From: Jonathan Cameron <jic23@kernel.org>
To: David Lechner <dlechner@baylibre.com>
Cc: Jonathan Corbet <corbet@lwn.net>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Support Opensource <support.opensource@diasemi.com>,
Cosmin Tanislav <cosmin.tanislav@analog.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-iio@vger.kernel.org,
linux-staging@lists.linux.dev, linux-input@vger.kernel.org
Subject: Re: [PATCH RFC 3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage()
Date: Thu, 28 Mar 2024 14:20:38 +0000 [thread overview]
Message-ID: <20240328142038.33ad68bc@jic23-huawei> (raw)
In-Reply-To: <20240327-regulator-get-enable-get-votlage-v1-3-5f4517faa059@baylibre.com>
On Wed, 27 Mar 2024 18:18:52 -0500
David Lechner <dlechner@baylibre.com> wrote:
> We can reduce boilerplate code by using
> devm_regulator_get_enable_get_voltage().
>
> Signed-off-by: David Lechner <dlechner@baylibre.com>
A few comments inline, but nothing substantial.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> drivers/hwmon/da9052-hwmon.c | 33 +++++++--------------------------
> 1 file changed, 7 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
> index 2bd7ae8100d7..70e7bc72e980 100644
> --- a/drivers/hwmon/da9052-hwmon.c
> +++ b/drivers/hwmon/da9052-hwmon.c
> @@ -26,7 +26,6 @@ struct da9052_hwmon {
> struct mutex hwmon_lock;
> bool tsi_as_adc;
> int tsiref_mv;
> - struct regulator *tsiref;
> struct completion tsidone;
> };
>
> @@ -414,32 +413,19 @@ static int da9052_hwmon_probe(struct platform_device *pdev)
> device_property_read_bool(pdev->dev.parent, "dlg,tsi-as-adc");
>
> if (hwmon->tsi_as_adc) {
> - hwmon->tsiref = devm_regulator_get(pdev->dev.parent, "tsiref");
> - if (IS_ERR(hwmon->tsiref)) {
> - err = PTR_ERR(hwmon->tsiref);
> - dev_err(&pdev->dev, "failed to get tsiref: %d", err);
> + err = devm_regulator_get_enable_get_voltage(pdev->dev.parent,
> + "tsiref");
> + if (err < 0)
> return err;
> - }
> -
> - err = regulator_enable(hwmon->tsiref);
> - if (err)
> - return err;
> -
> - hwmon->tsiref_mv = regulator_get_voltage(hwmon->tsiref);
> - if (hwmon->tsiref_mv < 0) {
> - err = hwmon->tsiref_mv;
> - goto exit_regulator;
> - }
>
> /* convert from microvolt (DT) to millivolt (hwmon) */
> - hwmon->tsiref_mv /= 1000;
> + hwmon->tsiref_mv = err / 1000;
>
Using a variable called err for a good value is a bit ugly but fair enough if that
is precedence in this driver.
> }
> @@ -483,10 +466,8 @@ static void da9052_hwmon_remove(struct platform_device *pdev)
> {
> struct da9052_hwmon *hwmon = platform_get_drvdata(pdev);
>
> - if (hwmon->tsi_as_adc) {
> + if (hwmon->tsi_as_adc)
> da9052_free_irq(hwmon->da9052, DA9052_IRQ_TSIREADY, hwmon);
Superficially looks like devm_da9052_request_irq could be added that
uses devm_request_threaded_irq() to allow dropping this remaining handling.
Thanks,
Jonathan
> - regulator_disable(hwmon->tsiref);
> - }
> }
>
> static struct platform_driver da9052_hwmon_driver = {
>
next prev parent reply other threads:[~2024-03-28 14:20 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-27 23:18 [PATCH RFC 0/7] regulator: new APIs for voltage reference supplies David Lechner
2024-03-27 23:18 ` [PATCH RFC 1/7] regulator: devres: add APIs for " David Lechner
2024-03-28 13:47 ` Jonathan Cameron
2024-03-28 15:54 ` David Lechner
2024-03-28 18:03 ` Dmitry Torokhov
2024-03-28 18:18 ` Mark Brown
2024-03-28 20:17 ` Dmitry Torokhov
2024-03-28 20:25 ` Mark Brown
2024-03-30 16:02 ` Jonathan Cameron
2024-03-27 23:18 ` [PATCH RFC 2/7] hwmon: (adc128d818) Use devm_regulator_get_optional_enable_get_voltage() David Lechner
2024-03-28 14:05 ` Jonathan Cameron
2024-03-27 23:18 ` [PATCH RFC 3/7] hwmon: (da9052) Use devm_regulator_get_enable_get_voltage() David Lechner
2024-03-28 14:20 ` Jonathan Cameron [this message]
2024-03-28 15:20 ` Guenter Roeck
2024-03-28 15:53 ` Jonathan Cameron
2024-03-27 23:18 ` [PATCH RFC 4/7] iio: addac: ad74115: " David Lechner
2024-03-28 13:58 ` Jonathan Cameron
2024-03-27 23:18 ` [PATCH RFC 5/7] iio: frequency: admv1013: " David Lechner
2024-03-28 13:51 ` Jonathan Cameron
2024-03-27 23:18 ` [PATCH RFC 6/7] staging: iio: impedance-analyzer: " David Lechner
2024-03-28 13:50 ` Jonathan Cameron
2024-03-27 23:18 ` [PATCH RFC 7/7] Input: mpr121: " David Lechner
2024-03-28 14:21 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240328142038.33ad68bc@jic23-huawei \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=antoniu.miclaus@analog.com \
--cc=broonie@kernel.org \
--cc=corbet@lwn.net \
--cc=cosmin.tanislav@analog.com \
--cc=dlechner@baylibre.com \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jdelvare@suse.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=linux@roeck-us.net \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox