proc proc /tmp/proc
 
-# grep ^proc /proc/mounts
-proc /proc proc rw,relatime,hidepid=1 0 0
-proc /tmp/proc proc rw,relatime,hidepid=1 0 0
+	# grep ^proc /proc/mounts
+	proc /proc proc rw,relatime,hidepid=1 0 0
+	proc /tmp/proc proc rw,relatime,hidepid=1 0 0
 
 This behavior is different from the behavior of other filesystems.
 
 The new procfs behavior is more like other filesystems. Each procfs mount
 creates a new procfs instance. Mount options affect own procfs instance.
 It means that it became possible to have several procfs instances
-displaying tasks with different filtering options in one pid namespace.
+displaying tasks with different filtering options in one pid namespace::
 
-# mount -o hidepid=invisible -t proc proc /proc
-# mount -o hidepid=noaccess -t proc proc /tmp/proc
-# grep ^proc /proc/mounts
-proc /proc proc rw,relatime,hidepid=invisible 0 0
-proc /tmp/proc proc rw,relatime,hidepid=noaccess 0 0
+	# mount -o hidepid=invisible -t proc proc /proc
+	# mount -o hidepid=noaccess -t proc proc /tmp/proc
+	# grep ^proc /proc/mounts
+	proc /proc proc rw,relatime,hidepid=invisible 0 0
+	proc /tmp/proc proc rw,relatime,hidepid=noaccess 0 0
-- 
2.26.2