[groeck-staging:hwmon-next 35/36] htmldocs: Documentation/hwmon/hs3001.rst:4: WARNING: Title underline too short.

[groeck-staging:hwmon-next 35/36] htmldocs: Documentation/hwmon/hs3001.rst:4: WARNING: Title underline too short.

[kernel test robot]

tree:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
head:   c944c8c532f7bd6d9e52ee3e2e97dcdd9c6014c0
commit: 33faa6fcc93f78e6b0e9b5aaf986446ac3c34047 [35/36] hwmon: Add driver for Renesas HS3001
reproduce: (https://download.01.org/0day-ci/archive/20230727/202307270449.YQ4vCUwO-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202307270449.YQ4vCUwO-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> Documentation/hwmon/hs3001.rst:4: WARNING: Title underline too short.
>> Documentation/hwmon/hs3001.rst:34: WARNING: Missing matching underline for section title overline.

vim +4 Documentation/hwmon/hs3001.rst

     2	
     3	Kernel driver HS3001
   > 4	===================
     5	
     6	Supported chips:
     7	
     8	  * Renesas HS3001, HS3002, HS3003, HS3004
     9	
    10	    Prefix: 'hs3001'
    11	
    12	    Addresses scanned: -
    13	
    14	    Datasheet: https://www.renesas.com/us/en/document/dst/hs300x-datasheet?r=417401
    15	
    16	Author:
    17	
    18	  - Andre Werner <andre.werner@systec-electronic.com>
    19	
    20	Description
    21	-----------
    22	
    23	This driver implements support for the Renesas HS3001 chips, a humidity
    24	and temperature family. Temperature is measured in degrees celsius, relative
    25	humidity is expressed as a percentage. In the sysfs interface, all values are
    26	scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
    27	
    28	The device communicates with the I2C protocol. Sensors have the I2C
    29	address 0x44 by default.
    30	
    31	sysfs-Interface
    32	---------------
    33	
  > 34	===============================================================================

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [groeck-staging:hwmon-next 35/36] htmldocs: Documentation/hwmon/hs3001.rst:4: WARNING: Title underline too short.

[Guenter Roeck]

On 7/26/23 13:39, kernel test robot wrote:
> tree:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
> head:   c944c8c532f7bd6d9e52ee3e2e97dcdd9c6014c0
> commit: 33faa6fcc93f78e6b0e9b5aaf986446ac3c34047 [35/36] hwmon: Add driver for Renesas HS3001
> reproduce: (https://download.01.org/0day-ci/archive/20230727/202307270449.YQ4vCUwO-lkp@intel.com/reproduce)
> 
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes: https://lore.kernel.org/oe-kbuild-all/202307270449.YQ4vCUwO-lkp@intel.com/
> 
> All warnings (new ones prefixed by >>):
> 
>>> Documentation/hwmon/hs3001.rst:4: WARNING: Title underline too short.
>>> Documentation/hwmon/hs3001.rst:34: WARNING: Missing matching underline for section title overline.
> 

Andre - no need to send a fix. I fixed it up.

Guenter

> vim +4 Documentation/hwmon/hs3001.rst
> 
>       2	
>       3	Kernel driver HS3001
>     > 4	===================
>       5	
>       6	Supported chips:
>       7	
>       8	  * Renesas HS3001, HS3002, HS3003, HS3004
>       9	
>      10	    Prefix: 'hs3001'
>      11	
>      12	    Addresses scanned: -
>      13	
>      14	    Datasheet: https://www.renesas.com/us/en/document/dst/hs300x-datasheet?r=417401
>      15	
>      16	Author:
>      17	
>      18	  - Andre Werner <andre.werner@systec-electronic.com>
>      19	
>      20	Description
>      21	-----------
>      22	
>      23	This driver implements support for the Renesas HS3001 chips, a humidity
>      24	and temperature family. Temperature is measured in degrees celsius, relative
>      25	humidity is expressed as a percentage. In the sysfs interface, all values are
>      26	scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
>      27	
>      28	The device communicates with the I2C protocol. Sensors have the I2C
>      29	address 0x44 by default.
>      30	
>      31	sysfs-Interface
>      32	---------------
>      33	
>    > 34	===============================================================================
>