[PATCH bpf-next v7 0/1] Document BPF_MAP_TYPE_ARRAY

[PATCH bpf-next v7 0/1] Document BPF_MAP_TYPE_ARRAY

[Donald Hunter]

Add documentation for BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_PERCPU_ARRAY
variant, including kernel version introduced, usage and examples.

v6->v7:
- Remove 2^32 reference and reword paragraph
  reported by Jiri Olsa and Daniel Borkmann

v5->v6:
- Rework sample code into individual snippets
- Grammar mods suggested by Bagas Sanjaja

v4->v5:
- Use formatting consistent with *_TYPE_HASH docs
- Dropped cgroup doc patch from this set
- Fix grammar and typos reported by Bagas Sanjaya
- Fix typo and version reported by Donald Hunter
- Update examples to be libbpf v1 compatible

v3->v4:
- fix doctest failure due to missing newline

v2->v3:
- wrap text to 80 chars and add newline at end of file

v1->v2:
- point to selftests for functional examples
- update examples to follow kernel style
- add docs for BPF_F_MMAPABLE

Dave Tucker (1):
  bpf, docs: document BPF_MAP_TYPE_ARRAY

 Documentation/bpf/map_array.rst | 232 ++++++++++++++++++++++++++++++++
 1 file changed, 232 insertions(+)
 create mode 100644 Documentation/bpf/map_array.rst

-- 
2.35.1

[PATCH bpf-next v7 1/1] bpf, docs: document BPF_MAP_TYPE_ARRAY

[Donald Hunter]

From: Dave Tucker <dave@dtucker.co.uk>

Add documentation for the BPF_MAP_TYPE_ARRAY including kernel version
introduced, usage and examples. Also document BPF_MAP_TYPE_PERCPU_ARRAY
which is similar.

Signed-off-by: Dave Tucker <dave@dtucker.co.uk>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
 Documentation/bpf/map_array.rst | 232 ++++++++++++++++++++++++++++++++
 1 file changed, 232 insertions(+)
 create mode 100644 Documentation/bpf/map_array.rst

diff --git a/Documentation/bpf/map_array.rst b/Documentation/bpf/map_array.rst
new file mode 100644
index 000000000000..c3c56ffe5334
--- /dev/null
+++ b/Documentation/bpf/map_array.rst
@@ -0,0 +1,232 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+================================================
+BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_PERCPU_ARRAY
+================================================
+
+.. note::
+   - ``BPF_MAP_TYPE_ARRAY`` was introduced in kernel version 3.19
+   - ``BPF_MAP_TYPE_PERCPU_ARRAY`` was introduced in version 4.6
+
+``BPF_MAP_TYPE_ARRAY`` and ``BPF_MAP_TYPE_PERCPU_ARRAY`` provide generic array
+storage. The key type is an unsigned 32-bit integer (4 bytes) and the map is
+of constant size. The size of the array is defined in ``max_entries`` at
+creation time. All array elements are pre-allocated and zero initialized when
+created. ``BPF_MAP_TYPE_PERCPU_ARRAY`` uses a different memory region for each
+CPU whereas ``BPF_MAP_TYPE_ARRAY`` uses the same memory region. The value
+stored can be of any size, however, small values will be rounded up to 8
+bytes.
+
+Since kernel 5.5, memory mapping may be enabled for ``BPF_MAP_TYPE_ARRAY`` by
+setting the flag ``BPF_F_MMAPABLE``. The map definition is page-aligned and
+starts on the first page. Sufficient page-sized and page-aligned blocks of
+memory are allocated to store all array values, starting on the second page,
+which in some cases will result in over-allocation of memory. The benefit of
+using this is increased performance and ease of use since userspace programs
+would not be required to use helper functions to access and mutate data.
+
+Usage
+=====
+
+.. c:function::
+   void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+Array elements can be retrieved using the ``bpf_map_lookup_elem()`` helper.
+This helper returns a pointer into the array element, so to avoid data races
+with userspace reading the value, the user must use primitives like
+``__sync_fetch_and_add()`` when updating the value in-place. Access from
+userspace uses the libbpf API of the same name.
+
+.. c:function::
+   long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+
+Array elements can also be added using the ``bpf_map_update_elem()`` helper or
+libbpf API.
+
+``bpf_map_update_elem()`` returns 0 on success, or negative error in case of
+failure.
+
+Since the array is of constant size, ``bpf_map_delete_elem()`` is not supported.
+To clear an array element, you may use ``bpf_map_update_elem()`` to insert a
+zero value to that index.
+
+Per CPU Array
+-------------
+
+Values stored in ``BPF_MAP_TYPE_ARRAY`` can be accessed by multiple programs
+across different CPUs. To restrict storage to a single CPU, you may use a
+``BPF_MAP_TYPE_PERCPU_ARRAY``.
+
+When using a ``BPF_MAP_TYPE_PERCPU_ARRAY`` the ``bpf_map_update_elem()`` and
+``bpf_map_lookup_elem()`` helpers automatically access the hash slot for the
+current CPU.
+
+.. c:function::
+   void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu)
+
+The ``bpf_map_lookup_percpu_elem()`` helper can be used to lookup the array
+value for a specific CPU. Returns value on success , or ``NULL`` if no entry was
+found or ``cpu`` is invalid.
+
+Concurrency
+-----------
+
+Since kernel version 5.1, the BPF infrastructure provides ``struct bpf_spin_lock``
+to synchronize access.
+
+Examples
+========
+
+Please see the ``tools/testing/selftests/bpf`` directory for functional
+examples. The code samples below demonstrate API usage.
+
+Kernel BPF
+----------
+
+This snippet shows how to declare an array in a BPF program.
+
+.. code-block:: c
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_ARRAY);
+            __type(key, u32);
+            __type(value, long);
+            __uint(max_entries, 256);
+    } my_map SEC(".maps");
+
+
+This example BPF program shows how to access an array element.
+
+.. code-block:: c
+
+    int bpf_prog(struct __sk_buff *skb)
+    {
+            int index = load_byte(skb,
+                                  ETH_HLEN + offsetof(struct iphdr, protocol));
+            long *value;
+
+            if (skb->pkt_type != PACKET_OUTGOING)
+                    return 0;
+
+            value = bpf_map_lookup_elem(&my_map, &index);
+            if (value)
+                    __sync_fetch_and_add(value, skb->len);
+
+            return 0;
+    }
+
+Userspace
+---------
+
+BPF_MAP_TYPE_ARRAY
+~~~~~~~~~~~~~~~~~~
+
+This snippet shows how to create an array, using ``bpf_map_create_opts`` to
+set flags.
+
+.. code-block:: c
+
+    #include <bpf/libbpf.h>
+    #include <bpf/bpf.h>
+
+    int create_array() {
+            int fd;
+            LIBBPF_OPTS(bpf_map_create_opts, opts, .map_flags = BPF_F_MMAPABLE);
+            fd = bpf_map_create(BPF_MAP_TYPE_ARRAY,
+                                "example_array",       /* name */
+                                sizeof(__u32),         /* key size */
+                                sizeof(long),          /* value size */
+                                256,                   /* max entries */
+                                &opts);                /* create opts */
+            return fd;
+    }
+
+This snippet shows how to initialize the elements of an array.
+
+.. code-block:: c
+
+    int initialize_array(int fd) {
+            __u32 i;
+            long value;
+            int ret;
+
+            for (i = 0; i < 256; i++) {
+                    value = i;
+                    ret = bpf_map_update_elem(fd, &i, &value, BPF_ANY);
+                    if (ret < 0)
+                            return ret;
+            }
+
+            return ret;
+    }
+
+This snippet shows how to retrieve an element value from an array.
+
+.. code-block:: c
+
+    int lookup(int fd) {
+            __u32 index = 42;
+            long value;
+            int ret = bpf_map_lookup_elem(fd, &index, &value);
+            if (ret < 0)
+                    return ret;
+
+            /* use value here */
+            assert(value == 42);
+
+            return ret;
+    }
+
+BPF_MAP_TYPE_PERCPU_ARRAY
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This snippet shows how to initialize the elements of a per CPU array.
+
+.. code-block:: c
+
+    int initialize_array(int fd) {
+            int ncpus = libbpf_num_possible_cpus();
+            long values[ncpus];
+            __u32 i, j;
+            int ret;
+
+            for (i = 0; i < 256 ; i++) {
+                    for (j = 0; j < ncpus; j++)
+                            values[j] = i;
+                    ret = bpf_map_update_elem(fd, &i, &values, BPF_ANY);
+                    if (ret < 0)
+                            return ret;
+            }
+
+            return ret;
+    }
+
+This snippet shows how to access the per CPU elements of an array value.
+
+.. code-block:: c
+
+    int lookup(int fd) {
+            int ncpus = libbpf_num_possible_cpus();
+            __u32 index = 42, j;
+            long values[ncpus];
+            int ret = bpf_map_lookup_elem(fd, &index, &values);
+            if (ret < 0)
+                    return ret;
+
+            for (j = 0; j < ncpus; j++) {
+                    /* Use per CPU value here */
+                    assert(values[j] == 42);
+            }
+
+            return ret;
+    }
+
+Semantics
+=========
+
+As shown in the example above, when accessing a ``BPF_MAP_TYPE_PERCPU_ARRAY``
+in userspace, each value is an array with ``ncpus`` elements.
+
+When calling ``bpf_map_update_elem()`` the flag ``BPF_NOEXIST`` can not be used
+for these maps.
-- 
2.35.1

