From: Xin Li <xin3.li@intel.com>
To: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-edac@vger.kernel.org, linux-hyperv@vger.kernel.org,
kvm@vger.kernel.org, xen-devel@lists.xenproject.org
Cc: tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
dave.hansen@linux.intel.com, x86@kernel.org, hpa@zytor.com,
luto@kernel.org, pbonzini@redhat.com, seanjc@google.com,
peterz@infradead.org, jgross@suse.com, ravi.v.shankar@intel.com,
mhiramat@kernel.org, andrew.cooper3@citrix.com,
jiangshanlai@gmail.com, nik.borisov@suse.com,
shan.kang@intel.com
Subject: [PATCH v13 13/35] x86/ptrace: Cleanup the definition of the pt_regs structure
Date: Tue, 5 Dec 2023 02:50:02 -0800 [thread overview]
Message-ID: <20231205105030.8698-14-xin3.li@intel.com> (raw)
In-Reply-To: <20231205105030.8698-1-xin3.li@intel.com>
struct pt_regs is hard to read because the member or section related
comments are not aligned with the members.
The 'cs' and 'ss' members of pt_regs are type of 'unsigned long' while
in reality they are only 16-bit wide. This works so far as the
remaining space is unused, but FRED will use the remaining bits for
other purposes.
To prepare for FRED:
- Cleanup the formatting
- Convert 'cs' and 'ss' to u16 and embed them into an union
with a u64
- Fixup the related printk() format strings
Originally-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
---
Change since v12:
* Put comments ontop, not on the side (Borislav Petkov).
---
arch/x86/entry/vsyscall/vsyscall_64.c | 2 +-
arch/x86/include/asm/ptrace.h | 48 +++++++++++++++++++--------
arch/x86/kernel/process_64.c | 2 +-
3 files changed, 37 insertions(+), 15 deletions(-)
diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c
index e0ca8120aea8..a3c0df11d0e6 100644
--- a/arch/x86/entry/vsyscall/vsyscall_64.c
+++ b/arch/x86/entry/vsyscall/vsyscall_64.c
@@ -76,7 +76,7 @@ static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
if (!show_unhandled_signals)
return;
- printk_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
+ printk_ratelimited("%s%s[%d] %s ip:%lx cs:%x sp:%lx ax:%lx si:%lx di:%lx\n",
level, current->comm, task_pid_nr(current),
message, regs->ip, regs->cs,
regs->sp, regs->ax, regs->si, regs->di);
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index f4db78b09c8f..b268cd2a2d01 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -57,17 +57,19 @@ struct pt_regs {
#else /* __i386__ */
struct pt_regs {
-/*
- * C ABI says these regs are callee-preserved. They aren't saved on kernel entry
- * unless syscall needs a complete, fully filled "struct pt_regs".
- */
+ /*
+ * C ABI says these regs are callee-preserved. They aren't saved on
+ * kernel entry unless syscall needs a complete, fully filled
+ * "struct pt_regs".
+ */
unsigned long r15;
unsigned long r14;
unsigned long r13;
unsigned long r12;
unsigned long bp;
unsigned long bx;
-/* These regs are callee-clobbered. Always saved on kernel entry. */
+
+ /* These regs are callee-clobbered. Always saved on kernel entry. */
unsigned long r11;
unsigned long r10;
unsigned long r9;
@@ -77,18 +79,38 @@ struct pt_regs {
unsigned long dx;
unsigned long si;
unsigned long di;
-/*
- * On syscall entry, this is syscall#. On CPU exception, this is error code.
- * On hw interrupt, it's IRQ number:
- */
+
+ /*
+ * orig_ax is used on entry for:
+ * - the syscall number (syscall, sysenter, int80)
+ * - error_code stored by the CPU on traps and exceptions
+ * - the interrupt number for device interrupts
+ */
unsigned long orig_ax;
-/* Return frame for iretq */
+
+ /* The IRETQ return frame starts here */
unsigned long ip;
- unsigned long cs;
+
+ union {
+ /* The full 64-bit data slot containing CS */
+ u64 csx;
+ /* CS selector */
+ u16 cs;
+ };
+
unsigned long flags;
unsigned long sp;
- unsigned long ss;
-/* top of stack page */
+
+ union {
+ /* The full 64-bit data slot containing SS */
+ u64 ssx;
+ /* SS selector */
+ u16 ss;
+ };
+
+ /*
+ * Top of stack on IDT systems.
