linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Patrick Rohr <prohr@google.com>
To: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>, Jonathan Corbet <corbet@lwn.net>,
	 David Ahern <dsahern@kernel.org>
Cc: netdev@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, "Patrick Rohr" <prohr@google.com>,
	"Maciej Żenczykowski" <maze@google.com>,
	"Lorenzo Colitti" <lorenzo@google.com>,
	"David Lamparter" <equinox@opensourcerouting.org>,
	"Simon Horman" <horms@kernel.org>
Subject: [PATCH net-next v2] Add support for PIO p flag
Date: Mon, 29 Jul 2024 15:00:59 -0700	[thread overview]
Message-ID: <20240729220059.3018247-1-prohr@google.com> (raw)

draft-ietf-6man-pio-pflag is adding a new flag to the Prefix Information
Option to signal that the network can allocate a unique IPv6 prefix per
client via DHCPv6-PD (see draft-ietf-v6ops-dhcp-pd-per-device).

When ra_honor_pio_pflag is enabled, the presence of a P-flag causes
SLAAC autoconfiguration to be disabled for that particular PIO.

An automated test has been added in Android (r.android.com/3195335) to
go along with this change.

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Lamparter <equinox@opensourcerouting.org>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Patrick Rohr <prohr@google.com>
---
 Documentation/networking/ip-sysctl.rst | 14 ++++++++++++++
 include/linux/ipv6.h                   |  1 +
 include/net/addrconf.h                 | 10 +++++++---
 net/ipv6/addrconf.c                    | 15 ++++++++++++++-
 4 files changed, 36 insertions(+), 4 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 3616389c8c2d..eacf8983e230 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -2362,6 +2362,20 @@ ra_honor_pio_life - BOOLEAN
 
 	Default: 0 (disabled)
 
+ra_honor_pio_pflag - BOOLEAN
+	The Prefix Information Option P-flag indicates the network can
+	allocate a unique IPv6 prefix per client using DHCPv6-PD.
+	This sysctl can be enabled when a userspace DHCPv6-PD client
+	is running to cause the P-flag to take effect: i.e. the
+	P-flag suppresses any effects of the A-flag within the same
+	PIO. For a given PIO, P=1 and A=1 is treated as A=0.
+
+	- If disabled, the P-flag is ignored.
+	- If enabled, the P-flag will disable SLAAC autoconfiguration
+	  for the given Prefix Information Option.
+
+	Default: 0 (disabled)
+
 accept_ra_rt_info_min_plen - INTEGER
 	Minimum prefix length of Route Information in RA.
 
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 383a0ea2ab91..a6e2aadbb91b 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -89,6 +89,7 @@ struct ipv6_devconf {
 	__u8		ioam6_enabled;
 	__u8		ndisc_evict_nocarrier;
 	__u8		ra_honor_pio_life;
+	__u8		ra_honor_pio_pflag;
 
 	struct ctl_table_header *sysctl_header;
 };
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 62a407db1bf5..b18e81f0c9e1 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -37,10 +37,14 @@ struct prefix_info {
 		struct __packed {
 #if defined(__BIG_ENDIAN_BITFIELD)
 			__u8	onlink : 1,
-			 	autoconf : 1,
-				reserved : 6;
+				autoconf : 1,
+				routeraddr : 1,
+				preferpd : 1,
+				reserved : 4;
 #elif defined(__LITTLE_ENDIAN_BITFIELD)
-			__u8	reserved : 6,
+			__u8	reserved : 4,
+				preferpd : 1,
+				routeraddr : 1,
 				autoconf : 1,
 				onlink : 1;
 #else
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 55a0fd589fc8..4febf679a435 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -239,6 +239,7 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = {
 	.ioam6_id_wide		= IOAM6_DEFAULT_IF_ID_WIDE,
 	.ndisc_evict_nocarrier	= 1,
 	.ra_honor_pio_life	= 0,
+	.ra_honor_pio_pflag	= 0,
 };
 
 static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
@@ -302,6 +303,7 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
 	.ioam6_id_wide		= IOAM6_DEFAULT_IF_ID_WIDE,
 	.ndisc_evict_nocarrier	= 1,
 	.ra_honor_pio_life	= 0,
+	.ra_honor_pio_pflag	= 0,
 };
 
 /* Check if link is ready: is it up and is a valid qdisc available */
@@ -2762,6 +2764,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao)
 	u32 addr_flags = 0;
 	struct inet6_dev *in6_dev;
 	struct net *net = dev_net(dev);
+	bool ignore_autoconf = false;
 
 	pinfo = (struct prefix_info *) opt;
 
@@ -2864,7 +2867,8 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao)
 
 	/* Try to figure out our local address for this prefix */
 
-	if (pinfo->autoconf && in6_dev->cnf.autoconf) {
+	ignore_autoconf = READ_ONCE(in6_dev->cnf.ra_honor_pio_pflag) && pinfo->preferpd;
+	if (pinfo->autoconf && in6_dev->cnf.autoconf && !ignore_autoconf) {
 		struct in6_addr addr;
 		bool tokenized = false, dev_addr_generated = false;
 
@@ -6926,6 +6930,15 @@ static const struct ctl_table addrconf_sysctl[] = {
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= SYSCTL_ONE,
 	},
+	{
+		.procname	= "ra_honor_pio_pflag",
+		.data		= &ipv6_devconf.ra_honor_pio_pflag,
+		.maxlen		= sizeof(u8),
+		.mode		= 0644,
+		.proc_handler	= proc_dou8vec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	{
 		.procname	= "accept_ra_rtr_pref",
-- 
2.46.0.rc1.232.g9752f9e123-goog


             reply	other threads:[~2024-07-29 22:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-29 22:00 Patrick Rohr [this message]
2024-07-30  0:06 ` [PATCH net-next v2] Add support for PIO p flag Maciej Żenczykowski
2024-07-31 12:50 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240729220059.3018247-1-prohr@google.com \
    --to=prohr@google.com \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=equinox@opensourcerouting.org \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo@google.com \
    --cc=maze@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).