Re: [PATCH bpf-next v7 1/1] bpf, docs: document BPF_MAP_TYPE_ARRAY

[Alexei Starovoitov]

On Fri, Oct 7, 2022 at 9:39 AM Donald Hunter <donald.hunter@gmail.com> wrote:
>
> From: Dave Tucker <dave@dtucker.co.uk>
>
> Add documentation for the BPF_MAP_TYPE_ARRAY including kernel version
> introduced, usage and examples. Also document BPF_MAP_TYPE_PERCPU_ARRAY
> which is similar.
>
> Signed-off-by: Dave Tucker <dave@dtucker.co.uk>
> Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
> ---
>  Documentation/bpf/map_array.rst | 232 ++++++++++++++++++++++++++++++++
>  1 file changed, 232 insertions(+)
>  create mode 100644 Documentation/bpf/map_array.rst
>
> diff --git a/Documentation/bpf/map_array.rst b/Documentation/bpf/map_array.rst
> new file mode 100644
> index 000000000000..c3c56ffe5334
> --- /dev/null
> +++ b/Documentation/bpf/map_array.rst
> @@ -0,0 +1,232 @@
> +.. SPDX-License-Identifier: GPL-2.0-only
> +.. Copyright (C) 2022 Red Hat, Inc.
> +
> +================================================
> +BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_PERCPU_ARRAY
> +================================================
> +
> +.. note::
> +   - ``BPF_MAP_TYPE_ARRAY`` was introduced in kernel version 3.19
> +   - ``BPF_MAP_TYPE_PERCPU_ARRAY`` was introduced in version 4.6
> +
> +``BPF_MAP_TYPE_ARRAY`` and ``BPF_MAP_TYPE_PERCPU_ARRAY`` provide generic array
> +storage. The key type is an unsigned 32-bit integer (4 bytes) and the map is
> +of constant size. The size of the array is defined in ``max_entries`` at
> +creation time. All array elements are pre-allocated and zero initialized when
> +created. ``BPF_MAP_TYPE_PERCPU_ARRAY`` uses a different memory region for each
> +CPU whereas ``BPF_MAP_TYPE_ARRAY`` uses the same memory region. The value
> +stored can be of any size, however, small values will be rounded up to 8
> +bytes.

Actually all values are rounded up to 8.
Maybe we should say that all array elements are aligned to 8
instead of values are rounded?
Because values_size=4 stays as 4 from bpf prog pov.
The progs cannot access bytes 5,6,7,8 though that memory is consumed.