+ */
};
#endif /* !__i386__ */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 1553e19904e0..b924477c5ba8 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -117,7 +117,7 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode,
printk("%sFS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
log_lvl, fs, fsindex, gs, gsindex, shadowgs);
- printk("%sCS: %04lx DS: %04x ES: %04x CR0: %016lx\n",
+ printk("%sCS: %04x DS: %04x ES: %04x CR0: %016lx\n",
log_lvl, regs->cs, ds, es, cr0);
printk("%sCR2: %016lx CR3: %016lx CR4: %016lx\n",
log_lvl, cr2, cr3, cr4);
--
2.43.0
next prev parent reply other threads:[~2023-12-05 11:21 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 10:49 [PATCH v13 00/35] x86: enable FRED for x86-64 Xin Li
2023-12-05 10:49 ` [PATCH v13 01/35] x86/cpufeatures,opcode,msr: Add the WRMSRNS instruction support Xin Li
2023-12-11 5:14 ` Masami Hiramatsu
2024-01-02 15:34 ` Borislav Petkov
2024-01-02 22:06 ` Li, Xin3
2024-01-03 11:10 ` Borislav Petkov
2023-12-05 10:49 ` [PATCH v13 02/35] x86/entry: Remove idtentry_sysvec from entry_{32,64}.S Xin Li
2023-12-05 10:49 ` [PATCH v13 03/35] x86/trapnr: Add event type macros to <asm/trapnr.h> Xin Li
2023-12-05 10:49 ` [PATCH v13 04/35] Documentation/x86/64: Add a documentation for FRED Xin Li
2023-12-05 10:49 ` [PATCH v13 05/35] x86/fred: Add Kconfig option for FRED (CONFIG_X86_FRED) Xin Li
2023-12-05 10:49 ` [PATCH v13 06/35] x86/cpufeatures: Add the CPU feature bit for FRED Xin Li
2023-12-05 10:49 ` [PATCH v13 07/35] x86/fred: Disable FRED support if CONFIG_X86_FRED is disabled Xin Li
2024-01-22 13:08 ` Borislav Petkov
2023-12-05 10:49 ` [PATCH v13 08/35] x86/fred: Disable FRED by default in its early stage Xin Li
2024-01-22 13:19 ` Borislav Petkov
2023-12-05 10:49 ` [PATCH v13 09/35] x86/opcode: Add ERET[US] instructions to the x86 opcode map Xin Li
2023-12-05 10:49 ` [PATCH v13 10/35] x86/objtool: Teach objtool about ERET[US] Xin Li
2023-12-05 10:50 ` [PATCH v13 11/35] x86/cpu: Add X86_CR4_FRED macro Xin Li
2023-12-05 10:50 ` [PATCH v13 12/35] x86/cpu: Add MSR numbers for FRED configuration Xin Li
2023-12-05 10:50 ` Xin Li [this message]
2023-12-05 10:50 ` [PATCH v13 14/35] x86/ptrace: Add FRED additional information to the pt_regs structure Xin Li
2023-12-05 10:50 ` [PATCH v13 15/35] x86/fred: Add a new header file for FRED definitions Xin Li
2023-12-05 10:50 ` [PATCH v13 16/35] x86/fred: Reserve space for the FRED stack frame Xin Li
2023-12-05 10:50 ` [PATCH v13 17/35] x86/fred: Update MSR_IA32_FRED_RSP0 during task switch Xin Li
2023-12-05 10:50 ` [PATCH v13 18/35] x86/fred: Disallow the swapgs instruction when FRED is enabled Xin Li
2023-12-05 10:50 ` [PATCH v13 19/35] x86/fred: No ESPFIX needed " Xin Li
2023-12-05 10:50 ` [PATCH v13 20/35] x86/fred: Allow single-step trap and NMI when starting a new task Xin Li
2023-12-05 10:50 ` [PATCH v13 21/35] x86/fred: Make exc_page_fault() work for FRED Xin Li
2023-12-05 10:50 ` [PATCH v13 22/35] x86/idtentry: Incorporate definitions/declarations of the FRED entries Xin Li
2023-12-05 10:50 ` [PATCH v13 23/35] x86/fred: Add a debug fault entry stub for FRED Xin Li
2023-12-05 10:50 ` [PATCH v13 24/35] x86/fred: Add a NMI " Xin Li
2023-12-15 1:51 ` H. Peter Anvin
2023-12-15 18:37 ` Li, Xin3
2023-12-16 6:31 ` [PATCH v13A " Xin Li
2023-12-05 10:50 ` [PATCH v13 25/35] x86/fred: Add a machine check " Xin Li
2023-12-05 10:50 ` [PATCH v13 26/35] x86/fred: FRED entry/exit and dispatch code Xin Li
2023-12-05 12:25 ` Andrew Cooper
2023-12-05 19:03 ` Li, Xin3
2023-12-06 7:45 ` Li, Xin3
2023-12-06 14:11 ` Andrew Cooper
2023-12-06 19:19 ` Li, Xin3
2023-12-06 19:26 ` H. Peter Anvin
2023-12-06 19:58 ` Brian Gerst
2023-12-07 9:43 ` Li, Xin3
2023-12-09 21:42 ` [PATCH v13A " Xin Li
2024-01-26 10:05 ` Borislav Petkov
2023-12-05 10:50 ` [PATCH v13 27/35] x86/traps: Add sysvec_install() to install a system interrupt handler Xin Li
2023-12-05 10:50 ` [PATCH v13 28/35] x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled Xin Li
2023-12-05 10:50 ` [PATCH v13 29/35] x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user Xin Li
2023-12-05 10:50 ` [PATCH v13 30/35] x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code Xin Li
2023-12-05 10:50 ` [PATCH v13 31/35] x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI Xin Li
2023-12-05 10:50 ` [PATCH v13 32/35] KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling Xin Li
2023-12-05 10:50 ` [PATCH v13 33/35] x86/syscall: Split IDT syscall setup code into idt_syscall_init() Xin Li
2023-12-05 10:50 ` [PATCH v13 34/35] x86/fred: Add FRED initialization functions Xin Li
2023-12-05 10:50 ` [PATCH v13 35/35] x86/fred: Invoke FRED initialization code to enable FRED Xin Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231205105030.8698-14-xin3.li@intel.com \
--to=xin3.li@intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=jiangshanlai@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mhiramat@kernel.org \
--cc=mingo@redhat.com \
--cc=nik.borisov@suse.com \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=ravi.v.shankar@intel.com \
--cc=seanjc@google.com \
--cc=shan.kang@intel.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).