From: Guenter Roeck <linux@roeck-us.net>
To: Eugene Shalygin <eugene.shalygin@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>,
Denis Pauk <pauk.denis@gmail.com>,
Jean Delvare <jdelvare@suse.com>,
Jonathan Corbet <corbet@lwn.net>,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] hwmon: (asus-ec-sensors) add CPU core voltage
Date: Tue, 8 Feb 2022 15:30:48 -0800 [thread overview]
Message-ID: <20220208233048.GA2970774@roeck-us.net> (raw)
In-Reply-To: <20220208094244.1106312-1-eugene.shalygin@gmail.com>
On Tue, Feb 08, 2022 at 10:42:43AM +0100, Eugene Shalygin wrote:
> A user discovered [1] the CPU Core voltage sensor, which spans 2
> registers and provides output in mV. Althroug the discovery was made
> with a X470 chipset, the sensor is present in X570 (tested with C8H).
> For now simply add it to each board with the CPU current sensor present.
>
> [1] https://github.com/zeule/asus-ec-sensors/issues/12
>
> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
> Tested-by: Denis Pauk <pauk.denis@gmail.com>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> Documentation/hwmon/asus_ec_sensors.rst | 1 +
> drivers/hwmon/asus-ec-sensors.c | 29 ++++++++++++++++---------
> 2 files changed, 20 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
> index 22de1b037cfb..e7e8f1640f45 100644
> --- a/Documentation/hwmon/asus_ec_sensors.rst
> +++ b/Documentation/hwmon/asus_ec_sensors.rst
> @@ -39,6 +39,7 @@ The driver is aware of and reads the following sensors:
> 9. Readings from the "Water flow meter" header (RPM)
> 10. Readings from the "Water In" and "Water Out" temperature headers
> 11. CPU current
> +12. CPU core voltage
>
> Sensor values are read from EC registers, and to avoid race with the board
> firmware the driver acquires ACPI mutex, the one used by the WMI when its
> diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
> index dd7b207d062f..bfac08a5dc57 100644
> --- a/drivers/hwmon/asus-ec-sensors.c
> +++ b/drivers/hwmon/asus-ec-sensors.c
> @@ -18,6 +18,7 @@
> * - VRM Heat Sink fan RPM
> * - Water Flow fan RPM
> * - CPU current
> + * - CPU core voltage
> */
>
> #include <linux/acpi.h>
> @@ -100,6 +101,8 @@ enum ec_sensors {
> ec_sensor_temp_t_sensor,
> /* VRM temperature [℃] */
> ec_sensor_temp_vrm,
> + /* CPU Core voltage [mV] */
> + ec_sensor_in_cpu_core,
> /* CPU_Opt fan [RPM] */
> ec_sensor_fan_cpu_opt,
> /* VRM heat sink fan [RPM] */
> @@ -121,6 +124,7 @@ enum ec_sensors {
> #define SENSOR_TEMP_MB BIT(ec_sensor_temp_mb)
> #define SENSOR_TEMP_T_SENSOR BIT(ec_sensor_temp_t_sensor)
> #define SENSOR_TEMP_VRM BIT(ec_sensor_temp_vrm)
> +#define SENSOR_IN_CPU_CORE BIT(ec_sensor_in_cpu_core)
> #define SENSOR_FAN_CPU_OPT BIT(ec_sensor_fan_cpu_opt)
> #define SENSOR_FAN_VRM_HS BIT(ec_sensor_fan_vrm_hs)
> #define SENSOR_FAN_CHIPSET BIT(ec_sensor_fan_chipset)
> @@ -139,6 +143,8 @@ static const struct ec_sensor_info known_ec_sensors[] = {
> [ec_sensor_temp_t_sensor] =
> EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
> [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
> + [ec_sensor_in_cpu_core] =
> + EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2),
> [ec_sensor_fan_cpu_opt] =
> EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
> [ec_sensor_fan_vrm_hs] = EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
> @@ -172,32 +178,34 @@ static const struct dmi_system_id asus_ec_dmi_table[] __initconst = {
> SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "Pro WS X570-ACE",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
> - SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> + SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
> "ROG CROSSHAIR VIII DARK HERO",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
> SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
> - SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU),
> + SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW |
> + SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
> "ROG CROSSHAIR VIII FORMULA",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
> SENSOR_TEMP_VRM | SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
> - SENSOR_CURR_CPU),
> + SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG CROSSHAIR VIII HERO",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
> SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
> SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
> - SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU),
> + SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
> "ROG CROSSHAIR VIII HERO (WI-FI)",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
> SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
> SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
> - SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU),
> + SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
> "ROG CROSSHAIR VIII IMPACT",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
> - SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> + SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET |
> + SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX B550-E GAMING",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB |
> SENSOR_TEMP_T_SENSOR |
> @@ -205,17 +213,19 @@ static const struct dmi_system_id asus_ec_dmi_table[] __initconst = {
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX B550-I GAMING",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB |
> SENSOR_TEMP_T_SENSOR |
> - SENSOR_TEMP_VRM | SENSOR_FAN_VRM_HS | SENSOR_CURR_CPU),
> + SENSOR_TEMP_VRM | SENSOR_FAN_VRM_HS |
> + SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-E GAMING",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB |
> SENSOR_TEMP_T_SENSOR |
> - SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> + SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET |
> + SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-F GAMING",
> SENSOR_SET_TEMP_CHIPSET_CPU_MB |
> SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET),
> DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-I GAMING",
> SENSOR_TEMP_T_SENSOR | SENSOR_FAN_VRM_HS |
> - SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> + SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
> {}
> };
>
> @@ -467,7 +477,6 @@ static long scale_sensor_value(s32 value, int data_type)
> switch (data_type) {
> case hwmon_curr:
> case hwmon_temp:
> - case hwmon_in:
> return value * MILLI;
> default:
> return value;
next prev parent reply other threads:[~2022-02-08 23:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-08 9:42 [PATCH] hwmon: (asus-ec-sensors) add CPU core voltage Eugene Shalygin
2022-02-08 16:15 ` Oleksandr Natalenko
2022-02-08 20:54 ` Denis Pauk
2022-02-08 23:30 ` Guenter Roeck [this message]
2022-02-08 23:33 ` Eugene Shalygin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220208233048.GA2970774@roeck-us.net \
--to=linux@roeck-us.net \
--cc=corbet@lwn.net \
--cc=eugene.shalygin@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oleksandr@natalenko.name \
--cc=pauk.denis@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).