> +
> +Since kernel 5.5, memory mapping may be enabled for ``BPF_MAP_TYPE_ARRAY`` by
> +setting the flag ``BPF_F_MMAPABLE``. The map definition is page-aligned and
> +starts on the first page. Sufficient page-sized and page-aligned blocks of
> +memory are allocated to store all array values, starting on the second page,
> +which in some cases will result in over-allocation of memory. The benefit of
> +using this is increased performance and ease of use since userspace programs
> +would not be required to use helper functions to access and mutate data.
> +
> +Usage
> +=====
> +
> +.. c:function::
> +   void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
> +
> +Array elements can be retrieved using the ``bpf_map_lookup_elem()`` helper.
> +This helper returns a pointer into the array element, so to avoid data races
> +with userspace reading the value, the user must use primitives like
> +``__sync_fetch_and_add()`` when updating the value in-place. Access from
> +userspace uses the libbpf API of the same name.
> +
> +.. c:function::
> +   long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
> +
> +Array elements can also be added using the ``bpf_map_update_elem()`` helper or
> +libbpf API.
> +
> +``bpf_map_update_elem()`` returns 0 on success, or negative error in case of
> +failure.
> +
> +Since the array is of constant size, ``bpf_map_delete_elem()`` is not supported.
> +To clear an array element, you may use ``bpf_map_update_elem()`` to insert a
> +zero value to that index.
> +
> +Per CPU Array
> +-------------
> +
> +Values stored in ``BPF_MAP_TYPE_ARRAY`` can be accessed by multiple programs
> +across different CPUs. To restrict storage to a single CPU, you may use a
> +``BPF_MAP_TYPE_PERCPU_ARRAY``.
> +
> +When using a ``BPF_MAP_TYPE_PERCPU_ARRAY`` the ``bpf_map_update_elem()`` and
> +``bpf_map_lookup_elem()`` helpers automatically access the hash slot for the
> +current CPU.

hash slot?
the copy paste went wrong? :)

> +
> +.. c:function::
> +   void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu)
> +
> +The ``bpf_map_lookup_percpu_elem()`` helper can be used to lookup the array
> +value for a specific CPU. Returns value on success , or ``NULL`` if no entry was
> +found or ``cpu`` is invalid.
> +
> +Concurrency
> +-----------
> +
> +Since kernel version 5.1, the BPF infrastructure provides ``struct bpf_spin_lock``
> +to synchronize access.
> +
> +Examples
> +========
> +
> +Please see the ``tools/testing/selftests/bpf`` directory for functional
> +examples. The code samples below demonstrate API usage.
> +
> +Kernel BPF
> +----------
> +
> +This snippet shows how to declare an array in a BPF program.
> +
> +.. code-block:: c
> +
> +    struct {
> +            __uint(type, BPF_MAP_TYPE_ARRAY);
> +            __type(key, u32);
> +            __type(value, long);
> +            __uint(max_entries, 256);
> +    } my_map SEC(".maps");
> +
> +
> +This example BPF program shows how to access an array element.
> +
> +.. code-block:: c
> +
> +    int bpf_prog(struct __sk_buff *skb)
> +    {
> +            int index = load_byte(skb,
> +                                  ETH_HLEN + offsetof(struct iphdr, protocol));
> +            long *value;

Please avoid using deprecated instructions like load_byte in examples.

> +
> +            if (skb->pkt_type != PACKET_OUTGOING)
> +                    return 0;
> +
> +            value = bpf_map_lookup_elem(&my_map, &index);
> +            if (value)
> +                    __sync_fetch_and_add(value, skb->len);
> +
> +            return 0;
> +    }
> +
> +Userspace
> +---------
> +
> +BPF_MAP_TYPE_ARRAY
> +~~~~~~~~~~~~~~~~~~
> +
> +This snippet shows how to create an array, using ``bpf_map_create_opts`` to
> +set flags.
> +
> +.. code-block:: c
> +
> +    #include <bpf/libbpf.h>
> +    #include <bpf/bpf.h>
> +
> +    int create_array() {
> +            int fd;
> +            LIBBPF_OPTS(bpf_map_create_opts, opts, .map_flags = BPF_F_MMAPABLE);

Add empty line pls.

> +            fd = bpf_map_create(BPF_MAP_TYPE_ARRAY,
> +                                "example_array",       /* name */
> +                                sizeof(__u32),         /* key size */
> +                                sizeof(long),          /* value size */
> +                                256,                   /* max entries */
> +                                &opts);                /* create opts */
> +            return fd;
> +    }
> +
> +This snippet shows how to initialize the elements of an array.
> +
> +.. code-block:: c
> +
> +    int initialize_array(int fd) {
> +            __u32 i;
> +            long value;
> +            int ret;
> +
> +            for (i = 0; i < 256; i++) {
> +                    value = i;
> +                    ret = bpf_map_update_elem(fd, &i, &value, BPF_ANY);
> +                    if (ret < 0)
> +                            return ret;
> +            }
> +
> +            return ret;
> +    }
> +
> +This snippet shows how to retrieve an element value from an array.
> +
> +.. code-block:: c
> +
> +    int lookup(int fd) {
> +            __u32 index = 42;
> +            long value;
> +            int ret = bpf_map_lookup_elem(fd, &index, &value);

Empty line pls.
Or better yet do 'int ret;'
and ret = bpf_map... on a separate line.

> +            if (ret < 0)
> +                    return ret;
> +
> +            /* use value here */
> +            assert(value == 42);
> +
> +            return ret;
> +    }
> +
> +BPF_MAP_TYPE_PERCPU_ARRAY
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +This snippet shows how to initialize the elements of a per CPU array.
> +
> +.. code-block:: c
> +
> +    int initialize_array(int fd) {
> +            int ncpus = libbpf_num_possible_cpus();
> +            long values[ncpus];
> +            __u32 i, j;
> +            int ret;
> +
> +            for (i = 0; i < 256 ; i++) {
> +                    for (j = 0; j < ncpus; j++)
> +                            values[j] = i;
> +                    ret = bpf_map_update_elem(fd, &i, &values, BPF_ANY);
> +                    if (ret < 0)
> +                            return ret;
> +            }
> +
> +            return ret;
> +    }
> +
> +This snippet shows how to access the per CPU elements of an array value.
> +
> +.. code-block:: c
> +
> +    int lookup(int fd) {
> +            int ncpus = libbpf_num_possible_cpus();
> +            __u32 index = 42, j;
> +            long values[ncpus];
> +            int ret = bpf_map_lookup_elem(fd, &index, &values);

same here.

> +            if (ret < 0)
> +                    return ret;
> +
> +            for (j = 0; j < ncpus; j++) {
> +                    /* Use per CPU value here */
> +                    assert(values[j] == 42);
> +            }
> +
> +            return ret;
> +    }
> +
> +Semantics
> +=========
> +
> +As shown in the example above, when accessing a ``BPF_MAP_TYPE_PERCPU_ARRAY``
> +in userspace, each value is an array with ``ncpus`` elements.
> +
> +When calling ``bpf_map_update_elem()`` the flag ``BPF_NOEXIST`` can not be used
> +for these maps.
> --
> 2.35.1
>

Re: [PATCH bpf-next v7 1/1] bpf, docs: document BPF_MAP_TYPE_ARRAY

[Donald Hunter]

Alexei Starovoitov <alexei.starovoitov@gmail.com> writes:

> On Fri, Oct 7, 2022 at 9:39 AM Donald Hunter <donald.hunter@gmail.com> wrote:
>
> Actually all values are rounded up to 8.
> Maybe we should say that all array elements are aligned to 8
> instead of values are rounded?
> Because values_size=4 stays as 4 from bpf prog pov.
> The progs cannot access bytes 5,6,7,8 though that memory is consumed.

Agreed, I will reword to mention alignment instead of rounding.

>> +When using a ``BPF_MAP_TYPE_PERCPU_ARRAY`` the ``bpf_map_update_elem()`` and
>> +``bpf_map_lookup_elem()`` helpers automatically access the hash slot for the
>> +current CPU.
>
> hash slot?
> the copy paste went wrong? :)

Good catch.

>> +    int bpf_prog(struct __sk_buff *skb)
>> +    {
>> +            int index = load_byte(skb,
>> +                                  ETH_HLEN + offsetof(struct iphdr, protocol));
>> +            long *value;
>
> Please avoid using deprecated instructions like load_byte in examples.

Will rewrite to use bpf_skb_load_bytes.

>> +    int create_array() {
>> +            int fd;
>> +            LIBBPF_OPTS(bpf_map_create_opts, opts, .map_flags = BPF_F_MMAPABLE);
>
> Add empty line pls.

Ack.

>> +    int lookup(int fd) {
>> +            __u32 index = 42;
>> +            long value;
>> +            int ret = bpf_map_lookup_elem(fd, &index, &value);
>
> Empty line pls.
> Or better yet do 'int ret;'
> and ret = bpf_map... on a separate line.

Ack.

>> +    int lookup(int fd) {
>> +            int ncpus = libbpf_num_possible_cpus();
>> +            __u32 index = 42, j;
>> +            long values[ncpus];
>> +            int ret = bpf_map_lookup_elem(fd, &index, &values);
>
> same here.

Ack. Thansk for the review!